Thank you for your submission.

Your entry has been submitted successfully.

The solution is this 1 inch Round Natural Detail Brush. This brush features two inch natural bristles which are stiff enough to get deep into crevices yet soft enough to prevent scratches. The bristles are epoxy set in a plastic ferrule to prevent scratching wheel or paint surfaces. The lacquered wooden handle is complete with a hang-up hole.

The only APC you need for every auto surface!

BLACKFIRE APC All Purpose Cleaner brings new meaning to the word "versatile." Used full-strength, it is an aggressive, grease-cutting cleaner for engine compartments and wheels. When diluted 4:1 in the included 36 oz. Detail Bottle, it's a gentle cleaner for leather seats and paintwork. Dilute BLACKFIRE APC All Purpose Cleaner to clean virtually anything, safely and effectively. It's the only APC you need!

Think of all the materials that make up your vehicle: metal, plastics, rubber, vinyl, leather. Now think of all the different cleaners available for each surface. There are a lot, right? You could try them all or you could buy one bottle of BLACKFIRE APC All Purpose Cleaner. It works on all those surfaces and you have the power to adjust the dilution ratio as needed.

How can one cleaner work on greasy engine parts and on leather upholstery? BLACKFIRE APC All Purpose Cleaner is made with advanced, proprietary cleaning technology that is safe on your vehicle's delicate surfaces and safe for the environment.

Use BLACKFIRE APC All Purpose Cleaner full strength as a bug and tar remover for paintwork, metal, and glass. Degrease the engine compartment and remove stubborn brake dust from wheels and wheel wells.

Dilute BLACKFIRE APC All Purpose Cleaner 4:1 with water to clean the dashboard, door panels, and trim. Remove spots and spills from finished leather seats. Clean plastics and paint.

BLACKFIRE APC All Purpose Cleaner is excellent on boats and RVs, too. You'll find countless uses for detailing and general cleaning.

BLACKFIRE APC All Purpose Cleaner is an outstanding value for professional detailers and do-it-yourselfers. At a dilution ratio of 4:1, one 20 oz. bottle makes up to four bottles of APC! Use it full strength for tough cleaning jobs.

BLACKFIRE APC All Purpose Cleaner is the only cleaner you need, no matter what you're cleaning.

Features:

• Use full strength on wheels, tires, engine components, and exterior trim.
• Dilute 4:1 with water to safely clean leather, paint, fabric, carpet, plastics, and vinyl.
• Removes dirt, oil, grease, insects, tar, brake dust, food stains, and more.
• Environmentally friendly.

BLACKFIRE APC All-Purpose Cleaner has an unlimited amount of uses - tires, undercarriages, and in this case, your floor liners!

Directions:

For tough cleaning jobs, spray full strength onto surface. Agitate with a brush or towel if needed. Rinse off. For interior surfaces, dilute 4:1 in a spray bottle. Spray on and wipe off. Test for colorfastness of carpet, upholstery, and leather in a small, inconspicuous area. Spray on and allow to dwell for 30 seconds. Agitate with a brush and pat dry with a towel.

Combo includes:
128 oz. APC All Purpose Cleaner
36 oz. Detail Bottle

The 16 Inch Wire Wheel Brush was designed for reaching between spokes and around rims to remove baked on brake dust, caked on road grime, grease, oil and anything else that wheels collect from the road. Without the proper tools, wheel care is a bear. These cone-shaped brushes easily address the intricacies of all models and sizes of wheels and spokes, no matter how uniquely shaped, making upkeep easier than ever. Appropriate tools greatly reduce the time it takes to tackle any job.

Don’t wrestle with the wrong brush or cloth — it will only frustrate you! Your results will be much more satisfying when you utilize a tool that’s made for the task. These wheel brushes have stiff, yet non-scratching bristles to remove offensive dirt and grime.

The same great features as regular Flexible Backing Plates!

• Velcro ® brand hook & loop ensures complete seating of polishing pad
• Molded urethane construction contours to body panels
• Fits all standard threaded rotary polishers

The 2 7/8 Inch Flexible Rotary Blacking Plate by Lake Country sets the standard in low-profile rotary backing plates for “spot-buff” sized polishing pads! A high-quality, multi-piece construction ensures that these backing plates are long lasting. The steel threads are sunk into a rugged plastic core which is surrounded by a low profile molded urethane. A Velcro ® brand hook & loop allows for easy pad changes.

The 2 7/8 Inch Flexible Rotary Blacking Plate by Lake Country features a Velcro ® brand hook & loop backing runs the full length of the backing plate giving your polishing pad a large surface to adhere to. The Velcro ® is attached to the backing pad with a specially designed, temperature-resistant glue that withstands the high heat created by polishing.

Additionally, the 2 7/8 Inch Flexible Rotary Backing Plate, like other Flexible Backing Plates from Lake Country, are made from a mutli-piece construction, with each part serving a purpose. The standard steel thread is sunk into a rugged, temperature resistant core. A molded low-profile urethane surrounds the core to create a flexible, yet stiff surface that allows your pads to mold to body contours The result is complete control of your polishing pad, regardless of the complexity of the body design.

This tiny backing plate is made with the same rugged construction of other Flexible Backing Plates. Ideal for use with spot polishing pads such as the Lake Country 4 Inch Hydro Tech Pads, Lake Country CCS 3.5 Inch Pads, and Lake Country 3.5 Inch Flat Pads.

Super plush 100% genuine Sheep wool on one side, combined with a nylon mesh overlay on the other. The Sheepskin & Mesh Wash Mitt offers the best of both worlds. Genuine Sheep Wool is a luxurious natural material. It is ever so gentle, and always non-abrasive. The super-soft long strands of wool in the Sheepskin & Mesh Wash Mitt hold an abundance of soapy water, loosening dirt and filtering it away from your car’s surface.

The unique nylon mesh side of the Sheepskin & Mesh Wash Mitt is woven to gently scrub away even the toughest, most glued on bug-guts and turnpike tar! The mesh grabs the offending grime at its base, where it meets the surface, prying and lifting the dirt away.

The Lake Country Wool-Ball attaches to your drill to turn it into a serious polishing tool. The Lake Country Wool-Ball cleans and polishes between spokes, around wheel lips, into the barrel of the wheel, and into concave spots where regular polishing pads cannot. You can use the Lake Country Wool-Ball to polish metal, paint, fiberglass, gel coats, and composites. The diminutive 3 inch design is perfect for polishing projects such as intake manifolds, trim pieces, and brackets.

Use the Lake Country Wool-Ball to remove moderate to severe paint defects from hard-to-reach areas. Combine with a BLACKFIRE Metal Polish to level scratches and restore gloss. You should follow it up with BLACKFIRE Metal Sealant to protect your metal for the future

The Lake Country Wool-Ball also works great when polishing aluminum surfaces. Use with BLACKFIRE Metal Polish to restore faded, oxidized, or damaged aluminum finishes. The rugged 360 degree design allows your polish and correct areas that a normal pad cannot.

100% twisted wool gives the Lake Country Wool-Ball impressive polishing power and rugged construction. A durable rubber core and a carbon steel hex shaft keep mean the Wool-Ball is built to last. It is also extremely easy-to-use. Simply attach to a normal drill.

3 Inch Diameter

The Cobra Guzzler HD is thirsty for water!

The 36 Ounce Detail Bottle is perfect for the enthusiast or professional who purchases their detailing supplies in bulk. Constructed of extremely durable PVC, the 36 Ounce Detail Bottle can handle serious cleaners and acids. The clear construction and graduated measuring labels, in both standard and metric increments, make it easy to measure your favorite chemicals precisely. If you need to dilute your chemicals a dilution ration chart is also clearly labeled. The included heavy-duty, chemical-resistant sprayer is adjustable from a fine mist to a powerful stream.

BLACKFIRE Midnight Sun Ivory Carnauba Paste is a hand poured premium carnauba wax that combines a mile deep shimmering gloss with high tech Wet Diamond polymers. It brings out the best in all paint finishes with a combination of super-refined carnauba wax blended with nourishing oils and Wet Diamond polymers. This wax creates incredible depth of shine on all paint colors with a hard, protective barrier to the elements. BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax is perfect on top of BLACKFIRE Paint Sealant or by itself. It glimmers with depth either way!

Midnight Sun is used on the most prestigious show cars thanks to its complex blend of ivory carnauba wax and Wet Diamond Polymers.

Midnight Sun Ivory Carnauba Paste Wax is a pure wax without any cleaning properties. It is designed to create maximum shine on new, painted metal or painted fiberglass finishes. If your vehicle is two years old or older, we strongly recommend claying the vehicle with BLACKFIRE Poly Clay and Clay Lubricant to remove paint contamination. Then polish with BLACKFIRE Paint Cleaner before applying this Wet-Ice over Fire finish. The wax will bond better and have a clearer, crisper shine.

BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax is more resistant to washings than a typical carnauba wax. One of the drawbacks of any carnauba wax is durability. Our tests in Florida during the summer have demonstrated water beading after 100 days. The polymers used to fortify Midnight Sun are very resistant to high heat and detergent washings but BLACKFIRE’s Ice over Fire shine was designed for a particular "look," not for ultimate durability. To get the best shine AND durability, use Midnight Sun as a topper over BLACKFIRE Wet Diamond All Finish Paint Protection.

Between details, spray and wipe the finish with BLACKFIRE Instant Detailer or BLACKFIRE Carnauba Spray Wax to maintain a high gloss and prolong the protection.

Directions:

Apply BLACKFIRE Midnight Sun Ivory Carnauba Paste  by hand or dual-action polisher using a soft applicator pad. Apply a thin even coat onto a section at a time and  hand buff to a brilliant shine with a microfiber towel. Do not allow Midnight Sun Ivory Carnauba Paste to haze. For best results apply to properly prepared paint or on top of cured BLACKFIRE Paint Sealant.

3 oz.

From tire-shredding muscle cars to 4-door family haulers, BLACKFIRE car care products are guaranteed to turn heads and create WHIPLASH! Check out the shimmering reflections created by BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax on this 1971 Plymouth 'Cuda

Mount your 5.5 inch polishing pads with complete confidence!
Velcro ® brand hook & loop ensures complete seating of polishing pad
Molded urethane construction contours to body panels
Fits all standard threaded rotary polishers.

The 4.75 Inch Flexible Rotary Blacking Plate by Lake Country sets the standard in low-profile rotary backing plates for medium sized polishing pads of all types! A high-quality, multi-piece construction ensures that these backing plates are long lasting. The steel threads are sunk into a rugged plastic core which is surrounded by a low profile molded urethane. A Velcro ® brand hook & loop allows for easy pad changes.

The 4.75 Inch Flexible Rotary Blacking Plate by Lake Country features a Velcro ® brand hook & loop backing runs the full length of the backing plate giving your polishing pad a large surface to adhere to. The Velcro ® is attached to the backing pad with a specially designed, temperature-resistant glue that withstands the high heat created by polishing.

Additionally, the 4.75 Inch Flexible Rotary Backing Plates are made from a mutli-piece construction, with each part serving a purpose. The standard steel thread is sunk into a rugged, temperature resistant core. A molded low-profile urethane surrounds the core to create a flexible, yet stiff surface that allows your pads to mold to body contours. The result is complete control of your polishing pad, regardless of the complexity of the body design.

The 4.75 Inch Flexible Rotary Backing Plate mounts 5.5 Inch pads such as CCS 5.5 Inch Pads, Flat 5.5 Inch Pads, or Hydro-Tech Low-Profile 5.5 Inch Pads for best results. Can also be used with a 6.5 Inch Pad for users desiring maximum cushion.

• Prewax cleaner
• Paint Polish
• Paint Cleaner
• Cleaner wax

• Sealant
• Paint Polish
• Paint Cleaner
• Metal Sealant

• Paint Polish/Cleaner
• Paint Deox
• Paint Compound
• Metal/Chrome Polish

• Extreme Shine
• Final Wax Buff
• Wax Application
• Sealant
• Metal Sealant

• Paint Polish/Cleaner
• Paint De-oxidate
• Paint Compound
• Paint Scratch Remover

Use the 5 Gallon Professional Wash Bucket with a Grit Guard Insert to protect your vehicle from scratch-causing grit. It does more for your vehicle than an ordinary wash bucket!

Every detailer needs a Professional 5 Gallon Car Wash Bucket. This large bucket is perfect for washing vehicles of all sizes. The wide mouth accommodates most wash brushes and tools.

The Grit Guard has a radial grid surface that scrapes dirt out of your mitt or sponge. Four quadrants at the base of the Grit Guard calm the wash water and hold the grid above the bottom of the bucket. Dirt falls to the bottom and stays there. The raised radial surface fits in the bottom of any 5 gallon bucket and extracts grit from your wash mitt or sponge when you drag it across the Grit Guard.

Make washing your vehicle safer with the 5 Gallon Professional Wash Bucket with Grit Guard.

Includes 5 gallon bucket and 1 Grit Guard Insert.

Featuring EXCLUSIVE hybrid foam technology - new & improved!

Years of careful research and development have led to Lake Country Force Hybrid Foam Pads! This innovative collection of pads is manufactured with the state-of-the-art foam compositions you won't find anywhere else, Lake Country Hybrid Foam, but now new and improved! Each pad has a denser composition and thicker foam to provide more control and superior cutting or polishing action. Lake Country Force Hybrid Foam Pads stand up to the rigors of machine detailing, time after time.

What makes Lake Country Force Hybrid Foam Pads different? Think of it this way: you wouldn't use a soft foam sponge to apply a polish. The abrasives would get lost in the cells. Tighter and dense foam is better to keep the abrasives in contact with the surface being polished. Lake Country Force Hybrid Foam Pads take that rationale a step farther with ultra dense foam compositions that keep the product on top of the foam, where it belongs.

The detailing world is forever evolving and advancing – much to the benefit of all of us! New types of polishing machines are being introduced, and foam pad manufacturers like Lake Country are keeping up admirably. With forced rotation polishers, like the FLEX XC3401, it was found that thicker pads generally outperformed smaller, thinner pads and is more user friendly.

Lake Country Force Hybrid Foam Pads are 1.25 inches thick and feature a tapered edge design (pictured) for a totally unique compounding and polishing experience. Due to high density foam, these pads are long-wearing and maintain their shape through many uses.

Lake Country Force Hybrid Foam Pads are available in the following types of foam:

	5.25 inch Force Hybrid Blue Wool Pad This wool pad is similar to the regular purple foamed wool pad but has more foam in the core, making it denser. The foam-wool composition means this pad sheds less, cuts better, and leaves a smoother finish than a standard wool pad.
	5.5 inch Lake Country Force Hybrid Grey Pad This Force Hybrid foam pad provides the high level of cut expected from a heavy foam cutting pad, but finishes like a foam finishing pad! It removes moderate to severe paint imperfections like swirls, scratches, and marring.
	5.5 inch Lake Country Force Hybrid Orange Pad This light cutting pad features super dense construction which enables it to remove defects quickly without compressing, like softer pads can. This pad will remove light to moderate paint imperfections like swirls, scratches, and light marring.
	5.5 inch Lake Country Force Hybrid White Pad The white Force Hybrid pad features very dense foam. Use this pad to remove light imperfections, apply a light polish, cleaner wax, and any jobs for which you'd use the standard Lake Country white polishing pad.
	5.5 inch Lake Country Force Hybrid Black Pad This pad provides no mechanical cutting ability but thanks to its dense foam, it provides superior control while polishing. It features super soft foam, which makes it ideal for finishing polishes, waxes, sealants, and glazes.
	5.5 inch Lake Country Force Hybrid Red Pad This soft, Force Hybrid foam is ideal for applying the final coat of wax or sealant. The foam works especially well when applying liquid waxes or sealants because it is firm enough to keep the majority of the product on the paint, rather than soaking it up.

The backing material on each pad is 5 inch, which makes it perfect for use with a 5 inch backing plate, a 4 inch backing plate is suitable as well.

Wash Lake Country Force Hybrid Foam Pads with BLACKFIRE Citrus Pad Cleaner and lay flat to dry with the backing material facing up. Store dry pads in sealed bags or bins to prevent contamination between uses.

The Lake Country Force Hybrid Foam Pads are like nothing you've tried before. The dense, long-wearing foam compositions maximize product performance to create a flawless finish every time.

Perfect for 6.5 inch and larger polishing pads!
Velcro ® brand hook & loop ensures complete seating of polishing pad
Molded urethane construction contours to body panels
Fits all standard threaded rotary polishers.

The 6 Inch Flexible Rotary Blacking Plate by Lake Country sets the standard in low-profile rotary backing plates for medium-to-large sized pads. A high-quality, multi-piece construction ensures that these backing plates are long lasting. The steel threads are sunk into a rugged plastic core which is surrounded by a low profile molded urethane. A Velcro ® brand hook & loop allows for easy pad changes.

The 6 Inch Flexible Rotary Blacking Plate by Lake Country features a Velcro ® brand hook & loop backing runs the full length of the backing plate giving your polishing pad a large surface to adhere to. The Velcro ® is attached to the backing pad with a specially designed, temperature-resistant glue that withstands the high heat created by polishing.

Additionally, the 6 Inch Flexible Rotary Backing Plates are made from a mutli-piece construction, with each part serving a purpose. The standard steel thread is sunk into a rugged, temperature-resistant core. A molded low-profile urethane surrounds the core to create a flexible, yet stiff surface that allows your pads to mold to body contours. The result is complete control of your polishing pad, regardless of the complexity of the body design.

Use the 6 Inch Flexible Rotary Blacking Plate to mount 6.5 inch or large pads including CCS 6.5 Inch Pads, Flat 6.5 Inch Pads, Hydro-Tech 6.5 Inch Pads, CCS Curved Edge 7.5 Inch Pads, and more.

The Cobra Guzzler HD is thirsty for water!

Lake Country Flat Foam Pads are made of imported German foam. These 6.5” pads have been improved with hook and loop fasteners edge to edge. Lake Country pads reduce heat build-up and spontaneous heat transfer between the machine and the pad. More pad-to-paint contact allows you to work more efficiently than you could with variable contact pads.

An advanced bonding system permanently attaches the hook & loop material to the pad to prevent slipping and detachment. Advanced foam compositions and user-friendly design will make your polishing experience safer for your vehicle and easier for you.

Gray Finishing Foam 6.5 inch Pad - Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.

Lake Country Flat Foam Pads are made of imported German foam. These 6.5” pads have been improved with hook and loop fasteners edge to edge. Lake Country pads reduce heat build-up and spontaneous heat transfer between the machine and the pad. More pad-to-paint contact allows you to work more efficiently than you could with variable contact pads.

An advanced bonding system permanently attaches the hook & loop material to the pad to prevent slipping and detachment. Advanced foam compositions and user-friendly design will make your polishing experience safer for your vehicle and easier for you.

Blue Finessing Foam 6.5 inch Pad – Flat pad has soft composition for applying glaze, finishing polish, sealants, and liquid waxes. Flat pad provides full contact with paint surface to minimize the pressure applied by the user. Use the blue pad to remove products or for final buffing.

Green Flat Polishing/AIO Foam 6.5 inch Pad - Use this foam to apply one-step cleaner waxes. It is a balance of polishing and finishing that is perfect for all-in-one product application.

For fast removal of serious of paint defects!

• High level of cutting power
• Remove oxidation, severe scratches, and sanding marks
• Long-lasting, 4-ply twisted wool fibers

The DuroWool 6.5 Inch 4-Ply Twisted Wool Cutting Pad by Lake Country creates an aggressive cutting action for fast removal of the most severe paint defects. Dull sanded surfaces, deep scratches, oxidation, bug staining and rain etching don't stand a chance. Like all Lake Country products, the DuroWool 100% Twisted Wool Cutting Pad is made of the highest quality materials for long-lasting performance.

Lake Country's DuroWool pads are made of 4-ply wool that is tightly twisted into individual yarns. This gives the wool a high level of aggression for extended periods of time. Each wool strand is 1 inch long for maximum operating life. Wool pads increase the surface area of the pad, allowing more polish to work at a given time. DuroWool 6.5 Inch 100% Twisted Wool Cutting Pads allow air to flow between the individual strands, keeping the surface temperature cooler to avoid overheating the paint.

To maintain maximum performance of your DuroWool pad clean the pad after each section with a Lake Country Wool Pad Spur. Wash your Lake Country DuroWool pad frequently using a System 2000 Pad Washer to maintain maximum performance.

The Lake Country DuroWool 6.5 100% Twisted Wool Cutting Pad will deliver maximize cutting power when used with a 6 Inch Rotary Backing Plate on a rotary polisher. Use a heavy cut compound in combination with moderate to high rotary speeds, between 1200-1800 rpm, for fast removal of serious paint defects.

Lake Country Flat Foam Pads are made of imported German foam. These 6.5” pads have been improved with hook and loop fasteners edge to edge. Lake Country pads reduce heat build-up and spontaneous heat transfer between the machine and the pad. More pad-to-paint contact allows you to work more efficiently than you could with variable contact pads.

An advanced bonding system permanently attaches the hook & loop material to the pad to prevent slipping and detachment. Advanced foam compositions and user-friendly design will make your polishing experience safer for your vehicle and easier for you.

Orange Light Cutting Foam 6.5 inch Pad - Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections.

Lake Country Flat Foam Pads are made of imported German foam. These 6.5” pads have been improved with hook and loop fasteners edge to edge. Lake Country pads reduce heat build-up and spontaneous heat transfer between the machine and the pad. More pad-to-paint contact allows you to work more efficiently than you could with variable contact pads.

An advanced bonding system permanently attaches the hook & loop material to the pad to prevent slipping and detachment. Advanced foam compositions and user-friendly design will make your polishing experience safer for your vehicle and easier for you.

White Flat Polishing Foam 6.5 inch Pad - High absorption foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so its perfect for pre-wax cleaners.

Get complete control of large polishing pads!
Velcro ® brand hook & loop ensures complete seating of polishing pad
Molded urethane construction contours to body panels
Fits all standard threaded rotary polishers.

The 7 Inch Flexible Rotary Blacking Plate by Lake Country sets the standard in low-profile rotary backing plates for large pads. A high-quality, multi-piece construction ensures that these backing plates are long lasting. The steel threads are sunk into a rugged plastic core which is surrounded by a low profile molded urethane. A Velcro ® brand hook & loop allows for easy pad changes.

The 7 Inch Flexible Rotary Blacking Plate by Lake Country features a Velcro ® brand hook & loop backing runs the full length of the backing plate giving your polishing pad a large surface to adhere to. The Velcro ® is attached to the backing pad with a specially designed, temperature-resistant glue that withstands the high heat created by polishing.

Additionally, the 7 Inch Flexible Rotary Backing Plates are made from a mutli-piece construction, with each part serving a purpose. The standard steel thread is sunk into a rugged, temperature-resistant core. A molded low-profile urethane surrounds the core to create a flexible, yet stiff surface that allows your pads to mold to body contours. The result is complete control of your polishing pad, regardless of the complexity of the body design.

Use the 7 Inch Flexible Rotary Backing Plate with large polishing pads such as the CCS Curved Edge 8.5 Inch Pads.

• Prewax cleaner
• Paint Polish
• Paint Cleaner
• Cleaner wax

• Sealant
• Paint Polish
• Paint Cleaner
• Metal Sealant

• Paint Polish/Cleaner
• Paint Deox
• Paint Compound
• Metal/Chrome Polish

• Extreme Shine
• Final Wax Buff
• Wax Application
• Sealant
• Metal Sealant

• Paint Polish/Cleaner
• Paint De-oxidate
• Paint Compound
• Paint Scratch Remover

Blackfire Midnight Sun Carnauba Paste Wax creates a deep, wet gloss that shimmers like water on this black Ferrari 458 Italia.

Welcome to BlackFireWax.com!

The Advanced Curved Edge 7.5 Inch CCS Foam Pad Kit is a versatile collection of foam pads by Lake Country Manufacturing. These curved edge pads can be used with a dual action or circular polishers with 6 inch backing plates. This pad kit does double duty!

The pads in this kit feature CCS Technology. CCS stands for Collapsed Cell Structure. CCS Technology is Lake Country’s innovative pad design that saves product by controlling product release onto the work surface. Dozens of dimples in the foam collect excess polish and reserve it until it is needed on the pad’s face (the area that is in contact with the paint). This design prolongs your working time and reduces product waste.

The Advanced Curved Edge 7.5 Inch CCS Foam Pad Kit includes:

CCS Orange Light Cutting 7.5 inch Foam Pad
An orange foam light cutting pad is included for general swirl and defect removal. They are less aggressive than the yellow pads. Use the orange pads to apply swirl removers and polishes.

2 CCS White Polishing 7.5 inch Foam Pads
The white foam pad is designed to apply cleaner waxes, micro-fine polishes, and light swirl removers. The foam is less dense than a cutting pad but more dense than a finishing pad.

CCS Black Finishing 7.5 inch Foam Pad
The black foam pad will apply waxes and paint sealants flawlessly. The soft foam is firm enough to remove light buffer swirls during final finishing.

CCS Blue Finessing 7.5 inch Foam Pad
Flat pad has soft composition for applying glaze, finishing polish, sealants, and liquid waxes. Flat pad provides full contact with paint surface to minimize the pressure applied by the user.

Kit includes:
1 CCS 7.5 inch Orange Light Cutting Pad
2 CCS 7.5 inch White Polishing Pads
1 CCS 7.5 inch Black Finishing Pad
1 CCS 7.5 inch Blue Finessing Pad
2 Cobra Microfiber Detailing Towels


A total retail value of $79.67. Save $9.68!

The Advanced Curved Edge 8.5 Inch CCS Foam Pad Kit is a versatile collection of foam pads by Lake Country Manufacturing. These curved edge pads work with a circular polisher to deliver smooth, shiny paint.

The pads in this kit feature CCS Technology. CCS stands for Collapsed Cell Structure. CCS Technology is Lake Country’s innovative pad design that saves product by controlling product release onto the work surface. Dozens of dimples in the foam collect excess polish and reserve it until it is needed on the pad’s face (the area that is in contact with the paint). This design prolongs your working time and reduces product waste.

The Advanced Curved Edge 8.5 Inch CCS Foam Pad Kit includes:

CCS 8.5 inch Yellow Cutting Foam Pad
The yellow cutting pad is made of dense foam with excellent leveling ability. Use these pads to apply compounds and heavy cut swirl removers. Yellow cutting pads should not be used on newer finishes.

CCS 8.5 inch Orange Light Cutting Foam Pad
An orange foam light cutting pad is included for general swirl and defect removal. They are less aggressive than the yellow pads. Use the orange pads to apply swirl removers and polishes.

CCS 8.5 inch White Flat Polishing Foam Pad
The white foam pad is designed to apply cleaner waxes, micro-fine polishes, and light swirl removers. The foam is less dense than a cutting pad but more dense than a finishing pad.

CCS 8.5 inch Black Finishing Foam Pad
The black foam pad will apply waxes and paint sealants flawlessly. The soft foam is firm enough to remove light buffer swirls during final finishing.

CCS 8.5 inch Blue Finessing Foam Pad
Flat pad has soft composition for applying glaze, finishing polish, sealants, and liquid waxes. Flat pad provides full contact with paint surface to minimize the pressure applied by the user.

Kit includes:
CCS 8.5 inch Yellow Cutting Pad
CCS 8.5 inch Orange Light Cutting Pad
CCS 8.5 inch White Polishing Pad
CCS 8.5 inch Black Finishing Pad
CCS 8.5 inch Blue Final Finishing Pad
2 Cobra Microfiber Towels, 16 x 16 inches

This kit has a total retail value of $80.24. Save $10.25!

BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax creates a mile-deep shimmering gloss that lasts longer than conventional carnauba waxes. Formulated using a complex blend of Wet Diamond Polymers premium ivory carnauba wax, Midnight Sun provides the utmost in paint protection. The visual impact created by Midnight Sun turns heads and creates WHIPLASH!

Quality Automotive Detailing Applicators are the Key to Hand Polishing and Waxing Success!

Your car favorite BLACKFIRE wax, paint sealant, protectant, car polish or pre-wax cleaner’s performance depends on the detailing applicator you use! Choose from our large variety of paint safe foam wax applicators and high quality microfiber detailing applicators to meet your car care needs. We realize that a vehicle is more than just a people mover, it's your pride and joy and should be treated as such. With the proper applicators and tools, using the entire BLACKFIE line to maintain your vehicle will be easier than ever!

CCS stands for Collapsed Cell Structure. CCS Technology is Lake Country’s innovative pad design that saves product by controlling product release onto the work surface. Dozens of dimples in the foam collect excess polish and reserve it until it is needed on the pad’s face (the area that is in contact with the paint). This design prolongs your working time and reduces product waste.

Slows rate of polish absorption – As discussed above, the pads are slow to absorb products and therefore the paint benefits from a longer working time. The same is true of liquid waxes and sealants.

Improves operator control – CCS pockets gradually release polish as needed by the operator. Since these areas are not absorbing polish, they serve as little reservoirs until the excess polish is needed.

Prevents pad skipping – CCS pockets reduce surface tension allowing the operator to run pad flat on a working surface. Basically, the CCS pockets break up the smooth surface of the foam to eliminate the sticking and skipping that occurs when two perfectly flat surfaces meet.

Creates less heat – CCS pockets provide several points where the foam is not  completely touching the paint. This reduces friction and therefore heat generated between the pad and the paint.

OEM approved - OEM tests confirm CCS pads out-perform convoluted pad designs.

The CCS 5.5 inch Foam Pads are a perfect fit on dual action polishers and orbital air sanders with a 5 inch backing plate.

Gray Micro-Chenille Mitt used for demonstration.

BLACKFIRE Advanced Pad Cleaner prolongs the usefulness of your buffing pads by removing product residues. When pads are cleaned thoroughly after every use, they maintain their texture and performance far longer. You'll save money and you'll get better results with your existing pads. Use Blackfire Advanced Pad Cleaner to clean foam and wool pads after every detail.

Blackfire Advanced Pad Cleaner is formulated specifically for the cleaning requirements of buffing pads. Polishes, waxes, and sealants can leave greasy residues inside the pores of foam pads and in the fibers of wool pads. If these residues are not removed, they can affect the performance of the next product applied with the same pad. For example, a pad with old polish residue in it can make the wax applied with the same pad look cloudy. It's not the wax's fault - the pad wasn't clean!

Spray each used pad with BLACKFIRE Advanced Pad Cleaner after using it to release oily residues.

For the best results, spray used pads generously with Blackfire Advanced Pad Cleaner as soon as you are finished with them. This will allow time for the cleaner to penetrate and it will prevent products from drying on the pads.

You've invested a lot in your buffing pads. Maintain them with Blackfire Advanced Pad Cleaner.

Directions:

Always clean pads soon after use. Spray pad generously with Advanced Pad Cleaner. Allow it to dwell for 30 seconds. Agitate pad with a foam pad conditioning brush. Rinse thoroughly with a stream of water.

32 oz.

BLACKFIRE Advanced Pad Cleaner prolongs the usefulness of your buffing pads by removing product residues. When pads are cleaned thoroughly after every use, they maintain their texture and performance far longer. You'll save money and you'll get better results with your existing pads. Use Blackfire Advanced Pad Cleaner to clean foam and wool pads after every detail.

Blackfire Advanced Pad Cleaner is formulated specifically for the cleaning requirements of buffing pads. Polishes, waxes, and sealants can leave greasy residues inside the pores of foam pads and in the fibers of wool pads. If these residues are not removed, they can affect the performance of the next product applied with the same pad. For example, a pad with old polish residue in it can make the wax applied with the same pad look cloudy. It's not the wax's fault - the pad wasn't clean!

Spray each used pad with BLACKFIRE Advanced Pad Cleaner after using it to release oily residues.

For the best results, spray used pads generously with Blackfire Advanced Pad Cleaner as soon as you are finished with them. This will allow time for the cleaner to penetrate and it will prevent products from drying on the pads.

You've invested a lot in your buffing pads. Maintain them with Blackfire Advanced Pad Cleaner.

Directions:

Always clean pads soon after use. Spray pad generously with Advanced Pad Cleaner. Allow it to dwell for 30 seconds. Agitate pad with a foam pad conditioning brush. Rinse thoroughly with a stream of water.

128 oz.

BLACKFIRE Advanced Pad Cleaner prolongs the usefulness of your buffing pads by removing product residues. When pads are cleaned thoroughly after every use, they maintain their texture and performance far longer. You'll save money and you'll get better results with your existing pads. Use Blackfire Advanced Pad Cleaner to clean foam and wool pads after every detail.

Blackfire Advanced Pad Cleaner is formulated specifically for the cleaning requirements of buffing pads. Polishes, waxes, and sealants can leave greasy residues inside the pores of foam pads and in the fibers of wool pads. If these residues are not removed, they can affect the performance of the next product applied with the same pad. For example, a pad with old polish residue in it can make the wax applied with the same pad look cloudy. It's not the wax's fault - the pad wasn't clean!

Spray each used pad with BLACKFIRE Advanced Pad Cleaner after using it to release oily residues.

For the best results, spray used pads generously with Blackfire Advanced Pad Cleaner as soon as you are finished with them. This will allow time for the cleaner to penetrate and it will prevent products from drying on the pads.

You've invested a lot in your buffing pads. Maintain them with Blackfire Advanced Pad Cleaner.

Directions:

Always clean pads soon after use. Spray pad generously with Advanced Pad Cleaner. Allow it to dwell for 30 seconds. Agitate pad with a foam pad conditioning brush. Rinse thoroughly with a stream of water.

5 Gallon (640 oz.)

BLACKFIRE Advanced Pad Cleaner prolongs the usefulness of your buffing pads by removing product residues. When pads are cleaned thoroughly after every use, they maintain their texture and performance far longer. You'll save money and you'll get better results with your existing pads. Use Blackfire Advanced Pad Cleaner to clean foam and wool pads after every detail.

Blackfire Advanced Pad Cleaner is formulated specifically for the cleaning requirements of buffing pads. Polishes, waxes, and sealants can leave greasy residues inside the pores of foam pads and in the fibers of wool pads. If these residues are not removed, they can affect the performance of the next product applied with the same pad. For example, a pad with old polish residue in it can make the wax applied with the same pad look cloudy. It's not the wax's fault - the pad wasn't clean!

When used on foam pads, Blackfire Advanced Pad Cleaner penetrates the foam pores and releases oily residue.  On wool pads, Blackfire Advanced Pad Cleaner releases oils from the fibers and restores the wool's texture. Pads will perform like new, time after time.

For the best results, spray used pads generously with Blackfire Advanced Pad Cleaner as soon as you are finished with them. This will allow time for the cleaner to penetrate and it will prevent products from drying on the pads.

You've invested a lot in your buffing pads. Maintain them with Blackfire Advanced Pad Cleaner.

Directions:

Always clean pads soon after use. Spray pad generously with Advanced Pad Cleaner. Allow it to dwell for 30 seconds. Agitate pad with a foam pad conditioning brush. Rinse thoroughly with a stream of water.

32 oz.

BLACKFIRE Advanced Pad Conditioner makes machine detailing easier by reducing friction between the pad and the paint. Products glide on more smoothly and the paint is protected from dry buffing. BLACKFIRE Advanced Pad Conditioner reduces skipping or sticking of the pad. Use it every time to prime your pads for perfection.

Dry buffing is what happens when a pad hasn't been primed. There is no lubrication between the pad and the paint to reduce friction. Even though there is polish on the pad, it takes several passes for the polish to completely cover the pad. In the meantime, you're dry buffing the paint! The result is fine scratches. This friction can also tear or prematurely wear out pads, causing you to replace them much sooner. BLACKFIRE Advanced Pad Conditioner protects pads and paint.

BLACKFIRE Advanced Pad Conditioner prevents dry buffing by moistening the pad face, what we call "priming the pad." It acts as a lubricant to eliminate the friction between the pad and the paint. In addition, BLACKFIRE Advanced Pad Conditioner opens up the foam's pores to accept the polish so it disperses evenly over the pad face. As soon as the pad touches the paint, it is already primed and ready to go!

Spray each fresh buffing pad with BLACKFIRE Advanced Pad Conditioner before using it.

Directions:

To use BLACKFIRE Advanced Pad Conditioner, mist a foam or wool pad before applying desired product to the pad. Proceed with normal product application. If the pad seems to "gum up," spray it again and continue buffing. If a product is difficult to buff off, mist the paint with Advanced Pad Conditioner and wipe the paint clean with a microfiber towel.

32 oz.

BLACKFIRE Advanced Pad Conditioner makes machine detailing easier by reducing friction between the pad and the paint. Products glide on more smoothly and the paint is protected from dry buffing. BLACKFIRE Advanced Pad Conditioner reduces skipping or sticking of the pad. Use it every time to prime your pads for perfection.

Dry buffing is what happens when a pad hasn't been primed. There is no lubrication between the pad and the paint to reduce friction. Even though there is polish on the pad, it takes several passes for the polish to completely cover the pad. In the meantime, you're dry buffing the paint! The result is fine scratches. This friction can also tear or prematurely wear out pads, causing you to replace them much sooner. BLACKFIRE Advanced Pad Conditioner protects pads and paint.

BLACKFIRE Advanced Pad Conditioner prevents dry buffing by moistening the pad face, what we call "priming the pad." It acts as a lubricant to eliminate the friction between the pad and the paint. In addition, BLACKFIRE Advanced Pad Conditioner opens up the foam's pores to accept the polish so it disperses evenly over the pad face. As soon as the pad touches the paint, it is already primed and ready to go!

Spray each fresh buffing pad with BLACKFIRE Advanced Pad Conditioner before using it.

Directions:

To use BLACKFIRE Advanced Pad Conditioner, mist a foam or wool pad before applying desired product to the pad. Proceed with normal product application. If the pad seems to "gum up," spray it again and continue buffing. If a product is difficult to buff off, mist the paint with Advanced Pad Conditioner and wipe the paint clean with a microfiber towel.

128 oz.

BLACKFIRE Advanced Pad Conditioner makes machine detailing easier by reducing friction between the pad and the paint. Products glide on more smoothly and the paint is protected from dry buffing. BLACKFIRE Advanced Pad Conditioner reduces skipping or sticking of the pad. Use it every time to prime your pads for perfection.

Dry buffing is what happens when a pad hasn't been primed. There is no lubrication between the pad and the paint to reduce friction. Even though there is polish on the pad, it takes several passes for the polish to completely cover the pad. In the meantime, you're dry buffing the paint! The result is fine scratches. This friction can also tear or prematurely wear out pads, causing you to replace them much sooner. BLACKFIRE Advanced Pad Conditioner protects pads and paint.

BLACKFIRE Advanced Pad Conditioner prevents dry buffing by moistening the pad face, what we call "priming the pad." It acts as a lubricant to eliminate the friction between the pad and the paint. In addition, BLACKFIRE Advanced Pad Conditioner opens up the foam's pores to accept the polish so it disperses evenly over the pad face. As soon as the pad touches the paint, it is already primed and ready to go!

Spray each fresh buffing pad with BLACKFIRE Advanced Pad Conditioner before using it.

Directions:

To use BLACKFIRE Advanced Pad Conditioner, mist a foam or wool pad before applying desired product to the pad. Proceed with normal product application. If the pad seems to "gum up," spray it again and continue buffing. If a product is difficult to buff off, mist the paint with Advanced Pad Conditioner and wipe the paint clean with a microfiber towel.

5 Gallons (640 oz.)

BLACKFIRE Advanced Pad Conditioner makes machine detailing easier by reducing friction between the pad and the paint. Products glide on more smoothly and the paint is protected from dry buffing. BLACKFIRE Advanced Pad Conditioner reduces skipping or sticking of the pad. Use it every time to prime your pads for perfection.

Dry buffing is what happens when a pad hasn't been primed. There is no lubrication between the pad and the paint to reduce friction. Even though there is polish on the pad, it takes several passes for the polish to completely cover the pad. In the meantime, you're dry buffing the paint! The result is fine scratches. This friction can also tear or prematurely wear out pads, causing you to replace them much sooner. BLACKFIRE Advanced Pad Conditioner protects pads and paint.

BLACKFIRE Advanced Pad Conditioner prevents dry buffing by moistening the pad face, what we call "priming the pad." It acts as a lubricant to eliminate the friction between the pad and the paint. In addition, BLACKFIRE Advanced Pad Conditioner opens up the foam's pores to accept the polish so it disperses evenly over the pad face. As soon as the pad touches the paint, it is already primed and ready to go!

Spray each fresh buffing pad with BLACKFIRE Advanced Pad Conditioner before using it.

Directions:

To use BLACKFIRE Advanced Pad Conditioner, mist a foam or wool pad before applying desired product to the pad. Proceed with normal product application. If the pad seems to "gum up," spray it again and continue buffing. If a product is difficult to buff off, mist the paint with Advanced Pad Conditioner and wipe the paint clean with a microfiber towel.

32 oz.

All purpose cleaning for all cleaning needs

BLACKFIRE APC All-Purpose Cleaner brings new meaning to the word "versatile." Used full-strength, it is an aggressive, grease-cutting cleaner for engine compartments and wheels. When diluted 4:1, it's a gentle cleaner for leather seats and paintwork. Dilute BLACKFIRE APC All-Purpose Cleaner to clean virtually anything, safely and effectively. It's the only APC you need!

Think of all the materials that make up your vehicle: metal, plastics, rubber, vinyl, leather. Now think of all the different cleaners available for each surface. There are a lot, right? You could try them all or you could buy one bottle of BLACKFIRE APC All-Purpose Cleaner. It works on all those surfaces and you have the power to adjust the dilution ratio as needed.

BLACKFIRE APC All-Purpose Cleaner has an unlimited amount of uses - tires, undercarriages, and in this case, your floor liners!

How can one cleaner work on greasy engine parts and on leather upholstery? BLACKFIRE APC All-Purpose Cleaner is made with advanced, proprietary cleaning technology that is safe on your vehicle's delicate surfaces and safe for the environment.

Use BLACKFIRE APC All-Purpose Cleaner full strength as a bug and tar remover for paintwork, metal, and glass. Degrease the engine compartment and remove stubborn brake dust from wheels and wheel wells. For general cleaning, dilute BLACKFIRE APC All-Purpose Cleaner 4:1 with water to clean the dashboard, door panels, and trim. Remove spots and spills from finished leather seats. Clean plastics and paint.  BLACKFIRE APC All-Purpose Cleaner is excellent on boats and RVs, too. BLACKFIRE APC All-Purpose Cleaner is the only cleaner you need, no matter what you're cleaning.

Directions:

For tough cleaning jobs, spray full strength onto surface. Agitate with a brush or towel if needed. Rinse off. For interior surfaces, dilute 4:1 in a spray bottle. Spray on and wipe off. Test for colorfastness of carpet, upholstery, and leather in a small, inconspicuous area. Spray on and allow to dwell for 30 seconds. Agitate with a brush and pat dry with a towel.

32 oz.

BLACKFIRE APC All-Purpose Cleaner brings new meaning to the word "versatile." Used full-strength, it is an aggressive, grease-cutting cleaner for engine compartments and wheels. When diluted 4:1, it's a gentle cleaner for leather seats and paintwork. Dilute BLACKFIRE APC All-Purpose Cleaner to clean virtually anything, safely and effectively. It's the only APC you need!

Think of all the materials that make up your vehicle: metal, plastics, rubber, vinyl, leather. Now think of all the different cleaners available for each surface. There are a lot, right? You could try them all or you could buy one bottle of BLACKFIRE APC All-Purpose Cleaner. It works on all those surfaces and you have the power to adjust the dilution ratio as needed.

BLACKFIRE APC All-Purpose Cleaner has an unlimited amount of uses - tires, undercarriages, and in this case, your floor liners!

How can one cleaner work on greasy engine parts and on leather upholstery? BLACKFIRE APC All-Purpose Cleaner is made with advanced, proprietary cleaning technology that is safe on your vehicle's delicate surfaces and safe for the environment.

Use BLACKFIRE APC All-Purpose Cleaner full strength as a bug and tar remover for paintwork, metal, and glass. Degrease the engine compartment and remove stubborn brake dust from wheels and wheel wells. For general cleaning, dilute BLACKFIRE APC All-Purpose Cleaner 4:1 with water to clean the dashboard, door panels, and trim. Remove spots and spills from finished leather seats. Clean plastics and paint. BLACKFIRE APC All-Purpose Cleaner is excellent on boats and RVs, too. BLACKFIRE APC All-Purpose Cleaner is the only cleaner you need, no matter what you're cleaning.

Directions:

For tough cleaning jobs, spray full strength onto surface. Agitate with a brush or towel if needed. Rinse off. For interior surfaces, dilute 4:1 in a spray bottle. Spray on and wipe off. Test for colorfastness of carpet, upholstery, and leather in a small, inconspicuous area. Spray on and allow to dwell for 30 seconds. Agitate with a brush and pat dry with a towel.

128 oz.

BLACKFIRE APC All-Purpose Cleaner brings new meaning to the word "versatile." Used full-strength, it is an aggressive, grease-cutting cleaner for engine compartments and wheels. When diluted 4:1, it's a gentle cleaner for leather seats and paintwork. Dilute BLACKFIRE APC All-Purpose Cleaner to clean virtually anything, safely and effectively. It's the only APC you need!

Think of all the materials that make up your vehicle: metal, plastics, rubber, vinyl, leather. Now think of all the different cleaners available for each surface. There are a lot, right? You could try them all or you could buy one bottle of BLACKFIRE APC All-Purpose Cleaner. It works on all those surfaces and you have the power to adjust the dilution ratio as needed.

BLACKFIRE APC All-Purpose Cleaner has an unlimited amount of uses - tires, undercarriages, and in this case, your floor liners!

How can one cleaner work on greasy engine parts and on leather upholstery? BLACKFIRE APC All-Purpose Cleaner is made with advanced, proprietary cleaning technology that is safe on your vehicle's delicate surfaces and safe for the environment.

Use BLACKFIRE APC All-Purpose Cleaner full strength as a bug and tar remover for paintwork, metal, and glass. Degrease the engine compartment and remove stubborn brake dust from wheels and wheel wells. For general cleaning, dilute BLACKFIRE APC All-Purpose Cleaner 4:1 with water to clean the dashboard, door panels, and trim. Remove spots and spills from finished leather seats. Clean plastics and paint.  BLACKFIRE APC All-Purpose Cleaner is excellent on boats and RVs, too. BLACKFIRE APC All-Purpose Cleaner is the only cleaner you need, no matter what you're cleaning.

Directions:

For tough cleaning jobs, spray full strength onto surface. Agitate with a brush or towel if needed. Rinse off. For interior surfaces, dilute 4:1 in a spray bottle. Spray on and wipe off. Test for colorfastness of carpet, upholstery, and leather in a small, inconspicuous area. Spray on and allow to dwell for 30 seconds. Agitate with a brush and pat dry with a towel.

32 oz.

If you live in a humid or hot part of the world the last thing you need is your wax coming off from just sitting in your driveway or taking a cruise to the grocery store. The BlackICE Hybrid Liquid Was is formulated with a heat-resistant protectant so you don’t have to worry about the wax bleeding, bubbling, or flaking in the hot sun.

1. Can be applied by hand or with a DA Random Orbital Polisher at a slow speed.
2. Shake well before use.
3. Working on a cool surface in the shade, apply a few pea-sized drops of product onto a foam wax applicator or finishing pad.
4. Spread a thin layer of product over the painted surface, working one panel at a time.
5. Allow product to cure for at least fifteen minutes for optimal bonding before removing excess.
6. Protip: The longer the cure, the better the bond! Make sure product has completely hazed over before removing
7. Remove excess with a clean, dry microfiber towel and buff to an ultimate wet-look finish.
8. Reapply every 3-4 months or as needed.

BLACKFIRE BlackICE Hybrid Montan Sealant Wax is the next generation of premium car wax. The perfect blend of refined ivory carnauba wax, purified montan wax and BLACKFIRE's Wet Diamond Polymer System, BlackICE creates a glistening shine across dark-colored paints. Not just a beauty wax, BlackICE offers extreme water beading and environmental protection for your automobile's paint with outstanding durability. BLACKFIRE BlackICE Hybrid Montan Sealant Wax can be applied on top of any BLACKFIRE paint sealant or by itself. Anyway you choose to apply it, your dark-colored paint will reflect with a liquified shine!

If you demand the best performance and stunning looks on your black or dark-colored automobile, this is the wax for you. BLACKFIRE BlackICE Hybrid Montan Sealant Wax doesn't just push the limits of premium wax performance -It explodes through them! BlackICE combines nature's best waxes with Wet Diamond Polymers to impart a wet, deep and highly reflective shine on all paint colors. This fusion of ingredients creates a hard shell of protection that offers outstanding durability, even in the torturous-tropical climate of South Florida.

Traditional carnauba car waxes offer great looks, at first. Often their reflective shine will fade faster then the protection they offer. This is because the glossy oils that give the wax its beauty quickly depart. BLACKFIRE BlackICE Hybrid Montan Sealant Wax features premium ivory carnauba wax that is blended with purified montan wax and synthetic polymers, not wetting oils, to create a super-wet shine that lasts. The carnauba wax used in BlackICE is BLACKFIRE's carefully-selected Brazilian T1 grade carnauba that has been refined into a bright white powder known as ivory carnauba. It is the highest grade of carnauba wax that exists.

Montan wax has been used in car waxes for centuries. This brittle mineral wax is often dark brown to light yellow in color, while offering several benefits when used to protect paint. This naturally-colored wax increases the reflectivity of the surface while providing high levels of water beading. The montan wax used in BlackICE is carefully purified to remove any impurities without disturbing the color. This gives BlackICE the a unique texture and deep black color, without the use of dyes. These pure ingredients create deep reflections that shimmer under a blanket of clarity. This head-turning shine will continue to draw admiring glances, and uncontrollable stares, long after it has been applied.

In order to create a premium paste wax that ignores the limitations of other waxes, BLACKFIRE fortified BlackICE with Wet Diamond Polymers. BLACKFIRE's Wet Diamond Polymers are an unique combination of three synthetic polymers from around the world. Each has been carefully selected to protect paint and create a rich shine. BLACKFIRE BlackICE Hybrid Montan Sealant Wax has been tested to last for 4-to-5 months when driving daily in Florida's tough climate. BlackICE provides outstanding protection against acid rain, bird bombs, bug splatter, and environmental fallout. Excellent water repellency offers outstandingly tight water beads that roll away from the paint. BLACKFIRE BlackICE utilizes the best features of each ingredient, then makes them better through synergistic excellence.

After properly cleaning and preparing the paint, BlackICE needs to be applied THIN.

Allow the wax to dry to a haze for 10 minutes and buff off residue using a Supreme 530 Microfiber Towel

Directions:

Always apply BLACKFIRE BlackICE Hybrid Montan Sealant Wax to clean paint out of direct sunlight. For the best results remove any impurities from the paint, and/or remove any defects with BLACKFIRE Poly Clay or the appropriate BLACKFIRE polish. Apply thinly to all of the automobile's paint by hand or dual-action polisher using a soft applicator pad. Do not apply to plastic trim. Allow to dry to a haze for ten minutes and remove using a soft microfiber towel such as a Supreme 530.

Includes two foam applicators.

7.4 oz.

BLACKFIRE BlackICE Hybrid Montan Sealant Wax is the next generation of premium car wax. The perfect blend of refined ivory carnauba wax, purified montan wax and BLACKFIRE's Wet Diamond Polymer System, BlackICE creates a glistening shine across dark-colored paints. Not just a beauty wax, BlackICE offers extreme water beading and environmental protection for your automobile's paint with outstanding durability. BLACKFIRE BlackICE Hybrid Montan Sealant Wax can be applied on top of any BLACKFIRE paint sealant or by itself. Anyway you choose to apply it, your dark-colored paint will reflect with a liquified shine!

If you demand the best performance and stunning looks on your black or dark-colored automobile, this is the wax for you. BLACKFIRE BlackICE Hybrid Montan Sealant Wax doesn't just push the limits of premium wax performance -It explodes through them! BlackICE combines nature's best waxes with Wet Diamond Polymers to impart a wet, deep and highly reflective shine on all paint colors. This fusion of ingredients creates a hard shell of protection that offers outstanding durability, even in the torturous-tropical climate of South Florida.

Traditional carnauba car waxes offer great looks, at first. Often their reflective shine will fade faster then the protection they offer. This is because the glossy oils that give the wax its beauty quickly depart. BLACKFIRE BlackICE Hybrid Montan Sealant Wax features premium ivory carnauba wax that is blended with purified montan wax and synthetic polymers, not wetting oils, to create a super-wet shine that lasts. The carnauba wax used in BlackICE is BLACKFIRE's carefully-selected Brazilian T1 grade carnauba that has been refined into a bright white powder known as ivory carnauba. It is the highest grade of carnauba wax that exists.

Montan wax has been used in car waxes for centuries. This brittle mineral wax is often dark brown to light yellow in color, while offering several benefits when used to protect paint. This naturally-colored wax increases the reflectivity of the surface while providing high levels of water beading. The montan wax used in BlackICE is carefully purified to remove any impurities without disturbing the color. This gives BlackICE the a unique texture and deep black color, without the use of dyes. These pure ingredients create deep reflections that shimmer under a blanket of clarity. This head-turning shine will continue to draw admiring glances, and uncontrollable stares, long after it has been applied.

In order to create a premium paste wax that ignores the limitations of other waxes, BLACKFIRE fortified BlackICE with Wet Diamond Polymers. BLACKFIRE's Wet Diamond Polymers are an unique combination of three synthetic polymers from around the world. Each has been carefully selected to protect paint and create a rich shine. BLACKFIRE BlackICE Hybrid Montan Sealant Wax has been tested to last for 4-to-5 months when driving daily in Florida's tough climate. BlackICE provides outstanding protection against acid rain, bird bombs, bug splatter, and environmental fallout. Excellent water repellency offers outstandingly tight water beads that roll away from the paint. BLACKFIRE BlackICE utilizes the best features of each ingredient, then makes them better through synergistic excellence.

After properly cleaning and preparing the paint, BlackICE needs to be applied THIN.

Allow the wax to dry to a haze for 10 minutes and buff off residue using a Supreme 530 Microfiber Towel

Directions:

Always apply BLACKFIRE BlackICE Hybrid Montan Sealant Wax to clean paint out of direct sunlight. For the best results remove any impurities from the paint, and/or remove any defects with BLACKFIRE Poly Clay or the appropriate BLACKFIRE polish. Apply thinly to all of the automobile's paint by hand or dual-action polisher using a soft applicator pad. Do not apply to plastic trim. Allow to dry to a haze for ten minutes and remove using a soft microfiber towel such as a Supreme 530.

3 oz.

Fill bucket with BLACKFIRE shampoo	Allow sponge to soak for 3-5 minutes
Gently scrub without applying pressure	Rinse - no more bugs or tar!

Spray Blackfire Bug Blocker onto the surface you want to protect

Spread it out evenly, and let it dry to a haze!

Spray Blackfire Bug Blocker onto the surface you want to protect

Spread it out evenly, and let it dry to a haze!

Spray Blackfire Bug Blocker onto the surface you want to protect

Spread it out evenly, and let it dry to a haze!

32 oz.

128 oz.

5 Gallon (640 oz.)

32 oz.

Towels priced for a professional’s bottom line!

Get a plethora of towels for your detailing needs at a price you can’t beat! These towels are soft and absorbent, perfect for many different detailing tasks. This towel can be used to effectively buff off waxes, remove polish residue, use a waterless wash, wipe down after a spray wax, and much more! And best of all, you can get them for LESS THAN $1.50 PER TOWEL! When it comes to buying in bulk, it doesn’t get any better than that!

Being a professional detailer is an enriching and profitable career. However, just like with any other business, there is a cost to doing business. And sometimes that cost can be quite high when it comes to purchasing your detailing products!

Towels, for instance, are one of the detailing products you will find your self buying more and more of throughout your detailing career. No matter how much you care for them, eventually you just have to accept that they are too worn out to continue using. Another consideration is to avoid cross contamination. You may not want to risk the potential for there still being abrasives remaining in the towel, so it’s sometimes best just to toss the towel out.

These unavoidable practices will lead to you needing to buy microfiber towels A LOT! And that translates into quite an impact on your bottom line as a professional detailer! Stop spending $7+ on your microfibers when you are just going to toss them aside soon anyway!

With our bulk microfiber towels, you will spend LESS THAN $1.50 PER TOWEL!

Saving THAT kind of money really helps when you are trying to beat out another detailers price!

Towels priced for a professional’s bottom line!

Get a plethora of towels for your detailing needs at a price you can’t beat! These towels are soft and absorbent, perfect for many different detailing tasks. This towel can be used to effectively buff off waxes, remove polish residue, use a waterless wash, wipe down after a spray wax, and much more! And best of all, you can get them for LESS THAN $1.50 PER TOWEL! When it comes to buying in bulk, it doesn’t get any better than that!

Being a professional detailer is an enriching and profitable career. However, just like with any other business, there is a cost to doing business. And sometimes that cost can be quite high when it comes to purchasing your detailing products!

Towels, for instance, are one of the detailing products you will find your self buying more and more of throughout your detailing career. No matter how much you care for them, eventually you just have to accept that they are too worn out to continue using. Another consideration is to avoid cross contamination. You may not want to risk the potential for there still being abrasives remaining in the towel, so it’s sometimes best just to toss the towel out.

These unavoidable practices will lead to you needing to buy microfiber towels A LOT! And that translates into quite an impact on your bottom line as a professional detailer! Stop spending $7+ on your microfibers when you are just going to toss them aside soon anyway!

With our bulk microfiber towels, you will spend LESS THAN $1.50 PER TOWEL!

Saving THAT kind of money really helps when you are trying to beat out another detailers price!

BLACKFIRE Car Wash cleans your vehicle and renews the shine every time you wash your car. BLACKFIRE Car Wash tri-polymers replenish and reinforce existing paint protection. Incredible Tuff Suds II technology creates mountains of suds to help float away grime and dirt, without scratching the finish. Drying agents help reduce water spotting and make drying easier. BLACKFIRE Car Wash helps your vehicle look just waxed after every wash!

Directions:

Work out of direct sunlight when washing with BLACKFIRE Car Wash. Dilute 1 ounce of shampoo in 3 gallons of water. Activate foam with a jet of water. Use a clean wash mitt or sponge to wash the vehicle, starting at the top. Rinse frequently. Do not allow shampoo to dry on the vehicle. Dry the vehicle with a waffle weave microfiber towel to prevent water spots.

128 oz.

BLACKFIRE Car Wash cleans your vehicle and renews the shine every time you wash your car. BLACKFIRE Car Wash tri-polymers replenish and reinforce existing paint protection. Incredible Tuff Suds II technology creates mountains of suds to help float away grime and dirt, without scratching the finish. Drying agents help reduce water spotting and make drying easier. BLACKFIRE Car Wash helps your vehicle look just waxed after every wash!

Directions:

Work out of direct sunlight when washing with BLACKFIRE Car Wash. Dilute 1 ounce of shampoo in 3 gallons of water. Activate foam with a jet of water. Use a clean wash mitt or sponge to wash the vehicle, starting at the top. Rinse frequently. Do not allow shampoo to dry on the vehicle. Dry the vehicle with a waffle weave microfiber towel to prevent water spots.

32 oz.

BLACKFIRE Car Wash cleans your vehicle and renews the shine every time you wash your car. BLACKFIRE Car Wash tri-polymers replenish and reinforce existing paint protection. Incredible Tuff Suds II technology creates mountains of suds to help float away grime and dirt, without scratching the finish. Drying agents help reduce water spotting and make drying easier. BLACKFIRE Car Wash helps your vehicle look just waxed after every wash!

Directions:

Work out of direct sunlight when washing with BLACKFIRE Car Wash. Dilute 1 ounce of shampoo in 3 gallons of water. Activate foam with a jet of water. Use a clean wash mitt or sponge to wash the vehicle, starting at the top. Rinse frequently. Do not allow shampoo to dry on the vehicle. Dry the vehicle with a waffle weave microfiber towel to prevent water spots.

5 gal. jug

Directions:

Work out of direct sunlight when washing with BLACKFIRE Car Wash. Dilute 1 ounce of shampoo in 3 gallons of water. Activate foam with a jet of water. Use a clean wash mitt or sponge to wash the vehicle, starting at the top. Rinse frequently. Do not allow shampoo to dry on the vehicle. Dry the vehicle with a waffle weave microfiber towel to prevent water spots.

32 oz.

Spray on and buff off to create a brilliant shine

Spray on and buff off to create a brilliant shine

Spray on and buff off to create a brilliant shine

5 Gallons (640 oz.)

Spray on and buff off to create a brilliant shine

5 Gallon (640 oz.)

Directions:

Mist a small area (2 sq. ft.) of the vehicle and rub the clay bar over the surface. The clay will "grab" at first. Continue lightly rubbing the clay over the surface until it moves freely. When the bar moves freely, the surface is clean. Wipe off any residues with a towel and proceed to the next area.

32 oz.

Directions:

Mist a small area (2 sq. ft.) of the vehicle and rub the clay bar over the surface. The clay will "grab" at first. Continue lightly rubbing the clay over the surface until it moves freely. When the bar moves freely, the surface is clean. Wipe off any residues with a towel and proceed to the next area.

128 oz.

Directions:

Mist a small area (2 sq. ft.) of the vehicle and rub the clay bar over the surface. The clay will "grab" at first. Continue lightly rubbing the clay over the surface until it moves freely. When the bar moves freely, the surface is clean. Wipe off any residues with a towel and proceed to the next area.

32 oz.

Use BLACKFIRE Clay Lubricant to allow your BLACKFIRE Clay Mitt to move freely across the surface to remove embedded paint contaminants.

BLACKFIRE Coating Booster will enhance your coating’s natural water sheeting and beading qualities while boosting the protection and durability.

• Ensure the surface is clean and cool to the touch.
• Spray BLACKFIRE Coating Booster directly onto the surface and spread over the surface using a soft microfiber towel or applicator.
• Wipe surface until product disappears.
• Flip to a clean side of your towel and buff off excess residue. Continue around the entirety of the vehicle.
• Can be used on all coated surfaces including paint, wheels, and glass.

BLACKFIRE Coating Booster will enhance your coating’s natural water sheeting and beading qualities while boosting the protection and durability.

• Ensure the surface is clean and cool to the touch.
• Spray BLACKFIRE Coating Booster directly onto the surface and spread over the surface using a soft microfiber towel or applicator.
• Wipe surface until product disappears.
• Flip to a clean side of your towel and buff off excess residue. Continue around the entirety of the vehicle.
• Can be used on all coated surfaces including paint, wheels, and glass.

BLACKFIRE Coating Booster will enhance your coating’s natural water sheeting and beading qualities while boosting the protection and durability.

• Ensure the surface is clean and cool to the touch.
• Spray BLACKFIRE Coating Booster directly onto the surface and spread over the surface using a soft microfiber towel or applicator.
• Wipe surface until product disappears.
• Flip to a clean side of your towel and buff off excess residue. Continue around the entirety of the vehicle.
• Can be used on all coated surfaces including paint, wheels, and glass.

BLACKFIRE Coating Booster will enhance your coating’s natural water sheeting and beading qualities while boosting the protection and durability.

• Ensure the surface is clean and cool to the touch.
• Spray BLACKFIRE Coating Booster directly onto the surface and spread over the surface using a soft microfiber towel or applicator.
• Wipe surface until product disappears.
• Flip to a clean side of your towel and buff off excess residue. Continue around the entirety of the vehicle.
• Can be used on all coated surfaces including paint, wheels, and glass.

Federal regulations prohibit the shipment of aerosol products by air. This item is shipped by UPS Ground only.

Federal regulations prohibit the shipment of aerosol products by air. This item is shipped by UPS Ground only.

Federal regulations prohibit the shipment of aerosol products by air. This item is shipped by UPS Ground only.

Use BLACKFIRE and create “whiplash” with the perfect pair!

When BLACKFIRE Duo Kit is used your vehicle will have a rich shine that shimmers with energy. BLACKFIRE Compound and Polish remove swirls and oxidation while improving the paint’s gloss and depth. Once wax is applied over this corrected finish, it shimmers! Use the BLACKFIRE Duo with a random orbital or rotary/circular polisher.

BLACKFIRE formulas are the result of over twenty years of research with state-of-the-art polymers from Germany, Sweden and the US. All BLACKFIRE products are surface-friendly and VOC compliant in all 50 states. These water-based formulas clean, condition, polish and protect without the strong solvents found in most car care products.

The BLACKFIRE Duo includes:

BLACKFIRE Compound
BLACKFIRE Compound was designed to remove deeper (1200 - 2000 grit) swirls, scratches and defects in ceramic particle and scratch-resistant clear coats. Compound is designed for machine application with either a dual-action or circular machine polisher. Most 2000 grit and deeper swirls, scratches, spots and defects in ceramic particle and scratch-resistant clear coats cannot be removed by hand.

For best results, apply BLACKFIRE Compound using a CCS Orange Light Cutting Pad. These pads are used at the OEM level on ceramic particle and scratch-resistant clear coats.

BLACKFIRE SRC Clear Compound can be use on all newer technology, scratch-resistant clear coats. If your vehicle does have a scratch resistant or nano, ceramic particle clear coat, always use BLACKFIRE SRC Finishing Polish first to try and remove the defect. SRC Compound should only be used to remove deeper scratches and paint defects that SRC Finishing Polish could not remove.

After compounding, the surface may have a dull, hazy finish. This is called compounding haze and is a normal byproduct of compounding. After compounding, make sure to use BLACKFIRE SRC Finishing Polish with a clean, polishing pad to remove compounding haze and restore surface gloss.

BLACKFIRE SRC Finishing Polish
In 2005, Mercedes Benz started using a nano, ceramic particle, clear coat and in 2006 domestic automakers started using a super-hard, scratch-resistant clear coat developed by both PPG and BASF. These new clear coats are scratch-resistant, not scratch proof. They can still be scratched and spotted. The problem is polishing, or removing defects, in these new, super-hard clear coats. Conventional polishes may not have the cutting power to remove swirls, spots and defects in these new coatings.

SRC Polish will remove any existing wax or sealant and burnish the finish to a mirror-like shine. Applied by machine, it will remove 2500 grit swirls, spots and scratches without hazing the finish. We now whole heartedly recommend BLACKFIRE Polish for use on all clear coat finishes.

To stay on top of paint innovations, BLACKFIRE incorporated cutting edge German abrasives to develop a compound and polish to remove defects in the new clear coats. This new breed of polishes is currently used at the OEM level in various auto manufacturing plants worldwide and they are considered within the polishing industry to be the most advanced polishes in the world.

Using BLACKFIRE Compound and BLACKFIRE Polish, Mike Phillips was able to completely remove the swirls and paint imperfections and polish to perfection the paint on this 1994 Z28 Camaro.

Your first step to creating perfection on all paint finishes!

BLACKFIRE Compound was developed using the latest German technology for OEM applications. It removes up to 1,000 grit sanding scratches on fresh paint and an impressive range of imperfections from cured paint finishes. Application is user-friendly with a dual-action orbital or rotary polisher. BLACKFIRE Compound is the first step in creating a head-turning shine!

When used with an Orange Light Cutting Pad, swirl marks and other imperfections are removed with ease!

This is a companion product to BLACKFIRE Polish designed to remove deeper swirls, scratches and defects in ceramic particle and scratch-resistant clear coats. This is the same abrasive technology used at the OEM level by German and domestic automakers. Use BLACKFIRE Compound on paint flaws that cannot be removed with BLACKFIRE Polish.

BLACKFIRE Compound is designed for machine application with either a dual action or rotary/circular machine polisher. Most 2,000 grit and deeper swirls, scratches, spots and defects in ceramic particle and scratch-resistant clear coats cannot be removed by hand. BLACKFIRE Compound provides the muscle needed to level imperfections in all types of paint.

For the best results, apply BLACKFIRE Compound with a dual action polisher using a CCS Orange Light Cutting Pad. These orange pads are used at the OEM level on ceramic particle and scratch-resistant clear coats.

BLACKFIRE Compound is designed to remove imperfections from the paint without dulling the surface or creating compounding haze. After compounding, use BLACKFIRE Polish with a clean polishing pad to further enhance surface gloss.

Flawless paint starts with BLACKFIRE Compound!

128 oz.

Your first step to creating perfection on all paint finishes!

BLACKFIRE Compound was developed using the latest German technology for OEM applications. It removes up to 1,000 grit sanding scratches on fresh paint and an impressive range of imperfections from cured paint finishes. Application is user-friendly with a dual-action orbital or rotary polisher. BLACKFIRE Compound is the first step in creating a head-turning shine!

When used with an Orange Light Cutting Pad, swirl marks and other imperfections are removed with ease!

This is a companion product to BLACKFIRE Polish designed to remove deeper swirls, scratches and defects in ceramic particle and scratch-resistant clear coats. This is the same abrasive technology used at the OEM level by German and domestic automakers. Use BLACKFIRE Compound on paint flaws that cannot be removed with BLACKFIRE Polish.

BLACKFIRE Compound is designed for machine application with either a dual action or rotary/circular machine polisher. Most 2,000 grit and deeper swirls, scratches, spots and defects in ceramic particle and scratch-resistant clear coats cannot be removed by hand. BLACKFIRE Compound provides the muscle needed to level imperfections in all types of paint.

For the best results, apply BLACKFIRE Compound with a dual action polisher using a CCS Orange Light Cutting Pad. These orange pads are used at the OEM level on ceramic particle and scratch-resistant clear coats.

BLACKFIRE Compound is designed to remove imperfections from the paint without dulling the surface or creating compounding haze. After compounding, use BLACKFIRE Polish with a clean polishing pad to further enhance surface gloss.

Flawless paint starts with BLACKFIRE Compound!

32 oz.

Your first step to creating perfection on all paint finishes!

BLACKFIRE Compound was developed using the latest German technology for OEM applications. It removes up to 1,000 grit sanding scratches on fresh paint and an impressive range of imperfections from cured paint finishes. Application is user-friendly with a dual-action orbital or rotary polisher. BLACKFIRE Compound is the first step in creating a head-turning shine!

This is a companion product to BLACKFIRE Polish designed to remove deeper swirls, scratches and defects in ceramic particle and scratch-resistant clear coats. This is the same abrasive technology used at the OEM level by German and domestic automakers. Use BLACKFIRE Compound on paint flaws that cannot be removed with BLACKFIRE Polish.

BLACKFIRE Compound is designed for machine application with either a dual action or rotary/circular machine polisher. Most 2,000 grit and deeper swirls, scratches, spots and defects in ceramic particle and scratch-resistant clear coats cannot be removed by hand. BLACKFIRE Compound provides the muscle needed to level imperfections in all types of paint.

For the best results, apply BLACKFIRE Compound with a dual action polisher using a CCS Orange Light Cutting Pad. These orange pads are used at the OEM level on ceramic particle and scratch-resistant clear coats.

When used with an Orange Light Cutting Pad, swirl marks and other imperfections are removed with ease!

Flawless paint starts with BLACKFIRE Compound!

Mike Phillips used BLACKFIRE Compound to quickly remove the swirls and scratches in this 1994 Z28 Camaro. Even with the amount of paint imperfections in the paint, you can see how well the BLACKFIRE Compound finished - it almost doesn't even need the BLACKFIRE Polish!

8 oz.

Your first step to creating perfection on all paint finishes!

BLACKFIRE Compound was developed using the latest German technology for OEM applications. It removes up to 1,000 grit sanding scratches on fresh paint and an impressive range of imperfections from cured paint finishes. Application is user-friendly with a dual-action orbital or rotary polisher. BLACKFIRE Compound is the first step in creating a head-turning shine!

When used with an Orange Light Cutting Pad, swirl marks and other imperfections are removed with ease!

This is a companion product to BLACKFIRE Polish designed to remove deeper swirls, scratches and defects in ceramic particle and scratch-resistant clear coats. This is the same abrasive technology used at the OEM level by German and domestic automakers. Use BLACKFIRE Compound on paint flaws that cannot be removed with BLACKFIRE Polish.

BLACKFIRE Compound is designed for machine application with either a dual action or rotary/circular machine polisher. Most 2,000 grit and deeper swirls, scratches, spots and defects in ceramic particle and scratch-resistant clear coats cannot be removed by hand. BLACKFIRE Compound provides the muscle needed to level imperfections in all types of paint.

For the best results, apply BLACKFIRE Compound with a dual action polisher using a CCS Orange Light Cutting Pad. These orange pads are used at the OEM level on ceramic particle and scratch-resistant clear coats.

BLACKFIRE Compound is designed to remove imperfections from the paint without dulling the surface or creating compounding haze. After compounding, use BLACKFIRE Polish with a clean polishing pad to further enhance surface gloss.

Flawless paint starts with BLACKFIRE Compound!

32 oz.

A total retail value of $115.92. Save $40.93! "|"Blackfire Daily Driver Wheel & Tire Kit "|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-metal-polishing-kit|BF-530-DMPK|CUSTOM-ITEM|"BLACKFIRE Drill Metal Polishing Kit"|"https://www.blackfirewax.com/blackfire-metal-polishing-kit.html"|(61.95)|(39.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|" Shine bright like a metallic wheel!

When your wheels need that extra notch of polishing, the BLACKFIRE Drill Metal Polishing kit has your back. The BLACKFIRE Metal Polish is your one-stop-shop for polishing perfection. Getting rid of oxidization, rust, corrosion and fine scratches is what BLACKFIRE Metal Polish does best. This kit comes with two options for applicators. The 3” Lake Country Wool Ball Polishing Ball polishes spots on your wheel that flat pads can’t reach. As soft as this polishing ball may be, it still cuts through oxidation and discolorations on a multitude of surfaces. The Microfiber Applicator Pad is as soft as luscious hair, nonabrasive and safe to us on the delicate surfaces. No matter which applicator you use (try both!), wipe your wheels clean with an All Purpose Microfiber Towel. Don’t be deceived by the softness of these towels, they are tough as nails on dirt and grime lingering on your wheels. Who knew wheels could look so good?

Items in this kit:

BLACKFIRE Metal Polish
After detailing your car to near perfection, all that’s left is to shine up the metal portions. BLACKFIRE Metal Polish restores metal to its original finish and leaves the area haze free. Oxygen is impossible to resist, but with the BLACKFIRE Metal Polish, you can quickly remove the lingering effects of oxidization. Rust, corrosion, fine scratches and other defects are no match for the BLACKFIRE Metal Polish, which is safe to use on aluminum, chrome and stainless-steel finishes. This product is easy to use and leaves your metal surfaces shining with brilliance.

Lake Country Wool-Ball Polishing Ball
The Lake Country Wool-Ball goes where wool pads can’t! The round wool polishing ball polishes between spokes and in concave spaces where flat wool pads just can’t reach. Cut through oxidation and discoloration on metals, painted surfaces, fiberglass, gel coats, and composites with the Lake Country Wool-Ball!

Microfiber Applicator Pad
With over 200,000 strands of advanced microfibers per square inch, nothing matches its ability to remove dirt, residues, and surface oxidation. An 80/20 polyester/polyamide blend of “split” weave fibers, 100 times finer than a human hair, ensure smooth and even wax distribution. This advanced microfiber fabric is a lint free material. Microfiber Applicator Pads are angel hair soft, and completely non-abrasive, so they are safe to use on even the most delicate surfaces.

Grey All Purpose Microfiber Towels
Pick up All Purpose Microfiber Towels in all the available colors to color-code your detailing towels for different detailing jobs! This will prevent cross-contamination and give you a huge supply of quality microfiber!

Kit includes
1 x 16 oz. BLACKFIRE Metal Polish
1 x 3” Lake Country Wool-Ball Polishing Ball
2 x 4” x 3” Microfiber Applicator Pad
3 x 16” x 16” Grey All Purpose Microfiber Towels

A total retail value of $50.95. Save $10.96! "|"BLACKFIRE Drill Metal Polishing Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-engine-degreaser|BF-705|CUSTOM-ITEM|"BLACKFIRE Engine Degreaser"|"https://www.blackfirewax.com/blackfire-engine-degreaser.html"|(24.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"Eliminates the tough to remove grime that builds up on your engine!

Blackfire Engine Degreaser will make cleaning that tough grime, oil, and dirt from your engine bay easier than it has ever been before. You won’t have to worry about accidental overspray getting on the sensitive area surrounding your engine bay when you are using Blackfire Engine Degreaser. Thanks to the gentle and natural cleaners that are in Blackfire Engine Degreaser’s formula will not cause any damage to the plastic or vinyl surface neat your engine bay. There is no accurate measuring needed to dilute Blackfire Engine Degreaser, this product comes ready to use straight from the bottle.

The main focus of pretty much every professional detailer or even the detailing hobbyist is the paint. People will take hours out of their day at a time to make sure that every inch of their paint is picture perfect and completely immaculate. While their time is certainly not wasted on their extremely important paint, they will tend to completely overlook an equally important aspect of detailing, the engine. Yes, the engine of your car needs just as much love and attention as the paint, wheels, and glass do. However, properly cleaning your engine can be a difficult and daunting task. The engine is home to the most tough to clean stains, grease, and grime. Finding a cleaner that is capable of tackling those notorious build-ups can be as tough of a task as actually cleaning them. Blackfire Engine Degreaser is an extremely effective engine cleaner that uses specially designed cleaner agents that are capable of breaking up the bond between the grime that builds up in your engine. Once the grip those materials hold on your engine is broken, they can be easily removed with some light abrasion.

There are many surfaces in and around your engine area. The harsh chemicals used in many degreasers on the market today would wreak havoc on those surfaces, leaving them pitted and tarnished. No matter how hard you try to prevent the degreaser from getting on those surfaces, overspray is inevitable and unavoidable. The only wat around this issue would be to use a degreaser that is not as harsh and caustic. Blackfire Engine Degreaser is formulated using cleaner agents that target the grime build-up and effectively eliminate them while simultaneously leaving the delicate surfaces unblemished.

The majority of cleaners on the market today require some amount of dilution before the can be used. This means that you have to carefully measure out the exact amount of product you need and then adding the perfect amount of water. The whole process can be very time consuming and quite an inconvenience. Blackfire Engine Degreaser comes ready to use in a convenient spray bottle, so you’ll never have to worry about measuring out amounts to dilute your degreaser again.

Directions:
Make sure to cover areas that cannot be exposed to moisture. Also ensure that the engine is cool to the touch prior to application. Mist the surface with water first. Spray Blackfire Engine Degreaser onto the surface you are treating and allow it to soak for roughly 3-5 minutes. Agitate the surface with a soft bristled brush if necessary. Rinse the remaining product off using a fine mist of water. "|"BLACKFIRE Engine Degreaser"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-705-duo|BF-705-128-P|CUSTOM-ITEM|"BLACKFIRE Engine Degreaser Duo Pack"|"https://www.blackfirewax.com/bf-705-duo.html"|(82.98)|(57.99)||""|""|""|""|""|"Eliminates the tough to remove grime that builds up on your engine!

Blackfire Engine Degreaser will make cleaning that tough grime, oil, and dirt from your engine bay easier than it has ever been before. You won’t have to worry about accidental overspray getting on the sensitive area surrounding your engine bay when you are using Blackfire Engine Degreaser. Thanks to the gentle and natural cleaners that are in Blackfire Engine Degreaser’s formula will not cause any damage to the plastic or vinyl surface neat your engine bay. There is no accurate measuring needed to dilute Blackfire Engine Degreaser, this product comes ready to use straight from the bottle.

The main focus of pretty much every professional detailer or even the detailing hobbyist is the paint. People will take hours out of their day at a time to make sure that every inch of their paint is picture perfect and completely immaculate. While their time is certainly not wasted on their extremely important paint, they will tend to completely overlook an equally important aspect of detailing, the engine. Yes, the engine of your car needs just as much love and attention as the paint, wheels, and glass do. However, properly cleaning your engine can be a difficult and daunting task. The engine is home to the most tough to clean stains, grease, and grime. Finding a cleaner that is capable of tackling those notorious build-ups can be as tough of a task as actually cleaning them. Blackfire Engine Degreaser is an extremely effective engine cleaner that uses specially designed cleaner agents that are capable of breaking up the bond between the grime that builds up in your engine. Once the grip those materials hold on your engine is broken, they can be easily removed with some light abrasion.

There are many surfaces in and around your engine area. The harsh chemicals used in many degreasers on the market today would wreak havoc on those surfaces, leaving them pitted and tarnished. No matter how hard you try to prevent the degreaser from getting on those surfaces, overspray is inevitable and unavoidable. The only wat around this issue would be to use a degreaser that is not as harsh and caustic. Blackfire Engine Degreaser is formulated using cleaner agents that target the grime build-up and effectively eliminate them while simultaneously leaving the delicate surfaces unblemished.

The majority of cleaners on the market today require some amount of dilution before the can be used. This means that you have to carefully measure out the exact amount of product you need and then adding the perfect amount of water. The whole process can be very time consuming and quite an inconvenience. Blackfire Engine Degreaser comes ready to use in a convenient spray bottle, so you’ll never have to worry about measuring out amounts to dilute your degreaser again.

Directions:
Make sure to cover areas that cannot be exposed to moisture. Also ensure that the engine is cool to the touch prior to application. Mist the surface with water first. Spray Blackfire Engine Degreaser onto the surface you are treating and allow it to soak for roughly 3-5 minutes. Agitate the surface with a soft bristled brush if necessary. Rinse the remaining product off using a fine mist of water. Discontinued."|"BLACKFIRE Engine Degreaser Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-enzyme-cleaner|BF-170|CUSTOM-ITEM|"BLACKFIRE Enzyme Cleaner"|"https://www.blackfirewax.com/blackfire-enzyme-cleaner.html"|(22.99)||T|""|""|""|""|""|"High-powered cleaning ability against interior stains!

BLACKFIRE Enzyme Cleaner brings you an intense cleaner that digs deep to remove set in stains and lingering odors caused by a multitude of contaminants. With its unique enzyme activated formula, BLACKFIRE Enzyme Cleaner will eliminate stains and odors at the source. BLACKFIRE Enzyme Cleaner is naturally derived, non-toxic and biodegradable, making it safe for you and your surfaces. BLACKFIRE Enzyme cleaner is highly concentrated with dilution ratios making a little go a long way.

---

---

Our car interiors can take a lot of hits and therefore, can be a lot of work. No matter what life throws at you, whether its mud or dirt or even a little blood… BLACKFIRE Enzyme Cleaner works hard to remove those contaminants so your car can look its best.

Cleaning and deodorizing your fabric and upholstered surfaces have never been so simple, and so powerful, when using BLACKFIRE Enzyme Cleaner. BLACKFIRE Enzyme Cleaner gets those hard-to- reach stains that are caused by a variety of contaminants. Contaminants such as coffee, grease, oil, wine and other environmental contaminants, as well as the slightly uncomfortable contaminants like vomit, blood, feces and urine. The unique enzyme activated formula uses advanced technology to break down these contaminants, similar to the metabolism in people. So, no matter what stains you may have, BLACKFIRE Enzyme Cleaner is your one stop shop for stain removal.

With great stains, comes great odors. BLACKFIRE Enzyme Cleaner not only rids your car of the way the stain looks, but also the way the stain smells. Just because the wine or coffee, or even the urine, stain is gone, it does not mean that the smell always goes away with. But with BLACKFIRE Enzyme Cleaner, the odor will be eliminated for a neutral smelling car, free of any unpleasant odors.

---

BLACKFIRE Enzyme Cleaner is capable of handling even heavily soiled carpet and upholstery with ease!		Start by spraying a liberal amount of BLACKFIRE Enzyme Cleaner directly onto the surface you are cleaning.
After giving BLACKFIRE Enzyme Cleaner 10-30 minutes to dwel (depending on soil level), blot the stain with a clean microfiber towel and wipe away any excess.		You won't be able to believe your soiled fabric could ever be so clean!

---

The enzyme in BLACKFIRE Enzyme Cleaner means that the natural enzymes don’t need to use any additional or harmful chemicals to effectively clean your fabric and upholstery. This formula is non-toxic and biodegradable, allowing you to work safely and comfortably, knowing harm won’t come to you or your surfaces from this product. This product is highly concentrated and can be diluted to last longer. Plus, BLACKFIRE Enzyme Cleaner is easy-to-use! After testing on an inconspicuous area, spray the area to be cleaned, allow to dwell for 10-30 minutes, gently rub the stain, blot away excess product and let it air dry.

DIRECTIONS:

-Dilute BLACKFIRE Enzyme Cleaner 1:8 (product:water)

      • For ease of diluting, you can add 2 oz. of BLACKFIRE Enzyme Cleaner (16 oz. if making a gallon of product)
        to a 16 oz. bottle and fill with water.
-Test an inconspicuous area of fabric for colorfastness.
-Liberally spray the area to be cleaned and allow to dwell.
-Depending on level of contamination, dwell time can be 10-30 minutes.
-If surface is heavily soiled, use a soft bristled brush to agitate surface.
-Using a clean microfiber towel, gently rub the stain.
-Blot excess product away using a clean, dry microfiber towel.
-Allow to fully air dry

*PRO TIP: For EXTREMELY soiled areas, use BLACKFIRE Enzyme Cleaner undiluted and cover with a towel after application to slow evaporation. Clean fabric using BLACKFIRE Carpet and Upholstery Cleaner afterwards.*

*Make sure to only use BLACKFIRE Enzyme Cleaner between 45°F and 105°F and a pH range of 6-9.*

32 oz. "|"BLACKFIRE Enzyme Cleaner"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-expert-detailer-kit|RU-BF-EXP-KIT|CUSTOM-ITEM|"Blackfire Expert Detailer Kit"|"https://www.blackfirewax.com/bf-expert-detailer-kit.html"|(1364.82)|(1160.99)|T|""|""|""|""|""|"Expert level products for expert level detailers!

If you’re not new to the world of detailing, then you know not only are high quality products key, but so are a large quantity of towels and pads. This kit comes with 30 Storm Gray Microfiber Polishing cloths for scratch-less polishing and 3 Cobra Supreme Guzzler Waffle Weave Drying Towels for maximum absorption. It also comes with two 10 packs of BLACKFIRE Micro-Suede Cloths for applying ceramic coatings. In better apply a ceramic coating, it also comes with a BLACKFIRE Coating Applicator. As far as pads go, this kit comes with the 8 of the Rupes 6” Green Medium Foam Pad, Rupes 6” Yellow Polishing Foam Pad and the Rupes 6” White Finishing Foam Pad. The green pads are aggressive and meant for correcting paint imperfections, while the yellow pads are meant to correct light paint imperfections and the white are meant to be used with high quality polishes. The BLACKFIRE Clay Mitt is great for getting contaminants off your paint, using the clay side of the mitt (along with a clay lubricant). The BLACKFIRE Pressure Washer Foam Cannon HP Kit gives your car a “touch-free"" wash with this high-powered foam gun. BLACKFIRE Pro Ceramic Coating most abrasion and corrosion resistant, guaranteed to give your car a mirror like shine. For the perfect product to use prior to your favorite ceramic coating to ensure that the light swirls and scratches are filled in and the surface is properly prepped, use the BLACKFIRE Pro Primer Polish. BLACKFIRE Polish uses fine abrasives to cure minor imperfections and bring the car’s paint to a brilliant shine. BLACKFIRE Compound fixes minor imperfections using a 1,000 grit sanding. BLACKFIRE Foam Soap should be used at the beginning of your detailing process as it gives your car a soapy wash down, allowing dirt and debris to be washed away. BLACKFIRE Iron Remover turns purple as it washes off your car, exemplifying the contaminants that have been removed. And dinally, the Rupes BigFoot LHR15 Mark III Random Orbital Polisher brings all this products and tools together. This polisher has improved ergonomic, an electronic speed control dial, a progressive trigger, and an efficient motor, making it one of the most sought after polishers on the market.

Items in this kit:

Rupes BigFoot LHR15 Mark III Random Orbital Polisher

The RUPES BigFoot polishers have been widely known and respected as some of the best and most versatile polishers ever since they first hit the market with the 15ES and 21ES. Since then, RUPES has been working tirelessly to innovate and improve the car polisher in new and inventive ways. The introduction of the Mark II variants created quite a stir and really solidified the RUPES name in the world of detailing tools, polishes, and pads. To anyone who was already privy to all of the years of RUPES innovation, it should come as no surprise that RUPES has done it YET AGAIN!

BLACKFIRE Iron Remover

BLACKFIRE Iron Remover is an easy-to-use, chemical paint decontamination product designed to remove large amount of iron and industrial fallout from your painted surfaces and wheels. The color-changing formula indicates proper application as the product changes from clear to purple as paint contaminants are removed! Paint decontamination is needed on even the newest cars; you can’t achieve a proper shine and finish without it! BLACKFIRE Iron Remover means less hard work for you, and a quicker detail time overall!

BLACKFIRE Foam Soap

BLACKFIRE Foam Soap is a highly concentrated foaming shampoo formula that will create a mountain of suds for the ultimate car wash! Formulated using extreme lubricity agents, BLACKFIRE Foam Soap creates the perfect amount of tension on your car’s surface, allowing dirt and debris to be removed without harming your paint. BLACKFIRE Foam Soap can be used alone in your car wash bucket, but for extreme results, use with your favorite foam gun or foam cannon. Washing your car has never been more fun!

BLACKFIRE Compound

BLACKFIRE Compound was developed using the latest German technology for OEM applications. It removes up to 1,000 grit sanding scratches on fresh paint and an impressive range of imperfections from cured paint finishes. Application is user-friendly with a dual-action orbital or rotary polisher. BLACKFIRE Compound is the first step in creating a head-turning shine!

BLACKFIRE Polish

BLACKFIRE Polish uses nano-abrasives to remove 2500-3000 grit sanding marks on fresh paints and to correct mild imperfections on cured paints. These fine abrasives burnish the finish to an incredible gloss! BLACKFIRE Polish can be used to refine the paint after compounding or as a one-step shine enhancing polish.

BLACKFIRE Pro Primer Polish

BLACKFIRE Pro Primer Polish is the perfect product to use prior to your favorite ceramic coating to ensure that the light swirls and scratches are filled in and the surface is properly prepped. BLACKFIRE Pro Primer Polish contains Silica technology that will create a stronger bond with any ceramic coating applied to your paint surface, greatly increasing the strength and duration of your coating. By combining the two most time-consuming steps of applying a paint coating, BLACKFIRE Pro Primer Polish allows you to cut your detailing time in half. BLACKFIRE Pro Primer Polish can even be used as a stand-alone product to correct minor imperfections and leave a protective barrier behind.

BLACKFIRE Pro Ceramic Coating

BLACKFIRE Pro Ceramic Coating bridges the gap between entry level commercial ceramic coatings and professional-only industrial ceramic coatings, allowing everyone to achieve an extraordinary mirror-like shine! BLACKFIRE Pro Ceramic Coating was designed using a solvent and fluorine free formula to maximize its user-safety and ensure that it can be applied anywhere. The thermoplastic component contained in the formula for BLACKFIRE Pro Ceramic Coating creates a flexible, cross-linked matrix that provides 9H+ hardness that is graded to last up to 2 years when properly maintained. The incredible structural integrity of this matrix makes BLACKFIRE Pro Ceramic Coating one of the most abrasion and corrosion resistant ceramic coatings on the market today!

BLACKFIRE Pressure Washer Foam Cannon HP Kit

Cover your vehicle in a flurry of foam quickly with the Foam Cannon HP! This foam lance works with a pressure washer to produce a thick, clinging foam. Give your vehicle a ""touch-free"" wash with this high powered foam gun. The Foam Cannon HP will blow you away! The kit includes a solid brass male nipple and a common pressure washer fitting.

BLACKFIRE Clay Mitt

BLACKFIRE Clay Mitt is a specialized wash mitt that uses an advanced rubberized material to safely remove embedded contaminants in your paint. This synthetic coating works the way a traditional clay bar does, but with a lot less mess! BLACKFIRE Clay Mitt will safely remove over-spray, road grime, dirt, industrial fall-out, tree sap and more with just one pass! Engineered as a two-in-one tool, the BLACKFIRE Clay Mitt works as both a wash mitt AND a method of decontamination!

Rupes 150 MM (6”) Green Medium Foam Pad

This pad is the second step in the Rupes Big Foot Polishing System. The Green Medium Foam Pad is very dense in its construction and was designed to be used with Rupes Quarz Gloss Medium Gel Compound to remove swirl marks, water spots and other paint imperfections. This pad is aggressive enough for most applications on factory clear coat systems. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.

8 Rupes 150 MM (6”) Yellow Polishing Foam Pad

This pad is the third step in the Rupes Big Foot Polishing System. The Yellow Polishing Foam Pad was designed to be used with Rupes Keramik Gloss Fine Gel Polish to remove light swirl marks, holograms, clay-induced marring, and other light paint imperfections. This pad finishes exceptionally well considering the mechanical polishing ability that it provides.

8 Rupes 150 MM (6”) White Finishing Foam Pad

This pad is the fourth and final step in the Rupes Big Foot Polishing System. The White Finishing Foam Pad is exceptionally soft in its construction and was designed to be used with Rupes Diamond Ultra Fine Gel Polish to maximize gloss and clarity before applying a wax or sealant. The White Finishing Foam Pad will finish flawlessly on any paint system when used with a high quality polish.

BLACKFIRE Coating Applicator

BLACKFIRE Coating Applicator was optimally designed for the perfection application of BLACKFIRE Pro Ceramic Coating. Constructed using a thick polyurethane handle for enhanced grip on top, and a soft, open cell foam on the bottom, the BLACKFIRE Coating Applicator promotes an even application of product and provides a strong base when wrapped in a BLACKFIRE MicroSuede Cloth. The application of paint coatings can be tricky enough sometimes, don’t hamper your results with sub-par tools – pick up the BLACKFIRE Coating Applicator today and achieve the best coating results you can!

BLACKFIRE Micro-suede Cloths

BLACKFIRE MicroSuede Cloths, using specially designed flat weave, are the perfect construction for applying ceramic coatings. BLACKFIRE MicroSuede Cloths is no-linting and will not leave debris on surfaces while coating. These ultra-soft towels will not mar the surface, leaving behind only a perfectly applied layer of BLACKFIRE Pro Ceramic Coating.

Cobra Supreme Guzzler Waffle Weave Drying Towel

The Supreme Guzzler is 20% thicker than the original towel to give it an even greater capacity for moisture. At approximately 5.5 square feet, this waffle weave towel can dry most small cars without being rung out once! As you may well know, microfiber is made of two synthetic fibers: polyester and polyamide. Polyester accounts for the towel's durability and polishing properties while polyamide is silky soft. The plush 80/20 weave of the two fibers allow the towel to hold a tremendous amount of water; seven times its own weight!

Storm Gray Edgeless Microfiber Polishing Cloth

The Storm Gray Edgeless Microfiber Polishing Cloth is woven specifically for wax and polish removal. It has a soft touch that is extra gentle on sensitive clear coat finishes. Plus, the cloth has no edges, making accidental scratches virtually impossible. Use this cloth the next time you wax your vehicle and I promise you’ll never use anything else!

Kit includes

Rupes BigFoot LHR15 Mark III Random Orbital Polisher
1 32 oz. BLACKFIRE Iron Remover
1 32 oz. BLACKFIRE Foam Soap
1 32 oz. BLACKFIRE Compound
1 32 oz. BLACKFIRE Polish
1 32 oz. BLACKFIRE Pro Primer Polish
1 50 ml. BLACKFIRE Pro Ceramic Coating
1 BLACKFIRE Pressure Washer Foam Cannon HP Kit
1 BLACKFIRE Clay Mitt
8 Rupes 150 MM (6”) Green Medium Foam Pad
8 Rupes 150 MM (6”) Yellow Polishing Foam Pad
8 Rupes 150 MM (6”) White Finishing Foam Pad
1 BLACKFIRE Coating Applicator
2 (10 Pack) 12 10 cm. BLACKFIRE Micro-suede Cloths
30 16” x 16” Storm Gray Microfiber Polishing Cloth
3 20” x 40” Cobra Supreme Guzzler Waffle Weave Drying Towel

A total retail value of $1,372.32. Save $272.33! "|"Blackfire Expert Detailer Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-fabric-protectant-cleaner-kit|BF-440310K|CUSTOM-ITEM|"BLACKFIRE Fabric Protectant & Cleaner Kit"|"https://www.blackfirewax.com/bf-fabric-protectant-cleaner-kit.html"|(67.96)|(49.99)|T|""|""|""|""|""|"Clean and protect your carpets with this handy kit!

Keep your carpets clean and protected with the BLACKFIRE Fabric Protectant & Cleaner Kit! With the BLACKFIRE Fabric Protectant & Cleaner Kit you have everything you need from start to finish to ensure that your carpets will have contaminants, stains, and other dirt removed and then protected against future spills! Your carpet and fabric won't suffer with the BLACKFIRE Fabric Protectant & Cleaner Kit!

BLACKFIRE Fabric Protectant
BLACKFIRE Fabric Protectant makes caring for your cars carpet or fabric interior nearly effortless. By applying an ultra-hydrophobic layer of protection to the surface, BLACKFIRE Fabric Protectant will prevent any moisture from being absorbed by your carpet and upholstery. Whether you spill your morning cup of coffee, forget to bring a towel with you on your beach trip, or get caught in a rainstorm on your way to the car, BLACKFIRE Fabric Protectant will make sure your fabric doesn’t suffer the consequences!

BLACKFIRE Carpet & Upholstery Cleaner
BLACKFIRE Carpet & Upholstery Cleaner will allow you to quickly and effectively remove stains, mud, grime, dirt, and other unsightly contaminants from carpet and upholstery. BLACKFIRE Carpet & Upholstery Cleaner will go to work within seconds of contact allowing you to expedite the detailing process. BLACKFIRE Carpet & Upholstery Cleaner will not stain or degrade the carpet fibers while it is removing difficult debris. BLACKFIRE Carpet & Upholstery Cleaner will work effectively on any type of non-suede carpet or upholstery you come across.

Mat & Carpet Scrub Brush
More than your standard issue scrub brush, this one is a powerhouse against inevitable spills and ground in dirt underfoot because of its superior quality. Your carpets and mats are one of the most visible, yet hardest to maintain parts of the car. The right tool, with the right product will help you keep your mats and carpet looking their best.

Yellow All-Purpose Microfiber Towels - 3 Pack
All-Purpose Towels are superior to terry cloth in softness, durability, and absorbency. These are safe on any surface.

Kit Includes:
BLACKFIRE Fabric Protectant 32 oz.
BLACKFIRE Carpet & Upholstery Cleaner 32 oz.
Mat & Carpet Scrub Brush
(3) Yellow All-Purpose Microfiber Towels

A savings of $17.97!"|"BLACKFIRE Fabric Protectant & Cleaner Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-fabric-protectant-deep-clean-kit|BF-440PDCK|CUSTOM-ITEM|"BLACKFIRE Fabric Protectant & Deep Clean Kit"|""|(73.95)|(59.99)|T|""|""|""|""|""|"Deep clean your carpet and fabric surfaces!

The BLACKFIRE Fabric Protectant & Deep Clean Kit is designed to get those hard-to-remove spots in your carpet or fabric surfaces using BLACKFIRE APC and then followed up with protection against future spills, dirt, or other contaminants with the BLACKFIRE Fabric Protectant! You'll be impressed with the extended capabilities of the BLACKFIRE Fabric Protectant that only a BLACKFIRE product can produce!

BLACKFIRE Fabric Protectant
BLACKFIRE Fabric Protectant makes caring for your cars carpet or fabric interior nearly effortless. By applying an ultra-hydrophobic layer of protection to the surface, BLACKFIRE Fabric Protectant will prevent any moisture from being absorbed by your carpet and upholstery. Whether you spill your morning cup of coffee, forget to bring a towel with you on your beach trip, or get caught in a rainstorm on your way to the car, BLACKFIRE Fabric Protectant will make sure your fabric doesn’t suffer the consequences!

BLACKFIRE APC All-Purpose Cleaner
BLACKFIRE APC All-Purpose Cleaner brings new meaning to the word ""versatile."" Used full-strength, it is an aggressive, grease-cutting cleaner for engine compartments and wheels. When diluted 4:1, it's a gentle cleaner for leather seats and paintwork. Dilute BLACKFIRE APC All-Purpose Cleaner to clean virtually anything, safely and effectively. It's the only APC you need!

Mat & Carpet Scrub Brush
More than your standard issue scrub brush, this one is a powerhouse against inevitable spills and ground in dirt underfoot because of its superior quality. Your carpets and mats are one of the most visible, yet hardest to maintain parts of the car. The right tool, with the right product will help you keep your mats and carpet looking their best.

36 Ounce Detail Bottle with Sprayer
For the serious detailer, we now have a heavy-duty spray trigger bottle. You can use it to spray both interior and exterior detail chemicals when cleaning your car. This bottle is also useful around the house and yard. The 36 ounce bottle is constructed of PVC for extra durability.

Yellow All-Purpose Microfiber Towels - 3 Pack
All-Purpose Towels are superior to terry cloth in softness, durability, and absorbency. These are safe on any surface.

Kit Includes:
BLACKFIRE Fabric Protectant 32 oz.
BLACKFIRE APC All-Purpose Cleaner 32 oz.
Mat & Carpet Scrub Brush
36 Ounce Detail Bottle with Sprayer
(3) Yellow All-Purpose Microfiber Towels

A savings of $13.96! "|"BLACKFIRE Fabric Protectant & Deep Clean Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-fabric-protectant|BF-440|CUSTOM-ITEM|"BLACKFIRE Fabric Protectant 32 oz."|"https://www.blackfirewax.com/blackfire-fabric-protectant.html"|(29.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"It’s easy to apply and your fabric stays dry!

BLACKFIRE Fabric Protectant makes caring for your cars carpet or fabric interior nearly effortless. By applying an ultra-hydrophobic layer of protection to the surface, BLACKFIRE Fabric Protectant will prevent any moisture from being absorbed by your carpet and upholstery. Whether you spill your morning cup of coffee, forget to bring a towel with you on your beach trip, or get caught in a rainstorm on your way to the car, BLACKFIRE Fabric Protectant will make sure your fabric doesn’t suffer the consequences!

---

---

There are numerous advantages to fabric and carpet interiors. They are fairly inexpensive and often the default option for most widely produced cars on the market today. They are much more forgiving than leather or vinyl when you are climbing into your car during a hot summer day. They are also more durable than most other types of car interiors and will usually last much longer. However, they do fall short in one major capacity. They get dirty easily and they are much more difficult to clean. This is because fabric and carpet acts like a sponge for any sort of liquid or contamination that touches it.

---

---

BLACKFIRE Fabric Protectant helps to solve this pitfall that fabric has by counteracting the absorbent nature of the material. BLACKFIRE Fabric Protectant is formulated using an ingredient that does not interact with liquid. In fact, it actively repels liquid molecules like the North ends of two magnets would. This means that when a fabric surface is coated with BLACKFIRE Fabric Protectant it becomes extremely hydrophobic! As such, any liquid that fabric comes into contact with will simply fall off or sit on the surface without being absorbed!

---

---

It doesn’t even matter what kind of liquid it is either! BLACKFIRE Fabric Protectant will be able to protect equally as well despite whether the liquid is hot or cold or how thick or thin it is! BLACKFIRE Fabric Protectant will protect from a slew of different liquids and contaminants, but just to name a few:
• Mud
• Rain water
• Coffee
• Soda/Pop
• Snow
• And many, many more!

Fabric interior may be hard to keep clean, but it doesn’t have to be the as hard as it is now! You can cut out the vast majority of your fabric cleaning and care requirements with BLACKFIRE Fabric Protectant alone. So, do you, your interior, and your passengers a huge favor, spray some BLACKFIRE Fabric Protectant on those seats!

Directions for Use:
Spray BLACKFIRE Fabric Protectant directly onto clean, dry fabric surfaces, until evenly coated, and let air dry.
Do not oversaturate fabric surface.
Let cure for 12-24 hours, depending on temperature.
Treated fabric must be completely cured before exposing to rain and moisture.

32 oz. "|"BLACKFIRE Fabric Protectant 32 oz."|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-fabric-protectant-bundle|BF-440PB|CUSTOM-ITEM|"BLACKFIRE Fabric Protectant Bundle"|"https://www.blackfirewax.com/bf-fabric-protectant-bundle.html"|(42.97)|(34.99)|T|""|""|""|""|""|"The perfect bundle to protecting all of your fabric surfaces!

BLACKFIRE Fabric Protectant is sweeping through the detailing world and its users are finding out just how many fabric surfaces they are able to protect! From shoes, carpets, fabric seats, and even paper towels—BLACKFIRE Fabric Protectant is your one-stop-shop for all your fabric needs. No more spills, dirt, sand, or water leakage on your fabric surfaces! And with the BLACKFIRE Fabric Protectant Bundle you can ensure that you'll have everything you need to keep your fabric protected for the long haul!

BLACKFIRE Fabric Protectant
BLACKFIRE Fabric Protectant makes caring for your cars carpet or fabric interior nearly effortless. By applying an ultra-hydrophobic layer of protection to the surface, BLACKFIRE Fabric Protectant will prevent any moisture from being absorbed by your carpet and upholstery. Whether you spill your morning cup of coffee, forget to bring a towel with you on your beach trip, or get caught in a rainstorm on your way to the car, BLACKFIRE Fabric Protectant will make sure your fabric doesn’t suffer the consequences!

Mat & Carpet Scrub Brush
More than your standard issue scrub brush, this one is a powerhouse against inevitable spills and ground in dirt underfoot because of its superior quality. Your carpets and mats are one of the most visible, yet hardest to maintain parts of the car. The right tool, with the right product will help you keep your mats and carpet looking their best.

Yellow All-Purpose Microfiber Towels - 3 Pack
All-Purpose Towels are superior to terry cloth in softness, durability, and absorbency. These are safe on any surface.

Kit Includes:
BLACKFIRE Fabric Protectant 32 oz.
Mat & Carpet Scrub Brush
(3) Yellow All-Purpose Microfiber Towels

A savings of $7.98! "|"BLACKFIRE Fabric Protectant Bundle"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-flex-one-step-paint-revitalizing-kit|BF-FLEX-PRK|CUSTOM-ITEM|"BLACKFIRE FLEX 3401 One Step Paint Revitalizing Kit"|"https://www.blackfirewax.com/blackfire-flex-one-step-paint-revitalizing-kit.html"|(566.86)|(489.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"Consistency meet efficiency!

The BLACKFIRE FLEX 3401 One Step Paint Revitalizing Kit was designed with efficiency in mind! If you want to get your paint looking as great as it can, as fast as possible, then the BLACKFIRE FLEX 3401 One Step Paint Revitalizing Kit is the ticket! The BLACKFIRE One Step included in this kit will not only correct the swirls and scratches in your paint, but it will also finish it off by applying a durable layer of protection! Combining this product with the consistency and reliability of the FLEX 3401 and Lake Country pads means that you will be able to give your car the perfect finish, in the perfect amount of time, for years to come!

Items in this kit:

FLEX XC 3401 VRG Dual-Action Polisher
The FLEX XC 3401 Orbital Polisher is a dual action polisher on steroids! The FLEX XC3401 VRG buffer effectively removes swirls, scratches, and oxidation that can’t be removed using other D.A. polishers. The FLEX XC3401 VRG Polisher is one of the best polishers we’ve ever tested!

BLACKFIRE One Step
BLACKFIRE One Step is an all-in-one product that will remove light swirls and paint dullness from your paint while also laying down an intense, high-grade paint sealant onto the surface. A genuine one step product, BLACKFIRE One Step is perfect for professional detailers looking to enhance their service selection, as well as the DIY enthusiast that wants high-performing product that isn’t complicated. BLACKFIRE One Step is here to change the paint perfecting game – and it’s already performing!

BLACKFIRE Advanced Pad Cleaner
BLACKFIRE Advanced Pad Cleaner prolongs the usefulness of your buffing pads by removing product residues. When pads are cleaned thoroughly after every use, they maintain their texture and performance far longer. You'll save money and you'll get better results with your existing pads. Use BLACKFIRE Advanced Pad Cleaner to clean foam and wool pads after every detail.

BLACKFIRE Advanced Pad Conditioner
BLACKFIRE Advanced Pad Conditioner makes machine detailing easier by reducing friction between the pad and the paint. Products glide on more smoothly and the paint is protected from dry buffing. BLACKFIRE Advanced Pad Conditioner reduces skipping or sticking of the pad. Use it every time to prime your pads for perfection.

Lake Country White CCS Polishing Pad
Less dense foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so it’s perfect for pre-wax cleaners.

Pad Brush
The Edge Foam Pad Conditioning Brush removes excess, caked polish and restores the usable texture to your foam pads in seconds. An angled handle and textured grip give you excellent leverage as you press the brush against a spinning pad. Don’t stop working – clean the pad and keep polishing!

Edgeless Microfiber Polishing Clothes
The Edgeless Microfiber Polishing Cloth is woven specifically for wax and polish removal. It has a soft touch that is extra gentle on sensitive clear coat finishes. Plus, the cloth has no edges, making accidental scratches virtually impossible. Use this cloth the next time you wax your vehicle and I promise you'll never use anything else!

Kit includes
1 x Flex XC 3401 VRG Dual-Action Polisher
1 x 32 oz. BLACKFIRE One Step
1 x 8 oz. BLACKFIRE Advanced Pad Cleaner
1 x 8 oz. BLACKFIRE Advanced Pad Conditioner
3 x 5.5 inch Lake Country White CCS Polishing Pad
1 x Pad Brush
6 x 16” x 16” Edgeless Microfiber Polishing Clothes

A total retail value of $579.86. Save $114.87! "|"BLACKFIRE FLEX 3401 One Step Paint Revitalizing Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-flex-polisher-kit|FLEX-BF7200|CUSTOM-ITEM|"BLACKFIRE Flex Swirl Remover Kit"|"http://www.blackfirewax.com/blackfire-flex-polisher-kit.html"|(640.71)|(519.99)|T|"Flex Power Tools"|"Flex Polishers"|""|""|""|"Bring your vehicle's paint back from the brink!

With the BLACKFIRE Flex Swirl Remover Kit, you don't have to settle for swirled, lackluster paint. Use the BLACKFIRE Flex Swirl Remover Kit to tackle paint imperfections on all finishes and restore optimum gloss. This is an unbeatable team!

BLACKFIRE formulas are the result of over twenty years of research with state-of-the-art polymers from Germany, Sweden and the US. BLACKFIRE waxes and sealants wipe on and buff off easily without streaks or hazy patches and with a shine that can last for six months or more. All BLACKFIRE products are surface-friendly and VOC compliant in all 50 states. These water-based formulas clean, condition, polish and protect without the strong solvents found in most car care products.

Flex XC 3401 VRG Orbital Polisher
The orbital rotation of the FLEX Polisher simulates the circular movement of the human hand while polishing. This motion is less likely to cause holograms than a rotary buffer. At the same time, the polisher's highly smooth running facilitates a careful, precise finish and allows for hologram-free polishing. The positive drive ensures a uniform movement, even under load, thanks to constant lift. Taken in conjunction with the large stroke length the FLEX can remove existing holograms from black finishes. The large stroke length refers to the size of the orbit. On many dual action polishers, this is a very small distance and therefore you feel a jiggling motion. On the FLEX polisher, the stroke length is 8 mm, a huge distance in terms of orbital polishers! The FLEX Dual-Action Polisher has a true dual action motion that reduces vibration. The FLEX Orbital Polisher’s smooth acceleration and uniform, controlled motion make this DA machine ideal for novices and pros alike. The FLEX XC3401 dual action polisher comes with a 5.5 Inch Hook & Loop Backing Plate and a 1 year manufacturer warranty.

32 oz. BLACKFIRE Compound
BLACKFIRE Compound was developed using the latest German technology for OEM applications. It removes up to 1,000 grit sanding scratches on fresh paint and an impressive range of imperfections from cured paint finishes. Application is user-friendly with a dual-action orbital or rotary polisher. BLACKFIRE Compound is the first step in creating a head-turning shine!

32 oz. BLACKFIRE Polish
BLACKFIRE Polish uses nano-abrasives to remove 2500-3000 grit sanding marks on fresh paints and to correct mild imperfections on cured paints. These fine abrasives burnish the finish to an incredible gloss! BLACKFIRE Polish can be used to refine the paint after compounding or as a one-step shine enhancing polish.

32 oz. BLACKFIRE Paint Sealant
BLACKFIRE Paint Sealant is a premium paint sealant designed for the perfectionist. It creates an extremely slick finish and incredible depth with a revolutionary blend of three incredible polymers. Sourced from Germany and Switzerland, these polymers have a protective quality and depth of gloss that surpassed all others tested. BLACKFIRE Paint Sealant refracts light, similar to a diamond, to create a vibrant, super slippery, head-turning finish.

32 oz. BLACKFIRE Synthetic Spray Wax
BLACKFIRE Synthetic Spray Wax creates a long lasting shine with a high concentration of BLACKFIRE’s amazing tri-polymer Wet Diamond polymers. This spray-on paint sealant contains light cleaners to remove dust and smudges while reinforcing and extending existing paint protection. Use it over waxes or paint sealants to maintain a fresh, clean shine all the time! Each bottle of BLACKFIRE Synthetic Spray Wax is packed with Wet Diamond polymers making this an excellent stand-alone sealant as well!

8 oz. BLACKFIRE Advanced Pad Cleaner
BLACKFIRE Advanced Pad Cleaner prolongs the usefulness of your buffing pads by removing product residues. When pads are cleaned thoroughly after every use, they maintain their texture and performance far longer. You'll save money and you'll get better results with your existing pads. Use Blackfire Advanced Pad Cleaner to clean foam and wool pads after every detail.

8 oz. BLACKFIRE Advanced Pad Conditioner
BLACKFIRE Advanced Pad Conditioner makes machine detailing easier by reducing friction between the pad and the paint. Products glide on more smoothly and the paint is protected from dry buffing. BLACKFIRE Advanced Pad Conditioner reduces skipping or sticking of the pad. Use it every time to prime your pads for perfection.

CCS 6.5 inch Orange Light Cutting Pad
When used with the proper polishing compounds, this orange pad removes 2000 grit sanding traces, swirls and paint defects with minimal or no surface dullness. This pad creates so little haze that you can often go from compounding right to finishing without the intermediate polishing steps. Where polishing is still required (often on black and red cars), it can be accomplished in a fraction of the time it would take with standard pads. Use this pad and polishing compound to remove swirls, water spots, and fine scratches.

CCS 6.5 inch White Polishing Pad
The most often used pad. This pad has a mild cutting (cleaning) action and should be used to apply light compounds, polishes and one-step, cleaner/waxes. Use this White CCS Polishing Pad to apply one-step, polish/sealants.

CCS 6.5 Inch Black Black Finishing Foam Pad
Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.

2 All Purpose Microfiber Towels (color may vary)
Use these microfiber detailing towels for drying, buffing, or as a finishing wipe down. Microfiber is designed to be light, strong, super-absorbent and quick drying. The fibers are non-abrasive, and are woven so tightly that it’s absolutely lint free and extremely durable. Unbelievably, these ultra-tough fibers are engineered to absorb seven times their weight in moisture.

Kit includes:
Flex XC 3401 VRG Orbital Polisher
32 oz. BLACKFIRE Compound
32 oz. Polish
32 oz. BLACKFIRE Paint Sealant
32 oz. BLACKFIRE Synthetic Spray Wax
20 oz. Blackfire Wet Diamond Polymer Spray
8 oz. BLACKFIRE Advanced Pad Cleaner
8 oz. BLACKFIRE Advanced Pad Conditioner
CCS 6.5 inch Orange Light Cutting Pad
CCS 6.5 inch White Polishing Pad
CCS 6.5 Inch Black Black Finishing Foam Pad
2 All Purpose Microfiber Towels (color may vary)

Retail value of the kit is $594.71, giving you a savings of $49.71! Additional discounts are not applicable on this item.
Please call 844-216-3966 for an expedited shipping quote on this item. "|"BLACKFIRE Flex Swirl Remover Kit "|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-flex-total-correction-kit|BF-FLEX-TCK|CUSTOM-ITEM|"BLACKFIRE FLEX Total Correction Kit"|"https://www.blackfirewax.com/blackfire-flex-total-correction-kit.html"|(575.88)|(499.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"A professional’s kit at a hobbyist’s price!

You’ve already decided that you’re going to have to do a full, multi-step paint correction process, you may as well only have to do it once! The BLACKFIRE FLEX Total Correction Kit will make sure that the results you get from your paint correction will make all your time worth it! The professional grade abrasives in BLACKFIRE Polish & BLACKFIRE Compound will provide amazing paint correction while finishing off to a flawlessly even gloss! Plus, you can’t be the power and durability of the FLEX 3401! They don’t call it “The Beast” for nothing!

Items in this kit:

Flex XC 3401 VRG Dual Action Polisher
The FLEX XC 3401 Orbital Polisher is a dual action polisher on steroids! The FLEX XC3401 VRG buffer effectively removes swirls, scratches, and oxidation that can’t be removed using other D.A. polishers. The FLEX XC3401 VRG Polisher is one of the best polishers we’ve ever tested!

Blackfire Compound
BLACKFIRE Compound was developed using the latest German technology for OEM applications. It removes up to 1,000 grit sanding scratches on fresh paint and an impressive range of imperfections from cured paint finishes. Application is user-friendly with a dual-action orbital or rotary polisher. BLACKFIRE Compound is the first step in creating a head-turning shine!

Blackfire Polish
BLACKFIRE Polish uses nano-abrasives to remove 2500-3000 grit sanding marks on fresh paints and to correct mild imperfections on cured paints. These fine abrasives burnish the finish to an incredible gloss! BLACKFIRE Polish can be used to refine the paint after compounding or as a one-step shine enhancing polish.

Blackfire Advanced Pad Cleaner
BLACKFIRE Advanced Pad Cleaner prolongs the usefulness of your buffing pads by removing product residues. When pads are cleaned thoroughly after every use, they maintain their texture and performance far longer. You'll save money and you'll get better results with your existing pads. Use Blackfire Advanced Pad Cleaner to clean foam and wool pads after every detail.

Blackfire Advanced Pad Conditioner
BLACKFIRE Advanced Pad Conditioner makes machine detailing easier by reducing friction between the pad and the paint. Products glide on more smoothly and the paint is protected from dry buffing. BLACKFIRE Advanced Pad Conditioner reduces skipping or sticking of the pad. Use it every time to prime your pads for perfection.

Buff and Shine Yellow Medium Cutting Pad
Buff and Shine Yellow Foam Medium Cutting Pads are composed of dense foam and provide a medium cut level. These pads are capable of correcting moderate to heavy swirl marks and scratches.

Buff and Shine Blue Light Polishing Pad
Buff and Shine Blue Foam Light Polishing Pads provide a slight amount of cut—just enough to activate the abrasives or cleaners in an all-in-one cleaner wax, finishing polish, or glaze.

Storm Gray Edgeless Microfiber Polishing Cloths
The Storm Gray Edgeless Microfiber Polishing Cloth is woven specifically for wax and polish removal. It has a soft touch that is extra gentle on sensitive clear coat finishes. Plus, the cloth has no edges, making accidental scratches virtually impossible. Use this cloth the next time you wax your vehicle and I promise you’ll never use anything else!

Kit includes
1 x Flex XC 3401 VRG Dual Action Polisher
1 x 8 oz. Blackfire Compound
1 x 8 oz. Blackfire Polish
1 x 8 oz. Blackfire Advanced Pad Cleaner
1 x 8 oz. Blackfire Advanced Pad Conditioner
2 x 6 inch Buff and Shine Yellow Medium Cutting Pad
2 x 6 inch Buff and Shine Blue Light Polishing Pad
3 x 16” x 16” Storm Gray Edgeless Microfiber Polishing Cloths

A total retail value of $573.90. Save $ 113.91!"|"BLACKFIRE FLEX Total Correction Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-flex-xfe-polisher-kit|FLEX-BF-7200-CMB|CUSTOM-ITEM|"BLACKFIRE Flex XFE Swirl Remover Kit"|"https://www.blackfirewax.com/blackfire-flex-xfe-polisher-kit.html"|(640.71)|(584.99)|T|""|""|""|""|""|"Perfect for any paint, in any condition!

FLEX XFE7-15 & BLACKFIRE Total Swirl Remover Kit brings new meaning to the phrase “paint correction”. When the new and improved BLACKFIRE Compound and BLACKFIRE Polish is combined with the long-throw, fast-correcting power of the FLEX XFE7-15, swirls, scratches, and other paint imperfections will disappear! Once you’ve corrected your paint, seal it all in and keep up that amazing shine with BLACKFIRE Synthetic Spray Wax and hit to town to show off your new ride. FLEX XFE7-15 & BLACKFIRE Total Swirl Remover Kit includes:

FLEX XFE7-15 Long Stroke Orbital Polisher The FLEX XFE7-15 150 Long Stroke Orbital Polisher is a free-spinning, dual action paint polishing machine that embodies everything that is “FLEX”. From the same manufacturer that brought you the FLEX XC3401, the FLEX XFE7-15 Long Stroke Orbital Polisher has a 15 mm stroke length to cover more area and help you breeze through a detail. The extra cooling vents to prevent overheating, and a more streamlined, ergonomically correct body, along with the massive throw, makes the FLEX XFE7-15 Long Stroke Orbital Polisher a serious contender in the world of long throw polishers.

32 oz. BLACKFIRE Compound BLACKFIRE Compound was developed using the latest German technology for OEM applications. It removes up to 1,000 grit sanding scratches on fresh paint and an impressive range of imperfections from cured paint finishes. Application is user-friendly with a dual-action orbital or rotary polisher. BLACKFIRE Compound is the first step in creating a head-turning shine!

32 oz. BLACKFIRE Polish BLACKFIRE Polish uses nano-abrasives to remove 2500-3000 grit sanding marks on fresh paints and to correct mild imperfections on cured paints. These fine abrasives burnish the finish to an incredible gloss! BLACKFIRE Polish can be used to refine the paint after compounding or as a one-step shine enhancing polish.

32 oz. BLACKFIRE Synthetic Spray Wax BLACKFIRE Synthetic Spray Wax creates a long lasting shine with a high concentration of BLACKFIRE’s amazing tri-polymer Wet Diamond polymers. This spray-on paint sealant contains light cleaners to remove dust and smudges while reinforcing and extending existing paint protection. Use it over waxes or paint sealants to maintain a fresh, clean shine all the time! Each bottle of BLACKFIRE Synthetic Spray Wax is packed with Wet Diamond polymers making this an excellent stand-alone sealant as well!

CCS 5.5 inch Orange Light Cutting Pad When used with the proper polishing compounds, this orange pad removes 2000 grit sanding traces, swirls and paint defects with minimal or no surface dullness. This pad creates so little haze that you can often go from compounding right to finishing without the intermediate polishing steps. Where polishing is still required (often on black and red cars), it can be accomplished in a fraction of the time it would take with standard pads. Use this pad and polishing compound to remove swirls, water spots, and fine scratches.

CCS 5.5 inch White Polishing Pad The most often used pad. This pad has a mild cutting (cleaning) action and should be used to apply light compounds, polishes and one-step, cleaner/waxes. Use this White CCS Polishing Pad to apply one-step, polish/sealants.

CCS 5.5 inch Black Finishing Foam Pad Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.

8 oz. BLACKFIRE Advanced Pad Cleaner BLACKFIRE Advanced Pad Cleaner prolongs the usefulness of your buffing pads by removing product residues. When pads are cleaned thoroughly after every use, they maintain their texture and performance far longer. You'll save money and you'll get better results with your existing pads. Use Blackfire Advanced Pad Cleaner to clean foam and wool pads after every detail.

8 oz. BLACKFIRE Advanced Pad Conditioner BLACKFIRE Advanced Pad Conditioner makes machine detailing easier by reducing friction between the pad and the paint. Products glide on more smoothly and the paint is protected from dry buffing. BLACKFIRE Advanced Pad Conditioner reduces skipping or sticking of the pad. Use it every time to prime your pads for perfection.

2 All Purpose Microfiber Towels (color may vary) Use these microfiber detailing towels for drying, buffing, or as a finishing wipe down. Microfiber is designed to be light, strong, super-absorbent and quick drying. The fibers are non-abrasive, and are woven so tightly that it’s absolutely lint free and extremely durable. Unbelievably, these ultra-tough fibers are engineered to absorb seven times their weight in moisture.

The products in this kit work best when applied with a polisher. With the included 6.5 inch pads, we suggest using the Porter Cable 7424 XP for paint correction, polishing, and wax application.

Use the BLACKFIRE Total Swirl Remover Kit to restore, protect, and maintain auto paint using the latest in surface care technology from BLACKFIRE.

Kit includes:
1 FLEX XFE7-15 Long Stroke Orbital Polisher 1 32 oz. Blackfire Compound
1 32 oz. Blackfire Polish
1 32 oz. Blackfire Synthetic Spray Wax
1 CCS 5.5 inch Orange Light Cutting Pad  
1 CCS 5.5 inch White Polishing Pad
1 CCS 5.5 inch Black Finishing Foam Pad
1 8 oz. BLACKFIRE Advanced Pad Cleaner
1 8 oz. BLACKFIRE Advanced Pad Conditioner
1 16x16"" All Purpose Microfiber Towels (color may vary)

A total retail value of $627.71. Save $52.72!

"|""|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-foam-booster|BF-125|CUSTOM-ITEM|"BLACKFIRE Foam Booster"|"https://www.blackfirewax.com/blackfire-foam-booster.html"|(27.99)||T|""|""|""|""|""|"Make any car soap a FOAMING car soap!

BLACKFIRE Foam Booster is a uniquely specialized formula that, when added to any car wash soap will instantly transform it into a foaming car wash! Using a highly concentrated blend of lubricating agents and advanced polymers, BLACKFIRE Foam Booster enhances the cleaning power of your car soap for an overall safer washing experience. Foam is what makes the car wash perform and with BLACKFIRE Foam Booster, you’ll never experience a foam shortage again!

One of the biggest things that make a car wash successful is the amount of foam produced. Foam creates a sort of barrier between your car’s surface and any dirt and debris, safely removing them before they can scratch or mar the surface. BLACKFIRE Foam Booster is a foaming agent that will enhance any car soap and give it the perfect amount of suds.

After adding BLACKFIRE Foam Booster to the car wash solution in your Foam Gun, you are ready to coat your car in mountains of foam! Regardless of whether or not your car wash was foaming already or not, after BLACKFIRE Foam Booster it will be!

Contrary to popular belief, not all car soap is created equal. There are wash and wax formulas that leave a layer of protection, ultra-cleaning formulas that strip away any surface protection, and so on and so forth. How many times have you found a shampoo that you love only to find out it doesn’t perform quite as well when used with a foam gun or foam cannon? With BLACKFIRE Foam Booster, that doesn’t have to ever happen again!

BLACKFIRE Foam Booster is not a car wash in itself. It is simply a foaming agent that will enhance the car wash that it’s added to! Even if the car wash you already have sitting in your garage isn’t a “foaming” wash, after a quick doctoring with BLACKFIRE Foam Booster, it will be!

Keep every car wash you perform a safe car wash with BLACKFIRE Foam Booster!

---

---

Directions for use:
To transform any standard car wash into a foaming shampoo, simply add Foam Booster to your car wash bottle or to the car wash shampoo already in your foam cannon, foam gun, or wash bucket for an increased amount of suds produced. BLACKFIRE Foam Booster is extremely concentrated – a little goes a long way! 16 oz. "|"BLACKFIRE Foam Booster, foaming booster shampoo"|""|""|""|""|""|""|"(:BLACKFIRE-FOAM-BOOSTER-GALLON)"|""||""|""|""|""|""|""||0| blackfire-foam-booster-gallon|BF-125-128|CUSTOM-ITEM|"BLACKFIRE Foam Booster 128 oz."|"https://www.blackfirewax.com/blackfire-foam-booster-gallon.html"|(105)||T|"Blackfire Car Care"|""|""|""|""|"Make any car soap a FOAMING car soap!

BLACKFIRE Foam Booster is a uniquely specialized formula that, when added to any car wash soap will instantly transform it into a foaming car wash! Using a highly concentrated blend of lubricating agents and advanced polymers, BLACKFIRE Foam Booster enhances the cleaning power of your car soap for an overall safer washing experience. Foam is what makes the car wash perform and with BLACKFIRE Foam Booster, you’ll never experience a foam shortage again!

One of the biggest things that make a car wash successful is the amount of foam produced. Foam creates a sort of barrier between your car’s surface and any dirt and debris, safely removing them before they can scratch or mar the surface. BLACKFIRE Foam Booster is a foaming agent that will enhance any car soap and give it the perfect amount of suds.

After adding BLACKFIRE Foam Booster to the car wash solution in your Foam Gun, you are ready to coat your car in mountains of foam! Regardless of whether or not your car wash was foaming already or not, after BLACKFIRE Foam Booster it will be!

Contrary to popular belief, not all car soap is created equal. There are wash and wax formulas that leave a layer of protection, ultra-cleaning formulas that strip away any surface protection, and so on and so forth. How many times have you found a shampoo that you love only to find out it doesn’t perform quite as well when used with a foam gun or foam cannon? With BLACKFIRE Foam Booster, that doesn’t have to ever happen again!

BLACKFIRE Foam Booster is not a car wash in itself. It is simply a foaming agent that will enhance the car wash that it’s added to! Even if the car wash you already have sitting in your garage isn’t a “foaming” wash, after a quick doctoring with BLACKFIRE Foam Booster, it will be!

Keep every car wash you perform a safe car wash with BLACKFIRE Foam Booster!

Directions for use:
To transform any standard car wash into a foaming shampoo, simply add Foam Booster to your car wash bottle or to the car wash shampoo already in your foam cannon, foam gun, or wash bucket for an increased amount of suds produced. BLACKFIRE Foam Booster is extremely concentrated – a little goes a long way! 128 oz. "|"BLACKFIRE Foam Booster, foaming booster shampoo"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-125-duo|BF-125-128-P|CUSTOM-ITEM|"BLACKFIRE Foam Booster Duo Pack"|"https://www.blackfirewax.com/bf-125-duo.html"|(117.98)|(89.9)|T|""|""|""|""|""|"Make any car soap a FOAMING car soap!

BLACKFIRE Foam Booster is a uniquely specialized formula that, when added to any car wash soap will instantly transform it into a foaming car wash! Using a highly concentrated blend of lubricating agents and advanced polymers, BLACKFIRE Foam Booster enhances the cleaning power of your car soap for an overall safer washing experience. Foam is what makes the car wash perform and with BLACKFIRE Foam Booster, you’ll never experience a foam shortage again!

One of the biggest things that make a car wash successful is the amount of foam produced. Foam creates a sort of barrier between your car’s surface and any dirt and debris, safely removing them before they can scratch or mar the surface. BLACKFIRE Foam Booster is a foaming agent that will enhance any car soap and give it the perfect amount of suds.

After adding BLACKFIRE Foam Booster to the car wash solution in your Foam Gun, you are ready to coat your car in mountains of foam! Regardless of whether or not your car wash was foaming already or not, after BLACKFIRE Foam Booster it will be!

Contrary to popular belief, not all car soap is created equal. There are wash and wax formulas that leave a layer of protection, ultra-cleaning formulas that strip away any surface protection, and so on and so forth. How many times have you found a shampoo that you love only to find out it doesn’t perform quite as well when used with a foam gun or foam cannon? With BLACKFIRE Foam Booster, that doesn’t have to ever happen again!

BLACKFIRE Foam Booster is not a car wash in itself. It is simply a foaming agent that will enhance the car wash that it’s added to! Even if the car wash you already have sitting in your garage isn’t a “foaming” wash, after a quick doctoring with BLACKFIRE Foam Booster, it will be!

Keep every car wash you perform a safe car wash with BLACKFIRE Foam Booster!

---

---

Directions for use:
To transform any standard car wash into a foaming shampoo, simply add Foam Booster to your car wash bottle or to the car wash shampoo already in your foam cannon, foam gun, or wash bucket for an increased amount of suds produced. BLACKFIRE Foam Booster is extremely concentrated – a little goes a long way! 16 oz. "|"BLACKFIRE Foam Booster Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-foam-soap|BF-105|CUSTOM-ITEM|"BLACKFIRE Foam Soap"|"https://www.blackfirewax.com/blackfire-foam-soap.html"|(27.99)||T|"Blackfire Car Care"|""|""|""|""|"High-foaming, ultra-concentrated, and easy to use!

BLACKFIRE Foam Soap is a highly concentrated foaming shampoo formula that will create a mountain of suds for the ultimate car wash! Formulated using extreme lubricity agents, BLACKFIRE Foam Soap creates the perfect amount of tension on your car’s surface, allowing dirt and debris to be removed without harming your paint. BLACKFIRE Foam Soap can be used alone in your car wash bucket, but for extreme results, use with your favorite foam gun or foam cannon. Washing your car has never been more fun!

Since vehicles have been invented, people have been looking for ways to keep them clean. And that stands true today – even with the ever evolving market of car care products churning out new products, the basics remain the same, and washing your car is one of them. BLACKFIRE Foam Soap was created as an advanced car wash formula with one thing in mind – a safer wash.

The more foamy your car wash is, the safer it will be. The amount of foam created by BLACKFIRE Foam Soap captures all dirt, dust, and debris particles on your paint and transfers them to your washing medium with the least amount of pressure. This means they spend less time on your paint, potentially causing swirls and scratches.

Starting from the first shot, BLACKFIRE Foam Soap creates huge amounts of suds and foam, and in seconds your entire vehicle will be coated!

BLACKFIRE Foam Soap was created with paint coatings in mind. Featuring a pH-balanced formula, any existing paint, glass, or trim coating will retain the same gloss and hydrophobic qualities as it did before – it’ll just be cleaner now! BLACKFIRE Foam Soap will not remove or alter any existing coatings.

When used with a foam gun or foam cannon, BLACKFIRE Foam Soap lays down a thick layer of foam that clings to your vehicles surface, allowing for the perfect pre-soak. Depending on how dirty your paint is, you may not even need a wash mitt for removal!

Give your car the best wash possible with BLACKFIRE Foam Soap – the ultra-concentrated, high-lubricity, high-foaming, and easy-to-use car wash.

---

---

Directions for use:
BLACKFIRE Foam Soap is ultra-concentrated and can be used in a foam gun or cannon, or alone in a wash bucket.

For use with FOAM GUNS: Mix 2 oz. of BLACKFIRE Foam Soap with approximately 6-8 ounces of water and shake well.

For use with BUCKETS: For every 5 gallons of water used, add 2-3 oz. of BLACKFIRE Foam Soap. Produce suds using a strong jet of water into the bucket. Wash and rinse accordingly. 32 oz. "|"BLACKFIRE Foam Soap, foaming shampoo"|""|""|""|""|""|""|"(:BLACKFIRE-FOAM-SOAP-GALLON :BLACKFIRE-FOAM-SOAP-5G)"|""||""|""|""|""|""|""||0| blackfire-foam-soap-gallon|BF-105-128|CUSTOM-ITEM|"BLACKFIRE Foam Soap 128 oz."|"https://www.blackfirewax.com/blackfire-foam-soap-gallon.html"|(79.99)||T|"Blackfire Car Care"|""|""|""|""|"High-foaming, ultra-concentrated, and easy to use!

BLACKFIRE Foam Soap is a highly concentrated foaming shampoo formula that will create a mountain of suds for the ultimate car wash! Formulated using extreme lubricity agents, BLACKFIRE Foam Soap creates the perfect amount of tension on your car’s surface, allowing dirt and debris to be removed without harming your paint. BLACKFIRE Foam Soap can be used alone in your car wash bucket, but for extreme results, use with your favorite foam gun or foam cannon. Washing your car has never been more fun!

Since vehicles have been invented, people have been looking for ways to keep them clean. And that stands true today – even with the ever evolving market of car care products churning out new products, the basics remain the same, and washing your car is one of them. BLACKFIRE Foam Soap was created as an advanced car wash formula with one thing in mind – a safer wash.

The more foamy your car wash is, the safer it will be. The amount of foam created by BLACKFIRE Foam Soap captures all dirt, dust, and debris particles on your paint and transfers them to your washing medium with the least amount of pressure. This means they spend less time on your paint, potentially causing swirls and scratches.

Starting from the first shot, BLACKFIRE Foam Soap creates huge amounts of suds and foam, and in seconds your entire vehicle will be coated!

BLACKFIRE Foam Soap was created with paint coatings in mind. Featuring a pH-balanced formula, any existing paint, glass, or trim coating will retain the same gloss and hydrophobic qualities as it did before – it’ll just be cleaner now! BLACKFIRE Foam Soap will not remove or alter any existing coatings.

When used with a foam gun or foam cannon, BLACKFIRE Foam Soap lays down a thick layer of foam that clings to your vehicles surface, allowing for the perfect pre-soak. Depending on how dirty your paint is, you may not even need a wash mitt for removal!

Give your car the best wash possible with BLACKFIRE Foam Soap – the ultra-concentrated, high-lubricity, high-foaming, and easy-to-use car wash.

Directions for use:
BLACKFIRE Foam Soap is ultra-concentrated and can be used in a foam gun or cannon, or alone in a wash bucket.

For use with FOAM GUNS: Mix 2 oz. of BLACKFIRE Foam Soap with approximately 6-8 ounces of water and shake well.

For use with BUCKETS: For every 5 gallons of water used, add 2-3 oz. of BLACKFIRE Foam Soap. Produce suds using a strong jet of water into the bucket. Wash and rinse accordingly. 128 oz. "|"BLACKFIRE Foam Soap, foaming shampoo"|""|""|""|""|""|""|"(:BLACKFIRE-FOAM-SOAP-5G)"|""||""|""|""|""|""|""||0| blackfire-foam-soap-5g|BF-105-5G|CUSTOM-ITEM|"BLACKFIRE Foam Soap 5 Gallon"|"https://www.blackfirewax.com/blackfire-foam-soap-5g.html"|(299.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"High-foaming, ultra-concentrated, and easy to use!

BLACKFIRE Foam Soap is a highly concentrated foaming shampoo formula that will create a mountain of suds for the ultimate car wash! Formulated using extreme lubricity agents, BLACKFIRE Foam Soap creates the perfect amount of tension on your car’s surface, allowing dirt and debris to be removed without harming your paint. BLACKFIRE Foam Soap can be used alone in your car wash bucket, but for extreme results, use with your favorite foam gun or foam cannon. Washing your car has never been more fun!

Since vehicles have been invented, people have been looking for ways to keep them clean. And that stands true today – even with the ever evolving market of car care products churning out new products, the basics remain the same, and washing your car is one of them. BLACKFIRE Foam Soap was created as an advanced car wash formula with one thing in mind – a safer wash.

The more foamy your car wash is, the safer it will be. The amount of foam created by BLACKFIRE Foam Soap captures all dirt, dust, and debris particles on your paint and transfers them to your washing medium with the least amount of pressure. This means they spend less time on your paint, potentially causing swirls and scratches.

Starting from the first shot, BLACKFIRE Foam Soap creates huge amounts of suds and foam, and in seconds your entire vehicle will be coated!

BLACKFIRE Foam Soap was created with paint coatings in mind. Featuring a pH-balanced formula, any existing paint, glass, or trim coating will retain the same gloss and hydrophobic qualities as it did before – it’ll just be cleaner now! BLACKFIRE Foam Soap will not remove or alter any existing coatings.

When used with a foam gun or foam cannon, BLACKFIRE Foam Soap lays down a thick layer of foam that clings to your vehicles surface, allowing for the perfect pre-soak. Depending on how dirty your paint is, you may not even need a wash mitt for removal!

Give your car the best wash possible with BLACKFIRE Foam Soap – the ultra-concentrated, high-lubricity, high-foaming, and easy-to-use car wash.

Directions for use:
BLACKFIRE Foam Soap is ultra-concentrated and can be used in a foam gun or cannon, or alone in a wash bucket.

For use with FOAM GUNS: Mix 2 oz. of BLACKFIRE Foam Soap with approximately 6-8 ounces of water and shake well.

For use with BUCKETS: For every 5 gallons of water used, add 2-3 oz. of BLACKFIRE Foam Soap. Produce suds using a strong jet of water into the bucket. Wash and rinse accordingly.

5 Gallon (640 oz.)

This product is not available for expedited shipping.

"|"BLACKFIRE Foam Soap 5 Gallon"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-105-duo|BF-105-128-P|CUSTOM-ITEM|"BLACKFIRE Foam Soap Duo Pack"|"https://www.blackfirewax.com/bf-105-duo.html"|(84.98)|(59.99)|T|""|""|""|""|""|"High-foaming, ultra-concentrated, and easy to use!

BLACKFIRE Foam Soap is a highly concentrated foaming shampoo formula that will create a mountain of suds for the ultimate car wash! Formulated using extreme lubricity agents, BLACKFIRE Foam Soap creates the perfect amount of tension on your car’s surface, allowing dirt and debris to be removed without harming your paint. BLACKFIRE Foam Soap can be used alone in your car wash bucket, but for extreme results, use with your favorite foam gun or foam cannon. Washing your car has never been more fun!

Since vehicles have been invented, people have been looking for ways to keep them clean. And that stands true today – even with the ever evolving market of car care products churning out new products, the basics remain the same, and washing your car is one of them. BLACKFIRE Foam Soap was created as an advanced car wash formula with one thing in mind – a safer wash.

The more foamy your car wash is, the safer it will be. The amount of foam created by BLACKFIRE Foam Soap captures all dirt, dust, and debris particles on your paint and transfers them to your washing medium with the least amount of pressure. This means they spend less time on your paint, potentially causing swirls and scratches.

Starting from the first shot, BLACKFIRE Foam Soap creates huge amounts of suds and foam, and in seconds your entire vehicle will be coated!

BLACKFIRE Foam Soap was created with paint coatings in mind. Featuring a pH-balanced formula, any existing paint, glass, or trim coating will retain the same gloss and hydrophobic qualities as it did before – it’ll just be cleaner now! BLACKFIRE Foam Soap will not remove or alter any existing coatings.

When used with a foam gun or foam cannon, BLACKFIRE Foam Soap lays down a thick layer of foam that clings to your vehicles surface, allowing for the perfect pre-soak. Depending on how dirty your paint is, you may not even need a wash mitt for removal!

Give your car the best wash possible with BLACKFIRE Foam Soap – the ultra-concentrated, high-lubricity, high-foaming, and easy-to-use car wash.

---

---

Directions for use:
BLACKFIRE Foam Soap is ultra-concentrated and can be used in a foam gun or cannon, or alone in a wash bucket.

For use with FOAM GUNS: Mix 2 oz. of BLACKFIRE Foam Soap with approximately 6-8 ounces of water and shake well.

For use with BUCKETS: For every 5 gallons of water used, add 2-3 oz. of BLACKFIRE Foam Soap. Produce suds using a strong jet of water into the bucket. Wash and rinse accordingly. 32 oz. "|"BLACKFIRE Foam Soap Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-wax-applicator|BF-FOAMAPP-2|CUSTOM-ITEM|"BLACKFIRE Foam Wax Applicator Pads, 2 Pack"|"http://www.blackfirewax.com/blackfire-wax-applicator.html"|(7.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"The BLACKFIRE Foam Wax Applicator Pad was originally designed to spread even coats of BLACKFIRE BlackICE into buttery smooth, perfectly even coats, helping the award-winning super wax to create a breathtaking shine. Due to the insistent hounding of many BLACKFIRE fans, BLACKFIRE Foam Wax Applicators are now available individual purchase. You can enjoy the same effortless hand application of any car wax or paint sealant that BlackICE lovers have been spoiled with.

BLACKFIRE Foam Wax Applicators provide a stable, soft pad that forms around your fingers, yet glides across the paint for effortless application. The secret is the high PPI, low-absorption foam construction. PPI, or Pores Per Inch, measures the amount of pores or pockets across the foam. The huge amount of tightly-knit, extremely-fine pores produce an extremely soft feel. BLACKFIRE Foam Wax Applicators don't just apply wax to your paint, they pamper it.

The unique, black-foam BLACKFIRE Foam Wax Applicators keep your wax or paint sealant on the surface of the pad, instead of sucking it in; you get more coverage with less product. Instead, your wax or sealant will spread evenly across the paint in a uniform coat for unparallelled results. The BLACKFIRE Foam Wax Applicators are the ideal choice for getting maximum performance out of any wax, sealant or glaze.

What's more, BLACKFIRE Foam Wax Applicators reduce the effort needed for hand wax application. These thick, 4-inch wide, UFO-shaped discs allow you to grab them with your hand or simply press down with your palm or fingers. They conform around your hand for easy holding, while gliding across the paint with no effort. BLACKFIRE Foam Wax Applicator Pads prove that stunning, hand-applied results do not require blood, sweat or tears.

Use BLACKFIRE Advanced Pad Cleaner & Restorer to clean BLACKFIRE Foam Wax Applicator Pads after use.

2 Pack "|"BLACKFIRE Foam Wax Applicator Pads, 2 Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| gallon-jugs||CUSTOM-ITEM|"BLACKFIRE Gallon Jugs"|"https://www.blackfirewax.com/gallon-jugs.html"||||"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"If you use the product, buy it in bulk. You'll thank yourself!

No matter how frequently you use a particulary product, if you are using it repeatedly, chances are that you will be using a lot of it over time. When you will be using that much product, having to buy it 32 oz. at a time can not only be a hassle, but expensive as well! Now, there is no need for you to be wasting your time and your money on our favorite BLACKFIRE product! Buying gallon sized jugs is the perfect way to detail with convenience!"|"BLACKFIRE Gallon Jugs"|""|""|""|""|""|""|"(:BLACKFIRE-SHAMPOO :BLACKFIRE-FOAM-SOAP-GALLON :BLACKFIRE-WATERLESS-WASH-128 :BLACKFIRE-FOAM-BOOSTER-GALLON :BF-WASH-AND-WAX-128 :BLACKFIRE-BUG-BLOCKER-128 :BLACKFIRE-SUPER-DEGREASER-128 :BF-GLASS-WATER-SPOT-REMOVER-128 :BLACKFIRE-BUG-REMOVER-128 :BF-IRON-REMOVER-128 :BLACKFIRE-RINSELESS-WASH-128 :BLACKFIRE-GLOSS-POLISH :BF-220-128 :BF-221-128 :BLACKFIRE-ADVANCED-PAD-CLEANER-128 :BLACKFIRE-MIDNIGHT-SUN-DETAILER-128 :ALL-FINISH-PAINT-PROTECTION :BLACKFIRE-CARPET-UPHOLSTERY-CLEANER-128 :DEEP-GLOSS-SPRAY :BLACKFIRE-COATING-BOOSTER-128 :BLACKFIRE-PAINT-PREP-128 :INTERIOR-CLEANER-BLACKFIRE :BLACKFIRE-INTERIOR- :BF-WATER-SPOT-REMOVER-128 :SIO2-SPRAY-SEALANT-128 :BF-390-128 :BLACKFIRE-LEATHER :BLACKFIRE-LEATHER-COMPLETE-128 :GLASS-CLEANER-128 :BLACKFIRE-APC-128 :MULTI-SURFACE-DRESSING-128 :BF-LIQUID-BLACKICE-128 :CLAY-LUBE :READY-TO-USE-HYDROSEAL-128 :BLACKFIRE-CERAMIC-WASH-GALLON :GEL-WHEEL-AND-TIRE :NEWNAME :TOTAL-POLISH-SEAL-128)"|""||""|""|""|""|""|""||0| blackfire-gel-glass-cleaner|BF-770|CUSTOM-ITEM|"BLACKFIRE Gel Glass Cleaner"|"https://www.blackfirewax.com/blackfire-gel-glass-cleaner.html"|(21.99)||T|""|""|""|""|""|"A thick, non-streaking glass cleaner!

BLACKFIRE Gel Glass Cleaner is a thick formula that clings to glass in a non-streaking formula, that breaks down and removes contaminants. Safe to use on tinted glass, BLACKFIRE Gel Glass Cleaner is ammonia-free. BLACKFIRE Gel Glass Cleaner is easy-to-use, wiping off with ease.

Your windows are an important aspect to your vehicles, after all, it is what allows you to see. But not all glass cleaners are created equal. The perfect glass clear goes on thick to remove contaminants but comes off easy without streaking. That perfect glass cleaner is BLACKFIRE Gel Glass Cleaner. BLACKFIRE Gel Glass Cleaner is formulated to be a thick, gel-like viscosity that clings to dirty glass surfaces. Featuring a longer-than-average working time, BLACKFIRE Gel Glass Cleaner breaks down pesky contaminants on contact. The product does the work for you, so that when the time comes all you have to do is wipe away.

Speaking of wiping, the unique formula of BLACKFIRE Gel Glass Cleaner is designed to cut down on potential wiping-induced marring and makes cleaning easier in general. Not only that, but BLACKFIRE Gel Glass Cleaner is non-streaking, so you don't have to worry about that typical glass cleaner turnoff. Don't worry those of you with tinted windows, you can still use BLACKFIRE Gel Glass Cleaner as it doesn't contain any ammonia, so it's safe your tint.

Best of all, BLACKFIRE Gel Glass Cleaner couldn't be easier to use. Simply spray BLACKFIRE Gel Glass Cleaner onto your glass surface and wipe away with a clean, microfiber glass towel. It's best to use a few microfiber glass towels so that you can prevent cross contamination, smearing or any possible streaking.

DIRECTIONS:
-Use only on cool surfaces out of direct sunlight.
-Spray BLACKFIRE Gel Glass Cleaner onto surface.
-Using a clean microfiber glass towel, wipe glass to remove surface contamination.
-Flip to a clean side of your towel and buff away excess product.
-PRO TIP: Using two microfiber glass towels for this step will prevent cross-contamination and ensure no streaking or smearing occurs.

32 oz.
"|"BLACKFIRE Gel Glass Cleaner "|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-gel-glass-cleaner-bundle|BF-770-BUN|CUSTOM-ITEM|"BLACKFIRE Gel Glass Cleaner Bundle"|"https://www.blackfirewax.com/blackfire-gel-glass-cleaner-bundle.html"|(48.96)|(24.99)|T|""|""|""|""|""|" Start cleaning your glass with gel!

The Gel Glass Cleaner Bundle is thick formula that cleans thoroughly and deeply to remove that set-in gunk and grime. It is easy-to- and is non-streaking, especially when used with Speed Master Premium Glass Towels.

Items in this kit:

BLACKFIRE Gel Glass Cleaner
BLACKFIRE Gel Glass Cleaner is a thick formula that clings to glass in a non-streaking formula, that breaks down and removes contaminants. Safe to use on tinted glass, BLACKFIRE Gel Glass Cleaner is ammonia-free. BLACKFIRE Gel Glass Cleaner is easy-to-use, wiping off with ease.

Speed Master Premium Glass Towel
Speed master has long been a trusted name in detailing tools and accessories. They have continued to uphold that legacy with the creation of the Speed Master Premium Glass Towel! The genius diamond flat-weave design of the Speed Master Premium Glass Towel minimizes any streaking or smearing during the cleaning process. This makes sure that even the dirtiest windows and glass can be brought to absolute transparency with ease!

Kit includes
1 32 oz. BLACKFIRE Gel Glass Cleaner
3 16x16"" Speed Master Premium Glass Towel

A total retail value of $48.96. Save $23.97! "|""|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| glass-cleaner-128|BF-430-128|CUSTOM-ITEM|"BLACKFIRE Glass Cleaner 128 oz."|"http://www.blackfirewax.com/glass-cleaner-128.html"|(69.99)||T|"Blackfire Car Care"|""|""|""|""|"Wipe your way to crystal clear glass!

• Powerful, yet gentle formula


• Ammonia free and safe on tint!


• Streak free!

BLACKFIRE Glass Cleaner is your new favorite glass cleaner. Formulated to create crystal clear glass (no streaking here!), and perfectly safe to use on tinted windows, BLACKFIRE Glass Cleaner can be used on more than just your car windows and windshield. Use BLACKFIRE Glass Cleaner on your glass surfaces at home, in your garage, even on your sunglasses!

BLACKFIRE Glass Cleaner boasts a powerful, yet gentle, formula that's perfect for heavily contaminated windows. Smoker's Film is a common problem in vehicles who's owners smoke in them. Not only does Smoker's Film impair your vision and cause major contamination - it's just gross! BLACKFIRE Glass Cleaner easily cuts through this layer of gunk for perfect vision again.

When cleaning exterior glass, spray BLACKFIRE Glass Cleaner directly onto the surface.

Using your Waffle Weave Microfiber Glass Towel, spread the cleaner evenly over the surface.

There's only one thing that's perhaps more head-turning than shiny paint - and that's crystal clear, smudge-free glass. BLACKFIRE Glass Cleaner, especially when used with the Waffle Weave Microfiber Glass Towels, gives you just that. Keep a bottle in your trunk for quick clean-ups at car shows and ensure you never have dirty glass again!

128 oz."|"1 Gallon BLACKFIRE Wet Diamond Glass Cleaner"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| wet-diamond-glass-cleaner|BF-430|CUSTOM-ITEM|"BLACKFIRE Glass Cleaner 32 oz."|"http://www.blackfirewax.com/wet-diamond-glass-cleaner.html"|(21.99)||T|"Blackfire Car Care"|""|""|""|""|"Wipe your way to crystal clear glass!

• Powerful, yet gentle formula


• Ammonia free and safe on tint!


• Streak free!

BLACKFIRE Glass Cleaner is your new favorite glass cleaner. Formulated to create crystal clear glass (no streaking here!), and perfectly safe to use on tinted windows, BLACKFIRE Glass Cleaner can be used on more than just your car windows and windshield. Use BLACKFIRE Glass Cleaner on your glass surfaces at home, in your garage, even on your sunglasses!

BLACKFIRE Glass Cleaner boasts a powerful, yet gentle, formula that's perfect for heavily contaminated windows. Smoker's Film is a common problem in vehicles who's owners smoke in them. Not only does Smoker's Film impair your vision and cause major contamination - it's just gross! BLACKFIRE Glass Cleaner easily cuts through this layer of gunk for perfect vision again.

When cleaning exterior glass, spray BLACKFIRE Glass Cleaner directly onto the surface.

Using your Waffle Weave Microfiber Glass Towel, spread the cleaner evenly over the surface.

There's only one thing that's perhaps more head-turning than shiny paint - and that's crystal clear, smudge-free glass. BLACKFIRE Glass Cleaner, especially when used with the Waffle Weave Microfiber Glass Towels, gives you just that. Keep a bottle in your trunk for quick clean-ups at car shows and ensure you never have dirty glass again!

32 oz."|"BLACKFIRE Glass Cleaner"|""|""|""|""|""|""|"(:GLASS-CLEANER-128)"|""||""|""|""|""|""|""||0|BLACKFIRE Wet Diamond Glass Cleaner bf-430-duo|BF-430-128-P|CUSTOM-ITEM|"BLACKFIRE Glass Cleaner Duo Pack"|"https://www.blackfirewax.com/bf-430-duo.html"|(80.98)|(59.99)|T|""|""|""|""|""|"Wipe your way to crystal clear glass!

• Powerful, yet gentle formula


• Ammonia free and safe on tint!


• Streak free!

BLACKFIRE Glass Cleaner is your new favorite glass cleaner. Formulated to create crystal clear glass (no streaking here!), and perfectly safe to use on tinted windows, BLACKFIRE Glass Cleaner can be used on more than just your car windows and windshield. Use BLACKFIRE Glass Cleaner on your glass surfaces at home, in your garage, even on your sunglasses!

BLACKFIRE Glass Cleaner boasts a powerful, yet gentle, formula that's perfect for heavily contaminated windows. Smoker's Film is a common problem in vehicles who's owners smoke in them. Not only does Smoker's Film impair your vision and cause major contamination - it's just gross! BLACKFIRE Glass Cleaner easily cuts through this layer of gunk for perfect vision again.

When cleaning exterior glass, spray BLACKFIRE Glass Cleaner directly onto the surface.

Using your Waffle Weave Microfiber Glass Towel, spread the cleaner evenly over the surface.

There's only one thing that's perhaps more head-turning than shiny paint - and that's crystal clear, smudge-free glass. BLACKFIRE Glass Cleaner, especially when used with the Waffle Weave Microfiber Glass Towels, gives you just that. Keep a bottle in your trunk for quick clean-ups at car shows and ensure you never have dirty glass again!

32 oz."|"BLACKFIRE Glass Cleaner Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| glass-cleaning-kit|BF-430-KIT|CUSTOM-ITEM|"BLACKFIRE Glass Cleaning Kit"|"http://www.blackfirewax.com/glass-cleaning-kit.html"|(65.95)|(47.99)|T|"Blackfire Car Care"|""|""|""|""|"The BLACKFIRE Glass Cleaning Kit brings you the key tools you need to have crystal clear glass. Use the BLACKFIRE Glass Cleaner to remove dirt, debris, smoker’s film and other contaminants off your glass, all while being ammonia free. The Glass Master Pro Glass and Surface Cleaner is a great tool for reaching those hard to get areas that your arms just can’t reach, plus it has interchangeable bonnets. Finish off any glass cleaning job with the Waffle Weave Microfiber Glass Towels that are super soft with unparalleled absorbency.

The BLACKFIRE Glass Cleaning Kit Includes:

32 oz. BLACKFIRE Glass Cleaner BLACKFIRE Glass Cleaner is a powerful glass cleaner that will gently remove dirt, debris, smoker’s film and other surface contamination from your glass, leaving only a crystal clear finish behind. As BLACKFIRE Glass Cleaner is ammonia free, it is perfectly safe on tinted windows. BLACKFIRE Glass Cleaner is perfect for any glass surface – be it car windows, or your bathroom mirror, even sunglasses, each surface will be left with a completely clean and clear finish.

Glass Master Pro Glass and Surface Cleaner The Glass Master Pro is the perfect tool for the sloping back window. It’s impossible to reach the bottom of the glass without contorting your arm. The long handle of the Glass Master Pro allows you to reach every corner without stretching or straining. The wand is 14” long with a pivoting, wedge-shaped head. An extra head is included. The Glass Master Pro includes three changeable bonnets for versatility - a terry bonnet, a nylon mesh bonnet, and a microfiber bonnet.

3 Pack Waffle Weave Microfiber Glass Towels, 16 x 27 inches With over 220,000 silky fine threads per square inch, the new towel is still super soft with unparalleled absorbency and durability.The superior capacity for moisture eliminates glass streaks better than any other towel. A double-stitched edge and a plush waffle weave round out the features of our best glass cleaning towel to date.

Kit includes:
32 oz. BLACKFIRE Glass Cleaner
Glass Master Pro Glass and Surface Cleaner
3 Pack Waffle Weave Microfiber Glass Towels, 16 x 27 inches

Total retail value of $62.96. You save $12.97!"|"BLACKFIRE Glass Cleaning Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-glass-water-spot-remover|BF-160|CUSTOM-ITEM|"BLACKFIRE Glass Water Spot Remover"|"https://www.blackfirewax.com/bf-glass-water-spot-remover.html"|(24.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Spotless glass is flawless glass!

BLACKFIRE Glass Water Spot Remover easily removes mild to moderate water spots that plague your glass surfaces and ruin the all-around look of your car. BLACKFIRE Glass Water Spot Remover also improves your safety while driving by increasing the clarity of your glass and improving your visibility. You don’t need to by any special tools to use BLACKFIRE Glass Water Spot Remover as it can be applied by hand or machine!

Water spots have long been a terrible annoyance to anyone who puts even the slightest bit of worth in how their car looks. When the goal is to make your car’s surfaces look shiny, it is quite irritating when those surfaces are instead peppered with hundreds of small round mineral deposits, also known as water spots. Not only to they ruin the look of the surface, that are also nearly unavoidable and quite a chore to remove once they are there.

Your glass is especially sensitive to these devious little deposits. They are much more noticeable on a transparent surface AND that transparency is compromised when it is littered water spots, which can cause a safety hazard. For the sake of your car and your safety, BLACKFIRE came out with an easy solution to this treacherous issue. BLACKFIRE Glass Water Spot Remover will make solving your water spots issue easier than you would have guessed.

---

BLACKFIRE Glass Water Spot Remover can be used by hand (generally easier to do on smaller areas) or by machine (perfect for quicker applications) to quickly and effectively remove water spots on your glass without further damage!

---

BLACKFIRE Glass Water Spot Remover uses mild abrasives to gently remove the water spots that have built up on the surface of your car. The abrasives in BLACKFIRE Glass Water Spot Remover are strong enough to tackle mild to moderate water spots, but not so aggressive that they will permanently scratch the surface of your glass.

BLACKFIRE Glass Water Spot Remover will also greatly increase your safety while you are driving as well! You will notice a distinct improvement to the visibility and clarity of your glass after it has been treated with BLACKFIRE Glass Water Spot Remover. This increased visibility allows you to see more clearly while you are driving instead of constantly having your vision impaired by the water spots that populate your windows and windshield. Especially while driving facing the sun.

---

---

Not everybody is equipped with the tools and appliances of a professional detailer, so you may not have access to a polisher or buffer that would allow you to use a standard glass polish effectively. BLACKFIRE Glass Water Spot Remover, however, was designed for easy use either by hand or by machine. This makes BLACKFIRE Glass Water Spot Remover an ideal choice for either the professional detailer or the detailing enthusiast!

Directions:
Hand Application - Apply a quarter-sized drop of product onto a foam or microfiber applicator pad. Working on a 10"" x 10"" area of glass, apply Glass Water Spot Remover using an overlapping, back and forth pattern. After completing a section, immediately wipe off any excess product with a clean and dry microfiber towel. Repeat through each section.

Machine Application - Before starting, tape off any painted areas to avoid splatter. Apply a quarter-sized drop of product onto a light foam polishing pad and apply to a section of glass on medium to high speed. Be sure to use overlapping passes to ensure each inch of glass is treated. Once product turns clear, remove any excess product with a clean microfiber towel and evaluate. Repeat if necessary. Follow through each section of glass using the same technique.

32 oz."|"BLACKFIRE Glass Water Spot Remover"|""|""|""|""|""|""|"(:BF-GLASS-WATER-SPOT-REMOVER-128)"|""||""|""|""|""|""|""||0| bf-glass-water-spot-remover-128|BF-160-128|CUSTOM-ITEM|"BLACKFIRE Glass Water Spot Remover 128 oz."|"https://www.blackfirewax.com/bf-glass-water-spot-remover-128.html"|(87.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Spotless glass is flawless glass!

BLACKFIRE Glass Water Spot Remover easily removes mild to moderate water spots that plague your glass surfaces and ruin the all-around look of your car. BLACKFIRE Glass Water Spot Remover also improves your safety while driving by increasing the clarity of your glass and improving your visibility. You don’t need to by any special tools to use BLACKFIRE Glass Water Spot Remover as it can be applied by hand or machine!

Water spots have long been a terrible annoyance to anyone who puts even the slightest bit of worth in how their car looks. When the goal is to make your car’s surfaces look shiny, it is quite irritating when those surfaces are instead peppered with hundreds of small round mineral deposits, also known as water spots. Not only to they ruin the look of the surface, that are also nearly unavoidable and quite a chore to remove once they are there.

Your glass is especially sensitive to these devious little deposits. They are much more noticeable on a transparent surface AND that transparency is compromised when it is littered water spots, which can cause a safety hazard. For the sake of your car and your safety, BLACKFIRE came out with an easy solution to this treacherous issue. BLACKFIRE Glass Water Spot Remover will make solving your water spots issue easier than you would have guessed.

---

BLACKFIRE Glass Water Spot Remover can be used by hand (generally easier to do on smaller areas) or by machine (perfect for quicker applications) to quickly and effectively remove water spots on your glass without further damage!

---

BLACKFIRE Glass Water Spot Remover uses mild abrasives to gently remove the water spots that have built up on the surface of your car. The abrasives in BLACKFIRE Glass Water Spot Remover are strong enough to tackle mild to moderate water spots, but not so aggressive that they will permanently scratch the surface of your glass.

BLACKFIRE Glass Water Spot Remover will also greatly increase your safety while you are driving as well! You will notice a distinct improvement to the visibility and clarity of your glass after it has been treated with BLACKFIRE Glass Water Spot Remover. This increased visibility allows you to see more clearly while you are driving instead of constantly having your vision impaired by the water spots that populate your windows and windshield. Especially while driving facing the sun.

---

---

Not everybody is equipped with the tools and appliances of a professional detailer, so you may not have access to a polisher or buffer that would allow you to use a standard glass polish effectively. BLACKFIRE Glass Water Spot Remover, however, was designed for easy use either by hand or by machine. This makes BLACKFIRE Glass Water Spot Remover an ideal choice for either the professional detailer or the detailing enthusiast!

Directions:
Hand Application - Apply a quarter-sized drop of product onto a foam or microfiber applicator pad. Working on a 10"" x 10"" area of glass, apply Glass Water Spot Remover using an overlapping, back and forth pattern. After completing a section, immediately wipe off any excess product with a clean and dry microfiber towel. Repeat through each section.

Machine Application - Before starting, tape off any painted areas to avoid splatter. Apply a quarter-sized drop of product onto a light foam polishing pad and apply to a section of glass on medium to high speed. Be sure to use overlapping passes to ensure each inch of glass is treated. Once product turns clear, remove any excess product with a clean microfiber towel and evaluate. Repeat if necessary. Follow through each section of glass using the same technique.

128 oz."|"BLACKFIRE Glass Water Spot Remover 128 oz."|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-glass-water-spot-remover-duo|BF-160-128-P|CUSTOM-ITEM|"BLACKFIRE Glass Water Spot Remover Duo Pack"|"https://www.blackfirewax.com/bf-glass-water-spot-remover-duo.html"|(94.98)|(69.99)|T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Spotless glass is flawless glass!

BLACKFIRE Glass Water Spot Remover easily removes mild to moderate water spots that plague your glass surfaces and ruin the all-around look of your car. BLACKFIRE Glass Water Spot Remover also improves your safety while driving by increasing the clarity of your glass and improving your visibility. You don’t need to by any special tools to use BLACKFIRE Glass Water Spot Remover as it can be applied by hand or machine!

Water spots have long been a terrible annoyance to anyone who puts even the slightest bit of worth in how their car looks. When the goal is to make your car’s surfaces look shiny, it is quite irritating when those surfaces are instead peppered with hundreds of small round mineral deposits, also known as water spots. Not only to they ruin the look of the surface, that are also nearly unavoidable and quite a chore to remove once they are there.

Your glass is especially sensitive to these devious little deposits. They are much more noticeable on a transparent surface AND that transparency is compromised when it is littered water spots, which can cause a safety hazard. For the sake of your car and your safety, BLACKFIRE came out with an easy solution to this treacherous issue. BLACKFIRE Glass Water Spot Remover will make solving your water spots issue easier than you would have guessed.

---

BLACKFIRE Glass Water Spot Remover can be used by hand (generally easier to do on smaller areas) or by machine (perfect for quicker applications) to quickly and effectively remove water spots on your glass without further damage!

---

BLACKFIRE Glass Water Spot Remover uses mild abrasives to gently remove the water spots that have built up on the surface of your car. The abrasives in BLACKFIRE Glass Water Spot Remover are strong enough to tackle mild to moderate water spots, but not so aggressive that they will permanently scratch the surface of your glass.

BLACKFIRE Glass Water Spot Remover will also greatly increase your safety while you are driving as well! You will notice a distinct improvement to the visibility and clarity of your glass after it has been treated with BLACKFIRE Glass Water Spot Remover. This increased visibility allows you to see more clearly while you are driving instead of constantly having your vision impaired by the water spots that populate your windows and windshield. Especially while driving facing the sun.

---

---

Not everybody is equipped with the tools and appliances of a professional detailer, so you may not have access to a polisher or buffer that would allow you to use a standard glass polish effectively. BLACKFIRE Glass Water Spot Remover, however, was designed for easy use either by hand or by machine. This makes BLACKFIRE Glass Water Spot Remover an ideal choice for either the professional detailer or the detailing enthusiast!

Directions:
Hand Application - Apply a quarter-sized drop of product onto a foam or microfiber applicator pad. Working on a 10"" x 10"" area of glass, apply Glass Water Spot Remover using an overlapping, back and forth pattern. After completing a section, immediately wipe off any excess product with a clean and dry microfiber towel. Repeat through each section.

Machine Application - Before starting, tape off any painted areas to avoid splatter. Apply a quarter-sized drop of product onto a light foam polishing pad and apply to a section of glass on medium to high speed. Be sure to use overlapping passes to ensure each inch of glass is treated. Once product turns clear, remove any excess product with a clean microfiber towel and evaluate. Repeat if necessary. Follow through each section of glass using the same technique.

"|"BLACKFIRE Glass Water Spot Remover Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-glass-coating|BF-435-SET|CUSTOM-ITEM|"BLACKFIRE GLASSPRO Coating System"|"https://www.blackfirewax.com/blackfire-glass-coating.html"|(69.99)||T|""|""|""|""|""|"Two parts for long-lasting ceramic glass coating!

BLACKFIRE GLASSPRO Coating System is a two-part product that is formulated to be a long-lasting ceramic glass coating. Only taking minutes to apply, BLACKFIRE GLASSPRO Coating System will protect your glass for up to one year. BLACKFIRE GLASSPRO Coating System creates a super hydrophobic surface, allowing for a clear line of vision.

As much as your eyes may be the window to the soul, your glass is very much so the window to the road. If you have a dirty windshield, you are asking for trouble. For safe driving, you need a clear line of vision, something you can only achieve with top-notch glass products.

BLACKFIRE GLASSPRO Coating System is a unique two-part ceramic glass coating system that allows for maximum effectiveness on your glass. Part I starts with basically applying a base layer. This layer will create cross-links that act like grappling points, allowing the product to fully bond to the glass surface. Next, when you apply Part II, this product will cling to the surface with its hydrophobic properties. Water and environmental contaminants will bead up and roll off more than ever before. This is because the BLACKFIRE GLASSPRO Coating System produces a low sliding angle that keeps these contaminants, such as, water, mud, sleet, and snow from sticking to the surface.

It is important to have clear glass to see through, so that you can drive more safely on the roads. To ensure this, it is critical that you follow all the steps to the BLACKFIRE GLASSPRO Coating System. First, it is recommended that you clean the glass with BLACKFIRE Glass Cleaner. Next, clay your glass with the BLACKFIRE Poly Clay and then polish the glass with BLACKFIRE Glass Water Spot Remover. These first three products together will completely rid your car of contaminants. Before you get to the BLACKFIRE GLASSPRO Coating System, prep the glass with BLACKFIRE Paint Prep to remove any lingering polishing oils and to get it ready for a properly bonded ceramic coating.

To apply BLACKFIRE GLASSPRO Coating System, you will work in two parts. First, saturate a foam applicator with Part I and apply it your glass surface in a crosshatch pattern. The product will flash (appear as a rainbow) within thirty seconds to one minute. Once that happens, you can now saturate a new foam applicator with Part II. Don’t wipe off Part I and instead, put Part II right on top and apply it to the surface in another crosshatch pattern. Finally, wipe any excess product away using a clean microfiber towel. No need to wait, your glass is good to go! Your glass will thank you for its new found clarity as the BLACKFIRE GLASSPRO Coating System will last you up to one year of hydrophobic greatness. It's best to apply Part II every three to four months for best results.

DIRECTIONS:

Ready the surface:
-First clean the surface to be coated with BLACKFIRE Glass Cleaner.
-It’s also recommended that the glass be clayed using BLACKFIRE Poly Clay and then polished with BLACKFIRE Glass Water Spot Remover. This fully removes all glass contamination.
-Then prepare the glass for coating with BLACKFIRE Paint Prep to remove any remaining polishing oils.
PRO TIP: If coating the windshield, it will be easier to work on one half of the glass at a time. If working on windows, you can do the whole surface at once.

Part I:
-Saturate a foam coating applicator with BLACKFIRE GLASSPRO Coating System Part I. -Wipe onto the surface using a crosshatch pattern -Immediately move on to the application of Part II - do not allow Part I to dry.

Part II:
-Saturate a new foam coating applicator with BLACKFIRE GLASSPRO Coating System Part II -Without wiping off Part I, apply to the surface using a crosshatch pattern over Part II. -Once complete, wipe excess product away using a clean microfiber buffing towel. -Important Info: Allowing Part I to dry before application of Part II may cause coating to fail. It's best to work on small sections of glass at a time to prevent this from occurring. -No curing time is necessary – your glass will be coated and ready to go immediately! -Reapply Part II every 3-4 months for best results. Both I & II are 30 ml. "|"BLACKFIRE GLASSPRO Coating System"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| gpi-combo|BF-GPI-CMB|CUSTOM-ITEM|"BLACKFIRE GPI Combo"|"https://www.blackfirewax.com/gpi-combo.html"|(111.91)|(74.99)|T|""|""|""|""|""|" Take care of your glass, paint and interior in one kit!

The BLACKFIRE GPI Combo works to keep your glass, paint and interior looking great with only a few kits. BLACKFIRE Gel Glass Cleaner is a thick formula that breaks down contaminants, all without streaking, keeping your class crystal clear. This product is perfectly paired with the Speed Master Premium Glass Towel. BLACKFIRE Instant Detailer will quickly and easily give your exterior paint a boost of shine to revitalize the look. Get your interior up to par with the quick and easy clean of BLACKFIRE Interior Detailer. Plus, you have both the Cobra Supreme 530 Microfiber Towel and the Cobra Storm Gray Edgeless Microfiber Polishing Cloth to wipe away any remaining residue.

Items in this kit:

BLACKFIRE Gel Glass Cleaner
BLACKFIRE Gel Glass Cleaner is a thick formula that clings to glass in a non-streaking formula, that breaks down and removes contaminants. Safe to use on tinted glass, BLACKFIRE Gel Glass Cleaner is ammonia-free. BLACKFIRE Gel Glass Cleaner is easy-to-use, wiping off with ease.

BLACKFIRE Instant Detailer
BLACKFIRE Instant Detail is a supercharged blend of Ivory Carnuaba Wax, Wet Diamond polymers, and high lubricity cleaners. This shine-boosting detail spray instantly revives a dull finish and reactivates existing wax. BLACKFIRE Instant Detailer looks best over Midnight Sun Paste Wax but it is compatible with all waxes. Use this incredible spray to maintain BLACKFIRE's trademark “Wet Ice Over Fire” shine or over your favorite wax or sealant.

BLACKFIRE Interior Detailer
BLACKFIRE Interior Detailer is a quick cleaning and quick protecting interior product designed to save you both time and money. BLACKFIRE Interior Detailer is not meant to replace your standard two-step cleaning and protecting routine, it’s simply used when your interior needs a little sprucing up! BLACKFIRE Interior Detailer will remove dust, fingerprints, and smudges from interior surfaces and leaves behind a low sheen, clean finish that will protect against UV rays – after just one use!

Cobra Storm Gray Edgeless Microfiber Polishing Cloths
The Storm Gray Edgeless Microfiber Polishing Cloth is woven specifically for wax and polish removal. It has a soft touch that is extra gentle on sensitive clear coat finishes. Plus, the cloth has no edges, making accidental scratches virtually impossible. Use this cloth the next time you wax your vehicle and I promise you’ll never use anything else!

Speed Master Premium Glass Towel
Speed master has long been a trusted name in detailing tools and accessories. They have continued to uphold that legacy with the creation of the Speed Master Premium Glass Towel! The genius diamond flat-weave design of the Speed Master Premium Glass Towel minimizes any streaking or smearing during the cleaning process. This makes sure that even the dirtiest windows and glass can be brought to absolute transparency with ease!

Cobra Supreme 530 Microfiber Towel
The Supreme 530 Microfiber Towel weighs in at a formidable 530 g/m2, which tips the scale as one of our thickest, most densely woven microfiber towels. Made of plush ultra microfiber, the Supreme 530 Microfiber Towel boasts a luxurious 75/25 blend of polyester and polyamide. Buff away waxes, wipe away glass cleaners, safely apply quick detailers- the Supreme 530 Microfiber Towel does it all!

Kit includes
1 32 oz. BLACKFIRE Gel Glass Cleaner
32 oz. BLACKFIRE Instant Detailer
32 oz. BLACKFIRE Interior Detailer
2 16x16"" Speed Master Premium Glass Towel
2 16x16"" Cobra Supreme 530 Microfiber Towel, 16 x 16 inches
2 16x16"" Cobra Storm Gray Edgeless Microfiber Polishing Cloth

A total retail value of $111.91. Save $36.92! "|""|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-half-gallon-foam-gun|BF-75HG|CUSTOM-ITEM|"BLACKFIRE Half Gallon Foamaster Foam Gun"|"http://www.blackfirewax.com/blackfire-half-gallon-foam-gun.html"|(73.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

Foamaster Foam Wash Guns are the ideal aid to reduce the chance of creating unsightly swirl marks when you wash your car. Foamaster Foam Wash Guns cover your paint in a frothy foam which helps encapsulate standing dirt, allowing it flow off the paint with a minimal risk of scratching. As you work your way down and around the vehicle with a mitt or sponge, you don’t have to use as much force to remove dirt and debris. It’s already loose and just needs slight agitation to release it from the paint surface.

Add the Foamaster Foam Wash Gun to your current wash regime by pre-soaking your vehicle in foam prior to washing. Alternatively, you can use Foamaster Foam Wash Gun to wash your car by laying down a thick layer of foam in the path of your wash mitt or sponge. Used either way, the Foamaster Foam Wash Gun reduces the risk of scuffing your paint or creating swirl marks.

The Foamaster Foam Wash Gun is available in both quart and half gallon sizes, with a variety of brand logos. The high-quality brass fittings and chemical-resistant reservoir mean the Foamaster Foam Wash Gun is built to last. A quick-connect quickly detaches the Foamaster from the included spray nozzle so you can quickly rinse away your suds.

---

"|"Blackfire Half Gallon Foamaster Foam Gun"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-hobbyist-detailer-kit|GR-BF-HOB-KIT|CUSTOM-ITEM|"Blackfire Hobbyist Detailer Kit"|"https://www.blackfirewax.com/bf-hobbyist-detailer-kit.html"|(277.88)|(229.99)|T|""|""|""|""|""|"A kit for the hobbyist in all of us!

For those of you who don’t necessarily detail for a living, but have love keeping your cars looking great, then the BLACKFIRE Hobbyist Kit is for you! The Griot’s Garage G8 Mini Random Orbital Polisher is the convenient, compact and powerful polisher that everyone could use, fitting in perfectly to those niche areas on your car. Keep your car clean and ready for future detailing steps with the high lubricity and soapy goodness of the BLACFKIRE Car Wash. Use it with the Supreme Micro-Chenille Wash Mitt for an easy wash without scratching. BLACKFIRE One Step does it all in one bottle! Most importantly it removes light swirls and enhances paint color, all while being easy to use. Remove all lingering contaminants from your surface before any big detailing step with the BLACKFIRE Clay Mitt. Simply run the clay side of the mitt (along with some lubricant), across your car for contaminant grabbing action. The 3 x 3.5” CCS Spot Buff White Pad works well with the Griot’s Garage G8 Mini Random Orbital polisher, as it is good for any polishing job. Can’t forget towels! Storm Gray Edgeless Microfiber Polishing Cloth are perfect for polishing and lack of edgeless makes it impossible to create scratches.

Items in this kit:

Griot’s Garage G8 Mini Random Orbital Polisher

Looking for a quick and versatile polishing tool that can make its way to those hard-to-reach panels? Look no further than the Griot’s Garage G8 Random Orbital Polisher. The Griot’s Garage G8 Random Orbital Polisher has a small frame that easily fits into those niche areas, as well as, the uniquely contoured panels. With the Griot’s Garage G8 Random Orbital Polisher you get an increase in watt power and an increase in orbit. Conveniently, the Griot’s Garage G8 Random Orbital Polisher comes with 2” and 3” backing plates and a quick connect rubber power cord.

Car Wash

BLACKFIRE Car Wash cleans your vehicle and renews the shine every time you wash your car. BLACKFIRE's tri-polymers replenish and reinforce existing paint protection. Incredible Tuff Suds II technology creates mountains of suds to help float away grime and dirt, without scratching the finish. Drying agents help reduce water spotting and make drying easier. BLACKFIRE Car Wash helps your vehicle look just waxed after every wash!

BLACKFIRE One Step

BLACKFIRE One Step is an all-in-one product that will remove light swirls and paint dullness from your paint while also laying down an intense, high-grade paint sealant onto the surface. A genuine one step product, BLACKFIRE One Step is perfect for professional detailers looking to enhance their service selection, as well as the DIY enthusiast that wants high-performing product that isn’t complicated. BLACKFIRE One Step is here to change the paint perfecting game – and it’s already performing!

BLACKFIRE Clay Mitt

BLACKFIRE Clay Mitt is a specialized wash mitt that uses an advanced rubberized material to safely remove embedded contaminants in your paint. This synthetic coating works the way a traditional clay bar does, but with a lot less mess! BLACKFIRE Clay Mitt will safely remove over-spray, road grime, dirt, industrial fall-out, tree sap and more with just one pass! Engineered as a two-in-one tool, the BLACKFIRE Clay Mitt works as both a wash mitt AND a method of decontamination!

3 x 3.5” CCS Spot Buff White Pad

This pad features high absorption foam for the application of waxes, polishes and sealants. This pad has very little cutting power and works well for application purposes. It’s made of soft, porous foam so it’s gentle on your paint. They’re also perfect for polishing metal wheels, bumpers, and mirror covers.

Supreme Micro-Chenille Wash Mitt

Our Supreme Micro-Chenille Wash Mitt has 40% larger microfiber fingers than our standard micro-chenille wash mitts! This wash mitt has all the paint-pampering features of the original mitt plus superior durability and a larger size. The Supreme Micro-Chenille Wash Mitt lathers your vehicle in suds for a safe, swirl-free wash!

Cobra Supreme Guzzler Waffle Weave Drying Towel

The Supreme Guzzler is 20% thicker than the original towel to give it an even greater capacity for moisture. At approximately 5.5 square feet, this waffle weave towel can dry most small cars without being rung out once! As you may well know, microfiber is made of two synthetic fibers: polyester and polyamide. Polyester accounts for the towel's durability and polishing properties while polyamide is silky soft. The plush 80/20 weave of the two fibers allow the towel to hold a tremendous amount of water; seven times its own weight!

Storm Gray Edgeless Microfiber Polishing Cloth

The Storm Gray Edgeless Microfiber Polishing Cloth is woven specifically for wax and polish removal. It has a soft touch that is extra gentle on sensitive clear coat finishes. Plus, the cloth has no edges, making accidental scratches virtually impossible. Use this cloth the next time you wax your vehicle and I promise you’ll never use anything else!

Kit includes

1 Griot's G8 Mini Random Orbital Polisher
1 32 oz. BLACKFIRE One Step
1 32 oz. BLACKFIRE Car Wash
1 BLACKFIRE Clay Mitt
3 x 3.5” CCS Spot Buff White Pad
1 Supreme Micro-Chenille Wash Mitt
2 20” x 40” Cobra Supreme Guzzler Waffle Weave Drying Towel
3 16” x 16” Storm Gray Microfiber Polishing Cloth

A total retail value of $277.88. Save $47.89! "|"Blackfire Hobbyist Detailer Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| ready-to-use-hydroseal-128|BF-610-128|CUSTOM-ITEM|"Blackfire HydroSeal 128 oz."|"https://www.blackfirewax.com/ready-to-use-hydroseal-128.html"|(79.99)||T|""|""|""|""|""|" Incredible protection, quick application!

Blackfire HydroSeal is an expertly formulated product designed to make applying durable SiO2 protection to your paint easier than it has ever been. A simple spray and rinse application means you can apply Blackfire HydroSeal to your entire paint surface in mere minutes! Blackfire HydroSeal will cause water to bead up, greatly reducing the risk of water-spots and mineral deposits!

We all love a nice-looking car that is well protected, but with how busy our days are, no one has time to spend hour applying a wax or sealant. Most waxes or sealants require you to spend hours slowly working your way around your car applying the product section by section. You have to be careful to ensure that the application is smooth, thin, and consistent or you will end up with paint that looks magnificent in some areas and hazy in others.

Blackfire HydroSeal take all the guess work and almost all of the time out of the process of protecting your paint. In fact, it turns the hours of careful wax application into a mere extra few minutes after your weekly car wash. All it takes to apply this incredible product is to simply spray it directly onto the surface and quickly rinse it away. It doesn’t get any easier than that!

Now, being quick to apply doesn’t amount to much at all if it only provides protection a day or two. Thanks to the SiO2 in the formula for Blackfire HydroSeal, the protection it provides can even outlast waxes! One of the biggest risks and annoyances to your paint is water and the minerals and dirt that it brings along with it. This is because water that finds its way onto your paint is almost never just water. This water is filled with minerals, contaminants, and dirt. Once the water evaporates, this debris is left to sit on your paint surface, etching away at your clear coat and ruin your paint’s gloss. Blackfire HydroSeal can easily prevent your paint from suffering from these contaminants!

Spending a few minutes to apply Blackfire HydroSeal provides your paint with immense hydrophobic properites. Water will bead-up on your paint instead of spreading out over the surface, depositing minerals and contamination. Blackfire HydroSeal relieves any worry about water-spots or mineral deposits!

If you, like all of us, are looking for a way to protect you paint without having to devote your entire weekend to the cause, Blackfire HydroSeal is the product for you!

Directions: Dilute accordingly. Wash entire vehicle but do NOT dry - HydroSeal is applied to wet surfaces! After rinsing away your car wash, simply spray HydroSeal directly onto the surface to be treated and immediately rinse away with your hose using a strong jet of water. Continue around the vehicle working one panel at a time. Following best practices, be sure to dry once completed.

128 oz. "|"Blackfire HydroSeal 128 oz."|""|""|""|""|""|""|"(:READY-TO-USE-HYDROSEAL-5G)"|""||""|""|""|""|""|""||0| ready-to-use-hydroseal|BF-610|CUSTOM-ITEM|"Blackfire HydroSeal 32 oz."|"https://www.blackfirewax.com/ready-to-use-hydroseal.html"|(37.99)||T|""|""|""|""|""|"Incredible protection, unbelievably quick application!

Blackfire HydroSeal is an expertly formulated product designed to make applying durable SiO2 protection to your paint easier than it has ever been. A simple spray and rinse application means you can apply Blackfire HydroSeal to your entire paint surface in mere minutes! Blackfire HydroSeal will cause water to bead up, greatly reducing the risk of water-spots and mineral deposits!

We all love a nice-looking car that is well protected, but with how busy our days are, no one has time to spend hour applying a wax or sealant. Most waxes or sealants require you to spend hours slowly working your way around your car applying the product section by section. You have to be careful to ensure that the application is smooth, thin, and consistent or you will end up with paint that looks magnificent in some areas and hazy in others. Blackfire HydroSeal take all the guess work and almost all of the time out of the process of protecting your paint. In fact, it turns the hours of careful wax application into a mere extra few minutes after your weekly car wash. All it takes to apply this incredible product is to simply spray it directly onto the surface and quickly rinse it away. It doesn’t get any easier than that!

Now, being quick to apply doesn’t amount to much at all if it only provides protection a day or two. Thanks to the SiO2 in the formula for Blackfire HydroSeal, the protection it provides can even outlast waxes! One of the biggest risks and annoyances to your paint is water and the minerals and dirt that it brings along with it. This is because water that finds its way onto your paint is almost never just water. This water is filled with minerals, contaminants, and dirt. Once the water evaporates, this debris is left to sit on your paint surface, etching away at your clear coat and ruin your paint’s gloss. Blackfire HydroSeal can easily prevent your paint from suffering from these contaminants!

Spending a few minutes to apply Blackfire HydroSeal provides your paint with immense hydrophobic properites. Water will bead-up on your paint instead of spreading out over the surface, depositing minerals and contamination. Blackfire HydroSeal relieves any worry about water-spots or mineral deposits!

If you, like all of us, are looking for a way to protect you paint without having to devote your entire weekend to the cause, Blackfire HydroSeal is the product for you!

Directions:
Dilute accordingly. Wash entire vehicle but do NOT dry - HydroSeal is applied to wet surfaces! After rinsing away your car wash, simply spray HydroSeal directly onto the surface to be treated and immediately rinse away with your hose using a strong jet of water. Continue around the vehicle working one panel at a time. Following best practices, be sure to dry once completed.

32 oz. "|"Blackfire HydroSeal 32 oz."|""|""|""|""|""|""|"(:READY-TO-USE-HYDROSEAL-128 :READY-TO-USE-HYDROSEAL-5G)"|""||""|""|""|""|""|""||0| ready-to-use-hydroseal-5g|BF-610-5G|CUSTOM-ITEM|"BLACKFIRE HydroSeal 5 Gallon"|"https://www.blackfirewax.com/ready-to-use-hydroseal-5g.html"|(299.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Incredible protection, unbelievably quick application!

BLACKFIRE HydroSeal is an expertly formulated product designed to make applying durable SiO2 protection to your paint easier than it has ever been. A simple spray and rinse application means you can apply BLACKFIRE HydroSeal to your entire paint surface in mere minutes! BLACKFIRE HydroSeal will cause water to bead up, greatly reducing the risk of water-spots and mineral deposits!

We all love a nice-looking car that is well protected, but with how busy our days are, no one has time to spend hour applying a wax or sealant. Most waxes or sealants require you to spend hours slowly working your way around your car applying the product section by section. You have to be careful to ensure that the application is smooth, thin, and consistent or you will end up with paint that looks magnificent in some areas and hazy in others. BLACKFIRE HydroSeal take all the guess work and almost all of the time out of the process of protecting your paint. In fact, it turns the hours of careful wax application into a mere extra few minutes after your weekly car wash. All it takes to apply this incredible product is to simply spray it directly onto the surface and quickly rinse it away. It doesn’t get any easier than that!

Now, being quick to apply doesn’t amount to much at all if it only provides protection a day or two. Thanks to the SiO2 in the formula for BLACKFIRE HydroSeal, the protection it provides can even outlast waxes! One of the biggest risks and annoyances to your paint is water and the minerals and dirt that it brings along with it. This is because water that finds its way onto your paint is almost never just water. This water is filled with minerals, contaminants, and dirt. Once the water evaporates, this debris is left to sit on your paint surface, etching away at your clear coat and ruin your paint’s gloss. BLACKFIRE HydroSeal can easily prevent your paint from suffering from these contaminants!

Spending a few minutes to apply BLACKFIRE HydroSeal provides your paint with immense hydrophobic properties. Water will bead-up on your paint instead of spreading out over the surface, depositing minerals and contamination. BLACKFIRE HydroSeal relieves any worry about water-spots or mineral deposits!

If you, like all of us, are looking for a way to protect you paint without having to devote your entire weekend to the cause, BLACKFIRE HydroSeal is the product for you!

Directions:
Dilute accordingly. Wash entire vehicle but do NOT dry - HydroSeal is applied to wet surfaces! After rinsing away your car wash, simply spray HydroSeal directly onto the surface to be treated and immediately rinse away with your hose using a strong jet of water. Continue around the vehicle working one panel at a time. Following best practices, be sure to dry once completed.

5 gallons (640 oz.) "|"BLACKFIRE HydroSeal 5 Gallon"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-600-spr-kit|BF-600-SPR-KIT|CUSTOM-ITEM|"BLACKFIRE HydroSeal Concentrate & Wash Kit"|"https://www.blackfirewax.com/bf-600-spr-kit.html"|(85.95)|(69.99)|T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"This kit has you covered from the wash, to the seal, to the drying!

The BLACKFIRE HydroSeal Concentrate & Wash Kit (traditional) allows you to take your car from dirty to dashing! You’ll get every tool and product that you will need to provide a thorough wash and a high-quality level of HydroSeal protection to your car! You’ll save a good chunk of change by buying all these tools in a money-saving kit like this. And you’ll love the results for months to come!

This kit includes:

BLACKFIRE HydroSeal Concentrate 4 oz.
Blackfire HydroSeal is already such an incredible product, the only way it could be made better is to make it even more affordable than it already is! Blackfire HydroSeal Concentrate gives both the professional detailer and detailing enthusiast the ideal protection at the ideal price! With a dilution ratio of 1:7, a mere 4 oz. of Blackfire HydroSeal Concentrate can give up a full 32 oz. of pure SiO2 protection! Blackfire HydroSeal is an expertly formulated product designed to make applying durable SiO2 protection to your paint easier than it has ever been. A simple spray and rinse application means you can provide intense hydrophobic properties to your entire paint surface in mere minutes!

BLACKFIRE Car Wash 32 oz.
BLACKFIRE Car Wash cleans your vehicle and renews the shine every time you wash your car. BLACKFIRE's tri-polymers replenish and reinforce existing paint protection. Incredible Tuff Suds II technology creates mountains of suds to help float away grime and dirt, without scratching the finish. Drying agents help reduce water spotting and make drying easier. BLACKFIRE Car Wash helps your vehicle look just waxed after every wash!

36 Ounce Detail Bottle
For the serious detailer, we now have a heavy-duty spray trigger bottle. You can use it to spray both interior and exterior detail chemicals when cleaning your car. This bottle is also useful around the house and yard. The 36 ounce bottle is constructed of PVC for extra durability.

Supreme Micro-Chenille Wash Mitt
Our Supreme Micro-Chenille Wash Mitt has 40% larger microfiber fingers than our standard micro-chenille wash mitts! This wash mitt has all the paint-pampering features of the original mitt plus superior durability and a larger size. The Supreme Micro-Chenille Wash Mitt lathers your vehicle in suds for a safe, swirl-free wash!

The Supreme Guzzler Waffle Weave By Cobra, 20 x 40 inches
The Supreme Guzzler is 20% thicker than the original towel to give it an even greater capacity for moisture. At approximately 5.5 square feet, this waffle weave towel can dry most small cars without being rung out once! As you may well know, microfiber is made of two synthetic fibers: polyester and polyamide. Polyester accounts for the towel's durability and polishing properties while polyamide is silky soft. The plush 80/20 weave of the two fibers allow the towel to hold a tremendous amount of water; seven times its own weight!

A retail value of $85.95. You save $15.96!


Federal regulations prohibit the shipment of this products by air, UPS 3 Day, UPS 2, or US Mail. This item is shipped by UPS Ground only. Sorry but no APO or FPO addresses.
"|"BLACKFIRE HydroSeal Concentrate & Wash Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-600-pres-spr-kit|BF-600-PRESSPR-KIT|CUSTOM-ITEM|"BLACKFIRE HydroSeal Concentrate & Wash Kit with Pressure Sprayer"|"https://www.blackfirewax.com/bf-600-pres-spr-kit.html"|(95.95)|(79.99)|T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"This kit has you covered from the wash, to the seal, to the drying!

The BLACKFIRE HydroSeal Concentrate & Wash Kit (pressurized) allows you to take your car from dirty to dashing! You’ll get every tool and product that you will need to provide a thorough wash and a high-quality level of HydroSeal protection to your car! You’ll save a good chunk of change by buying all these tools in a money-saving kit like this. And you’ll love the results for months to come! And with this kit, you’ll even get a pressurized sprayer to save you the pain and time of a traditional spray bottle!

This kit includes:

BLACKFIRE HydroSeal Concentrate 4 oz.
Blackfire HydroSeal is already such an incredible product, the only way it could be made better is to make it even more affordable than it already is! Blackfire HydroSeal Concentrate gives both the professional detailer and detailing enthusiast the ideal protection at the ideal price! With a dilution ratio of 1:7, a mere 4 oz. of Blackfire HydroSeal Concentrate can give up a full 32 oz. of pure SiO2 protection! Blackfire HydroSeal is an expertly formulated product designed to make applying durable SiO2 protection to your paint easier than it has ever been. A simple spray and rinse application means you can provide intense hydrophobic properties to your entire paint surface in mere minutes!

BLACKFIRE Car Wash 32 oz.
BLACKFIRE Car Wash cleans your vehicle and renews the shine every time you wash your car. BLACKFIRE's tri-polymers replenish and reinforce existing paint protection. Incredible Tuff Suds II technology creates mountains of suds to help float away grime and dirt, without scratching the finish. Drying agents help reduce water spotting and make drying easier. BLACKFIRE Car Wash helps your vehicle look just waxed after every wash!

BLACKFIRE Chemical Resistant Pressure Sprayer
Spray wheel cleaners, all purpose cleaners, and more with the BLACKFIRE Chemical Resistant Pressure Sprayer. This compact pump sprayer delivers detailing chemicals to auto surfaces with an effortless continuous spray feature. The BLACKFIRE Chemical Resistant Pressure Sprayer is excellent for diluted concentrates and strong cleaners and degreasers. Make any detailing job easier.

Supreme Micro-Chenille Wash Mitt
Our Supreme Micro-Chenille Wash Mitt has 40% larger microfiber fingers than our standard micro-chenille wash mitts! This wash mitt has all the paint-pampering features of the original mitt plus superior durability and a larger size. The Supreme Micro-Chenille Wash Mitt lathers your vehicle in suds for a safe, swirl-free wash!

The Supreme Guzzler Waffle Weave By Cobra, 20 x 40 inches
The Supreme Guzzler is 20% thicker than the original towel to give it an even greater capacity for moisture. At approximately 5.5 square feet, this waffle weave towel can dry most small cars without being rung out once! As you may well know, microfiber is made of two synthetic fibers: polyester and polyamide. Polyester accounts for the towel's durability and polishing properties while polyamide is silky soft. The plush 80/20 weave of the two fibers allow the towel to hold a tremendous amount of water; seven times its own weight!

A retail value of $95.95. You save $15.96!


Federal regulations prohibit the shipment of this products by air, UPS 3 Day, UPS 2, or US Mail. This item is shipped by UPS Ground only. Sorry but no APO or FPO addresses.
"|"BLACKFIRE HydroSeal Concentrate & Wash Kit with Pressure Sprayer"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| hydroseal-concentrate-4|BF-600-4|CUSTOM-ITEM|"BLACKFIRE HydroSeal Concentrate 4 oz."|"https://www.blackfirewax.com/hydroseal-concentrate-4.html"|(21.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Better protection at an even better price!

BLACKFIRE HydroSeal Concentrate is already such an incredible product, the only way it could be made better is to make it even more affordable than it already is! BLACKFIRE HydroSeal Concentrate gives both the professional detailer and detailing enthusiast the ideal protection at the ideal price! With a dilution ratio of 1:7, a mere 4 oz. of BLACKFIRE HydroSeal Concentrate can give up a full 32 oz. of pure SiO2 protection! BLACKFIRE HydroSeal Concentrate is an expertly formulated product designed to make applying durable SiO2 protection to your paint easier than it has ever been. A simple spray and rinse application means you can provide intense hydrophobic properties to your entire paint surface in mere minutes!

---

---

We all love a nice-looking car that is well protected, but with how busy our days are, no one has time to spend hour applying a wax or sealant. Most waxes or sealants require you to spend hours slowly working your way around your car applying the product section by section. You have to be careful to ensure that the application is smooth, thin, and consistent or you will end up with paint that looks magnificent in some areas and hazy in others.

BLACKFIRE HydroSeal Concentrate take all the guess work and almost all of the time out of the process of protecting your paint. In fact, it turns the hours of careful wax application into a mere extra few minutes after your weekly car wash. All it takes to apply this incredible product is to simply spray it directly onto the surface and quickly rinse it away. It doesn’t get any easier than that!

---

BLACKFIRE HydroSeal Concentrate is easily applied. First, rinse off your vehicle.

---

Now, being quick to apply doesn’t amount to much at all if it only provides protection a day or two. Thanks to the SiO2 in the formula for BLACKFIRE HydroSeal Concentrate, the protection it provides can even outlast waxes!

Spending a few minutes to apply BLACKFIRE HydroSeal Concentrate provides your paint with immense hydrophobic properties. Water will bead-up on your paint instead of spreading out over the surface, depositing minerals and contamination. BLACKFIRE HydroSeal Concentrate relieves any worry about water-spots or mineral deposits!

---

Spray HydroSeal on, then rinse off!

---

BLACKFIRE HydroSeal Concentrate even saves you money! The 1:7 dilution ratio means you’ll be able to produce up to 32 oz. of working product with a small 4 oz. bottle. Now you have no excuse to bother with traditional waxes or sealants, welcome to the future of detailing!

Directions for Use:
Dilute accordingly.
Wash entire vehicle but do NOT dry - HydroSeal Concentrate is applied to wet surfaces!
After rinsing away your car wash, simply spray HydroSeal Concentrate directly onto the surface to be treated and immediately rinse away with your hose using a strong jet of water.
Continue around the vehicle working one panel at a time.
Following best practices, be sure to dry once completed.

Do not use on hot surfaces or in direct sunlight.

4 oz.


Federal regulations prohibit the shipment of this products by air, UPS 3 Day, UPS 2, or US Mail. This item is shipped by UPS Ground only. Sorry but no APO or FPO addresses.
"|"BLACKFIRE HydroSeal Concentrate"|""|""|""|""|""|""|"(:HYDROSEAL-CONCENTRATE-8)"|""||""|""|""|""|""|""||0| hydroseal-concentrate-8|BF-600-8|CUSTOM-ITEM|"BLACKFIRE HydroSeal Concentrate 8 oz."|"https://www.blackfirewax.com/hydroseal-concentrate-8.html"|(34.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Better protection at an even better price!

BLACKFIRE HydroSeal Concentrate is already such an incredible product, the only way it could be made better is to make it even more affordable than it already is! BLACKFIRE HydroSeal Concentrate gives both the professional detailer and detailing enthusiast the ideal protection at the ideal price! With a dilution ratio of 1:7, a mere 4 oz. of BLACKFIRE HydroSeal Concentrate can give up a full 32 oz. of pure SiO2 protection! BLACKFIRE HydroSeal Concentrate is an expertly formulated product designed to make applying durable SiO2 protection to your paint easier than it has ever been. A simple spray and rinse application means you can provide intense hydrophobic properties to your entire paint surface in mere minutes!

---

---

We all love a nice-looking car that is well protected, but with how busy our days are, no one has time to spend hour applying a wax or sealant. Most waxes or sealants require you to spend hours slowly working your way around your car applying the product section by section. You have to be careful to ensure that the application is smooth, thin, and consistent or you will end up with paint that looks magnificent in some areas and hazy in others.

BLACKFIRE HydroSeal Concentrate take all the guess work and almost all of the time out of the process of protecting your paint. In fact, it turns the hours of careful wax application into a mere extra few minutes after your weekly car wash. All it takes to apply this incredible product is to simply spray it directly onto the surface and quickly rinse it away. It doesn’t get any easier than that!

---

BLACKFIRE HydroSeal Concentrate is easily applied. First, rinse off your vehicle.

---

Now, being quick to apply doesn’t amount to much at all if it only provides protection a day or two. Thanks to the SiO2 in the formula for BLACKFIRE HydroSeal Concentrate, the protection it provides can even outlast waxes!

Spending a few minutes to apply BLACKFIRE HydroSeal Concentrate provides your paint with immense hydrophobic properties. Water will bead-up on your paint instead of spreading out over the surface, depositing minerals and contamination. BLACKFIRE HydroSeal Concentrate relieves any worry about water-spots or mineral deposits!

---

Spray HydroSeal on, then rinse off!

---

BLACKFIRE HydroSeal Concentrate even saves you money! The 1:7 dilution ratio means you’ll be able to produce up to 32 oz. of working product with a small 4 oz. bottle. Now you have no excuse to bother with traditional waxes or sealants, welcome to the future of detailing!

Directions for Use:
Dilute accordingly.
Wash entire vehicle but do NOT dry - HydroSeal Concentrate is applied to wet surfaces!
After rinsing away your car wash, simply spray HydroSeal Concentrate directly onto the surface to be treated and immediately rinse away with your hose using a strong jet of water.
Continue around the vehicle working one panel at a time.
Following best practices, be sure to dry once completed.

Do not use on hot surfaces or in direct sunlight.

8 oz.


Federal regulations prohibit the shipment of this products by air, UPS 3 Day, UPS 2, or US Mail. This item is shipped by UPS Ground only. Sorry but no APO or FPO addresses.
"|"BLACKFIRE HydroSeal Concentrate 8 oz. "|""|""|""|""|""|""|"(:HYDROSEAL-CONCENTRATE-4)"|""||""|""|""|""|""|""||0| ready-to-use-hydroseal-duo|BF-610-128-P|CUSTOM-ITEM|"Blackfire HydroSeal Duo Pack"|"https://www.blackfirewax.com/ready-to-use-hydroseal-duo.html"|(117.98)|(79.99)|T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|" Incredible protection, quick application!

Blackfire HydroSeal is an expertly formulated product designed to make applying durable SiO2 protection to your paint easier than it has ever been. A simple spray and rinse application means you can apply Blackfire HydroSeal to your entire paint surface in mere minutes! Blackfire HydroSeal will cause water to bead up, greatly reducing the risk of water-spots and mineral deposits!

We all love a nice-looking car that is well protected, but with how busy our days are, no one has time to spend hour applying a wax or sealant. Most waxes or sealants require you to spend hours slowly working your way around your car applying the product section by section. You have to be careful to ensure that the application is smooth, thin, and consistent or you will end up with paint that looks magnificent in some areas and hazy in others.

Blackfire HydroSeal take all the guess work and almost all of the time out of the process of protecting your paint. In fact, it turns the hours of careful wax application into a mere extra few minutes after your weekly car wash. All it takes to apply this incredible product is to simply spray it directly onto the surface and quickly rinse it away. It doesn’t get any easier than that!

Now, being quick to apply doesn’t amount to much at all if it only provides protection a day or two. Thanks to the SiO2 in the formula for Blackfire HydroSeal, the protection it provides can even outlast waxes! One of the biggest risks and annoyances to your paint is water and the minerals and dirt that it brings along with it. This is because water that finds its way onto your paint is almost never just water. This water is filled with minerals, contaminants, and dirt. Once the water evaporates, this debris is left to sit on your paint surface, etching away at your clear coat and ruin your paint’s gloss. Blackfire HydroSeal can easily prevent your paint from suffering from these contaminants!

Spending a few minutes to apply Blackfire HydroSeal provides your paint with immense hydrophobic properites. Water will bead-up on your paint instead of spreading out over the surface, depositing minerals and contamination. Blackfire HydroSeal relieves any worry about water-spots or mineral deposits!

If you, like all of us, are looking for a way to protect you paint without having to devote your entire weekend to the cause, Blackfire HydroSeal is the product for you!

Directions: Dilute accordingly. Wash entire vehicle but do NOT dry - HydroSeal is applied to wet surfaces! After rinsing away your car wash, simply spray HydroSeal directly onto the surface to be treated and immediately rinse away with your hose using a strong jet of water. Continue around the vehicle working one panel at a time. Following best practices, be sure to dry once completed.

128 oz. "|"Blackfire HydroSeal Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-midnight-sun-detailer-128|BF-275-128|CUSTOM-ITEM|"BLACKFIRE Instant Detailer 128 oz."|"http://www.blackfirewax.com/blackfire-midnight-sun-detailer-128.html"|(59.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

BLACKFIRE Instant Detailer is a supercharged blend of Ivory Carnuaba Wax, Wet Diamond polymers, and high lubricity cleaners. This shine-boosting detail spray instantly revives a dull finish and reactivates existing wax. BLACKFIRE Instant Detailer looks best over Midnight Sun Paste Wax but it is compatible with all waxes. Use this incredible spray to maintain BLACKFIRE's trademark “Wet Ice Over Fire” shine or over your favorite wax or sealant.

The shimmer of fresh wax fades quickly, even though the wax is still there. Dust and dirt settle on the paint while bugs and birds do their parts to diminish the shine. What you need is a way to recharge and supercharge the existing wax and renew the gloss. You need BLACKFIRE Instant Detailer!

BLACKFIRE Instant Detailer is a high lubricity spray that loosens dust and light contamination so it wipes away without scratching. You can use it to remove dust, dirt, fingerprints, smudges, as well as fresh bugs and bird droppings. High gloss Wet Diamond polymers bond to the existing wax to breathe new life into it and Ivory Carnauba wax intensifies the liquid shimmer. In an instant, the paint looks shinier, deeper, and more reflective.

BLACKFIRE Instant Detailer buffs out easily and leaves a streak-free shine, even on dark colors. Enjoy the satisfaction of a just-waxed vehicle any time, instantly! BLACKFIRE Instant Detailer gives wax the boost it needs to go the distance.

Directions:

Shake well BLACKFIRE Instant Detailer before use. Mist one panel at a time and use a soft, clean microfiber towel to wipe off dust and dirt. Flip the towel and buff to a deep shine.

128 oz.

"|""|""|""|""|""|""|""|"(:BLACKFIRE-MIDNIGHT-SUN-DETAILER-5G)"|""||""|""|""|""|""|""||0| blackfire-midnight-sun-detailer|BF-275|CUSTOM-ITEM|"BLACKFIRE Instant Detailer 32 oz."|"http://www.blackfirewax.com/blackfire-midnight-sun-detailer.html"|(24.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

BLACKFIRE Instant Detailer is a supercharged blend of Ivory Carnuaba Wax, Wet Diamond polymers, and high lubricity cleaners.  This shine-boosting detail spray instantly revives a dull finish and reactivates existing wax. BLACKFIRE Instant Detailer looks best over Midnight Sun Paste Wax but it is compatible with all waxes. Use this incredible spray to maintain BLACKFIRE's trademark “Wet Ice Over Fire” shine or over your favorite wax or sealant.

The shimmer of fresh wax fades quickly, even though the wax is still there. Dust and dirt settle on the paint while bugs and birds do their parts to diminish the shine. What you need is a way to recharge and supercharge the existing wax and renew the gloss. You need BLACKFIRE Instant Detailer!

BLACKFIRE Instant Detailer is a high lubricity spray that loosens dust and light contamination so it wipes away without scratching.  You can use it to remove dust, dirt, fingerprints, smudges, as well as fresh bugs and bird droppings. High gloss Wet Diamond polymers bond to the existing wax to breathe new life into it and Ivory Carnauba wax intensifies the liquid shimmer. In an instant, the paint looks shinier, deeper, and more reflective.

BLACKFIRE Instant Detailer buffs out easily and leaves a streak-free shine, even on dark colors. Enjoy the satisfaction of a just-waxed vehicle any time, instantly! BLACKFIRE Instant Detailer gives wax the boost it needs to go the distance.

Directions:

Shake well BLACKFIRE Instant Detailer before use. Mist one panel at a time and use a soft, clean microfiber towel to wipe off dust and dirt. Flip the towel and buff to a deep shine.

32 oz.

"|""|""|""|""|""|""|""|"(:BLACKFIRE-MIDNIGHT-SUN-DETAILER-128 :BLACKFIRE-MIDNIGHT-SUN-DETAILER-5G)"|""||""|""|""|""|""|""|5|1| blackfire-midnight-sun-detailer-5g|BF-275-5G|CUSTOM-ITEM|"BLACKFIRE Instant Detailer 5 Gallon"|"https://www.blackfirewax.com/blackfire-midnight-sun-detailer-5g.html"|(229.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"

BLACKFIRE Instant Detailer is a supercharged blend of Ivory Carnuaba Wax, Wet Diamond polymers, and high lubricity cleaners.  This shine-boosting detail spray instantly revives a dull finish and reactivates existing wax. BLACKFIRE Instant Detailer looks best over Midnight Sun Paste Wax but it is compatible with all waxes. Use this incredible spray to maintain BLACKFIRE's trademark “Wet Ice Over Fire” shine or over your favorite wax or sealant.

The shimmer of fresh wax fades quickly, even though the wax is still there. Dust and dirt settle on the paint while bugs and birds do their parts to diminish the shine. What you need is a way to recharge and supercharge the existing wax and renew the gloss. You need BLACKFIRE Instant Detailer!

BLACKFIRE Instant Detailer is a high lubricity spray that loosens dust and light contamination so it wipes away without scratching.  You can use it to remove dust, dirt, fingerprints, smudges, as well as fresh bugs and bird droppings. High gloss Wet Diamond polymers bond to the existing wax to breathe new life into it and Ivory Carnauba wax intensifies the liquid shimmer. In an instant, the paint looks shinier, deeper, and more reflective.

BLACKFIRE Instant Detailer buffs out easily and leaves a streak-free shine, even on dark colors. Enjoy the satisfaction of a just-waxed vehicle any time, instantly! BLACKFIRE Instant Detailer gives wax the boost it needs to go the distance.

Directions:

Shake well BLACKFIRE Instant Detailer before use. Mist one panel at a time and use a soft, clean microfiber towel to wipe off dust and dirt. Flip the towel and buff to a deep shine.

5 Gallon (640 oz.)

This product is not available for expedited shipping.

"|"BLACKFIRE Instant Detailer 5 Gallon"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-275-duo|BF-275-128-P|CUSTOM-ITEM|"BLACKFIRE Instant Detailer Duo Pack"|"https://www.blackfirewax.com/bf-275-duo.html"|(84.98)|(59.99)|T|""|""|""|""|""|"

BLACKFIRE Instant Detailer is a supercharged blend of Ivory Carnuaba Wax, Wet Diamond polymers, and high lubricity cleaners.  This shine-boosting detail spray instantly revives a dull finish and reactivates existing wax. BLACKFIRE Instant Detailer looks best over Midnight Sun Paste Wax but it is compatible with all waxes. Use this incredible spray to maintain BLACKFIRE's trademark “Wet Ice Over Fire” shine or over your favorite wax or sealant.

The shimmer of fresh wax fades quickly, even though the wax is still there. Dust and dirt settle on the paint while bugs and birds do their parts to diminish the shine. What you need is a way to recharge and supercharge the existing wax and renew the gloss. You need BLACKFIRE Instant Detailer!

BLACKFIRE Instant Detailer is a high lubricity spray that loosens dust and light contamination so it wipes away without scratching.  You can use it to remove dust, dirt, fingerprints, smudges, as well as fresh bugs and bird droppings. High gloss Wet Diamond polymers bond to the existing wax to breathe new life into it and Ivory Carnauba wax intensifies the liquid shimmer. In an instant, the paint looks shinier, deeper, and more reflective.

BLACKFIRE Instant Detailer buffs out easily and leaves a streak-free shine, even on dark colors. Enjoy the satisfaction of a just-waxed vehicle any time, instantly! BLACKFIRE Instant Detailer gives wax the boost it needs to go the distance.

Directions:

Shake well BLACKFIRE Instant Detailer before use. Mist one panel at a time and use a soft, clean microfiber towel to wipe off dust and dirt. Flip the towel and buff to a deep shine.

32 oz.

"|"BLACKFIRE Instant Detailer Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-interior-cleaner|BF-350|CUSTOM-ITEM|"BLACKFIRE Interior Cleaner"|"http://www.blackfirewax.com/blackfire-interior-cleaner.html"|(24.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

Clean the interior germs away!

BLACKFIRE Interior Cleaner is a versatile, water-based cleaner for fabrics, carpet, plastic, metal, and wood! It is designed to be both gentle and effective, and it contains no harmful ingredients. BLACKFIRE Interior Cleaner uses the latest technology in Swedish non-ionic surfactants to safely clean all interior surfaces. Use BLACKFIRE Interior Cleaner to maintain a clean, inviting interior with just one product!

BLACKFIRE Interior Cleaner is formulated with the latest breakthroughs in cleaning technology. One of these breakthroughs occurred in a group of cleaners called non-ionic surfactants. These water-based cleaners replace the acids, butyl and butyl ethers found in many car care cleaners. BLACKFIRE Interior Cleaner is built around a state-of-the-art, non-ionic surfactant developed in Sweden, late in 2002.

BLACKFIRE Interior Cleaner easily removes dirt, dust, and staining from all interior auto surfaces.

Many automotive interiors are finished with leather, vinyl, wood, carpet, fabric, metal and plastic surfaces. BLACKFIRE Interior Cleaner will safely and effectively clean all of these surfaces, replacing a whole shelf full of cleaners. It is a true  100% water-based, multi-material cleaner. It contains no acids, no butyl of any kind, and no petroleum distillates. If a material can be cleaned with water, it can be cleaned with BLACKFIRE Interior Cleaner. It's even safe as a hand cleaner.

BLACKFIRE Interior Cleaner will quickly and safely remove all manner of dirt, grime, oils and stains from almost any material. Use it on leather (except suede and knapped leathers), vinyl, velour, carpet, headliner fabric, wood, plastic, and metal trim. It will not dry out the material being cleaned (including leather), streak plastic or aluminum and poses no known threat to the skin or respiratory system via vapor inhalation.

For maximum cleaning effectiveness, we formulated this cleaner to the same strength as a professional detailing cleaner. As with all cleaners, test for color fastness when cleaning a material for the first time.

Directions:

Spray BLACKFIRE Interior Cleaner directly on material to be cleaned or apply with a microfiber applicator pad. Agitate excessively soiled spots with a brush or damp sponge. Wipe or pat dry with a microfiber cloth.

32 oz.

"|""|""|""|""|""|""|""|"(:INTERIOR-CLEANER-BLACKFIRE :BLACKFIRE-INTERIOR-CLEANER-5G)"|""||""|""|""|""|""|""||0| interior-cleaner-blackfire|BF-350-128|CUSTOM-ITEM|"BLACKFIRE Interior Cleaner 128 oz."|"http://www.blackfirewax.com/interior-cleaner-blackfire.html"|(64.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

Clean the interior germs away!

BLACKFIRE Interior Cleaner is a versatile, water-based cleaner for fabrics, carpet, plastic, metal, and wood! It is designed to be both gentle and effective, and it contains no harmful ingredients. BLACKFIRE Interior Cleaner uses the latest technology in Swedish non-ionic surfactants to safely clean all interior surfaces. Use BLACKFIRE Interior Cleaner to maintain a clean, inviting interior with just one product!

BLACKFIRE Interior Cleaner is formulated with the latest breakthroughs in cleaning technology. One of these breakthroughs occurred in a group of cleaners called non-ionic surfactants. These water-based cleaners replace the acids, butyl and butyl ethers found in many car care cleaners. BLACKFIRE Interior Cleaner is built around a state-of-the-art, non-ionic surfactant developed in Sweden, late in 2002.

BLACKFIRE Interior Cleaner easily removes dirt, dust, and staining from all interior auto surfaces.

Many automotive interiors are finished with leather, vinyl, wood, carpet, fabric, metal and plastic surfaces. BLACKFIRE Interior Cleaner will safely and effectively clean all of these surfaces, replacing a whole shelf full of cleaners. It is a true 100% water-based, multi-material cleaner. It contains no acids, no butyl of any kind, and no petroleum distillates. If a material can be cleaned with water, it can be cleaned with BLACKFIRE Interior Cleaner. It's even safe as a hand cleaner.

BLACKFIRE Interior Cleaner will quickly and safely remove all manner of dirt, grime, oils and stains from almost any material. Use it on leather (except suede and knapped leathers), vinyl, velour, carpet, headliner fabric, wood, plastic, and metal trim. It will not dry out the material being cleaned (including leather), streak plastic or aluminum and poses no known threat to the skin or respiratory system via vapor inhalation.

For maximum cleaning effectiveness, we formulated this cleaner to the same strength as a professional detailing cleaner. As with all cleaners, test for color fastness when cleaning a material for the first time.

Directions:

Spray BLACKFIRE Interior Cleaner directly on material to be cleaned or apply with a microfiber applicator pad. Agitate excessively soiled spots with a brush or damp sponge. Wipe or pat dry with a microfiber cloth.

32 oz.

"|""|""|""|""|""|""|""|"(:BLACKFIRE-INTERIOR-CLEANER-5G)"|""||""|""|""|""|""|""||0| blackfire-interior-cleaner-5g|BF-350-5G|CUSTOM-ITEM|"BLACKFIRE Interior Cleaner 5 Gallon"|"https://www.blackfirewax.com/blackfire-interior-cleaner-5g.html"|(259.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"

Clean the interior germs away!

BLACKFIRE Interior Cleaner is a versatile, water-based cleaner for fabrics, carpet, plastic, metal, and wood! It is designed to be both gentle and effective, and it contains no harmful ingredients. BLACKFIRE Interior Cleaner uses the latest technology in Swedish non-ionic surfactants to safely clean all interior surfaces. Use BLACKFIRE Interior Cleaner to maintain a clean, inviting interior with just one product!

BLACKFIRE Interior Cleaner is formulated with the latest breakthroughs in cleaning technology. One of these breakthroughs occurred in a group of cleaners called non-ionic surfactants. These water-based cleaners replace the acids, butyl and butyl ethers found in many car care cleaners. BLACKFIRE Interior Cleaner is built around a state-of-the-art, non-ionic surfactant developed in Sweden, late in 2002.

BLACKFIRE Interior Cleaner easily removes dirt, dust, and staining from all interior auto surfaces.

Many automotive interiors are finished with leather, vinyl, wood, carpet, fabric, metal and plastic surfaces. BLACKFIRE Interior Cleaner will safely and effectively clean all of these surfaces, replacing a whole shelf full of cleaners. It is a true 100% water-based, multi-material cleaner. It contains no acids, no butyl of any kind, and no petroleum distillates. If a material can be cleaned with water, it can be cleaned with BLACKFIRE Interior Cleaner. It's even safe as a hand cleaner.

BLACKFIRE Interior Cleaner will quickly and safely remove all manner of dirt, grime, oils and stains from almost any material. Use it on leather (except suede and knapped leathers), vinyl, velour, carpet, headliner fabric, wood, plastic, and metal trim. It will not dry out the material being cleaned (including leather), streak plastic or aluminum and poses no known threat to the skin or respiratory system via vapor inhalation.

For maximum cleaning effectiveness, we formulated this cleaner to the same strength as a professional detailing cleaner. As with all cleaners, test for color fastness when cleaning a material for the first time.

Directions:

Spray BLACKFIRE Interior Cleaner directly on material to be cleaned or apply with a microfiber applicator pad. Agitate excessively soiled spots with a brush or damp sponge. Wipe or pat dry with a microfiber cloth.

32 oz.

"|"BLACKFIRE Interior Cleaner 5 Gallon"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-350-duo|BF-350-128-P|CUSTOM-ITEM|"BLACKFIRE Interior Cleaner Duo Pack"|"https://www.blackfirewax.com/bf-350-duo.html"|(89.98)|(64.99)|T|""|""|""|""|""|"BLACKFIRE Interior Cleaner is a versatile, water-based cleaner for fabrics, carpet, plastic, metal, and wood! It is designed to be both gentle and effective, and it contains no harmful ingredients. BLACKFIRE Interior Cleaner uses the latest technology in Swedish non-ionic surfactants to safely clean all interior surfaces. Use BLACKFIRE Interior Cleaner to maintain a clean, inviting interior with just one product! BLACKFIRE Interior Cleaner is formulated with the latest breakthroughs in cleaning technology. One of these breakthroughs occurred in a group of cleaners called non-ionic surfactants. These water-based cleaners replace the acids, butyl and butyl ethers found in many car care cleaners. BLACKFIRE Interior Cleaner is built around a state-of-the-art, non-ionic surfactant developed in Sweden, late in 2002.

BLACKFIRE Interior Cleaner easily removes dirt, dust, and staining from all interior auto surfaces.

Many automotive interiors are finished with leather, vinyl, wood, carpet, fabric, metal and plastic surfaces. BLACKFIRE Interior Cleaner will safely and effectively clean all of these surfaces, replacing a whole shelf full of cleaners. It is a true  100% water-based, multi-material cleaner. It contains no acids, no butyl of any kind, and no petroleum distillates. If a material can be cleaned with water, it can be cleaned with BLACKFIRE Interior Cleaner. It's even safe as a hand cleaner.

BLACKFIRE Interior Cleaner will quickly and safely remove all manner of dirt, grime, oils and stains from almost any material. Use it on leather (except suede and knapped leathers), vinyl, velour, carpet, headliner fabric, wood, plastic, and metal trim. It will not dry out the material being cleaned (including leather), streak plastic or aluminum and poses no known threat to the skin or respiratory system via vapor inhalation.

For maximum cleaning effectiveness, we formulated this cleaner to the same strength as a professional detailing cleaner. As with all cleaners, test for color fastness when cleaning a material for the first time.

 

Directions:

Spray BLACKFIRE Interior Cleaner directly on material to be cleaned or apply with a microfiber applicator pad. Agitate excessively soiled spots with a brush or damp sponge. Wipe or pat dry with a microfiber cloth.

32 oz.

"|"BLACKFIRE Interior Cleaner Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-interior-detailer|BF-365|CUSTOM-ITEM|"BLACKFIRE Interior Detailer 32 oz."|"https://www.blackfirewax.com/blackfire-interior-detailer.html"|(24.99)||T|"Blackfire Car Care"|""|""|""|""|"Bring your interior clean to superior status!

BLACKFIRE Interior Detailer is a quick cleaning and quick protecting interior product designed to save you both time and money. BLACKFIRE Interior Detailer is not meant to replace your standard two-step cleaning and protecting routine, it’s simply used when your interior needs a little sprucing up! BLACKFIRE Interior Detailer will remove dust, fingerprints, and smudges from interior surfaces and leaves behind a low sheen, clean finish that will protect against UV rays – after just one use!

Interior cleaning is an unpleasant but necessary evil. Depending on the level of contamination, you could spend hours spraying, scraping, scrubbing, and wiping. Regular maintenance is the key to easy maintenance and BLACKFIRE Interior Detailer is definitely an easy maintenance product! Just as you would use a quick detailer on your paint to freshen up your exterior, you can use BLACKFIRE Interior Detailer to freshen up your interior!

BLACKFIRE Interior detailer can be used on all interior surfaces – including leather, vinyl, plastic, and even LCD navigation and television screens!

BLACKFIRE Interior Detailer removes dust, light dirt, fingerprints, smudges and more and is safe for use on all interior surfaces – including leather, vinyl, rubber, plastic, and navigation screens. During cleaning, BLACKFIRE Interior Detailer also leaves behind a layer of protection that guards against UV rays, keeping your interior as new as the day you got your car!

BLACKFIRE Interior Detailer is ideal for professional detailers that either don’t have the time to do a strenuous two-step interior detail, or would like to offer a more affordable option for their clients. BLACKFIRE Interior Detailer does, essentially, the work of two products in just one application and lets you move on to the more exciting aspects of detailing.

BLACKFIRE Interior Detailer provides that “just detailed” look to your interior surfaces every time it’s used – and if half the time!

Directions for use:
Shake well. Do not apply to hot surfaces. Spray Interior Detailer onto surface to be cleaned. Using a soft, clean microfiber towel, wipe away dust, dirt, fingerprints, and smudges. Flip to a dry side and buff away excess product. For delicate surfaces and to avoid overspray, spray Interior Detailer onto microfiber towel or pad before application.

32 oz. "|"BLACKFIRE Interior Detailer, quick interior detailer, fast interior detailer"|""|""|""|""|""|""|"(:BLACKFIRE-INTERIOR-DETAILER-5G)"|""||""|""|""|""|""|""||0| blackfire-interior-detailer-5g|BF-365-5G|CUSTOM-ITEM|"BLACKFIRE Interior Detailer 5 Gallon"|"https://www.blackfirewax.com/blackfire-interior-detailer-5g.html"|(199.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Bring your interior clean to superior status!

BLACKFIRE Interior Detailer is a quick cleaning and quick protecting interior product designed to save you both time and money. BLACKFIRE Interior Detailer is not meant to replace your standard two-step cleaning and protecting routine, it’s simply used when your interior needs a little sprucing up! BLACKFIRE Interior Detailer will remove dust, fingerprints, and smudges from interior surfaces and leaves behind a low sheen, clean finish that will protect against UV rays – after just one use!

Interior cleaning is an unpleasant but necessary evil. Depending on the level of contamination, you could spend hours spraying, scraping, scrubbing, and wiping. Regular maintenance is the key to easy maintenance and BLACKFIRE Interior Detailer is definitely an easy maintenance product! Just as you would use a quick detailer on your paint to freshen up your exterior, you can use BLACKFIRE Interior Detailer to freshen up your interior!

BLACKFIRE Interior detailer can be used on all interior surfaces – including leather, vinyl, plastic, and even LCD navigation and television screens!

BLACKFIRE Interior Detailer removes dust, light dirt, fingerprints, smudges and more and is safe for use on all interior surfaces – including leather, vinyl, rubber, plastic, and navigation screens. During cleaning, BLACKFIRE Interior Detailer also leaves behind a layer of protection that guards against UV rays, keeping your interior as new as the day you got your car!

BLACKFIRE Interior Detailer is ideal for professional detailers that either don’t have the time to do a strenuous two-step interior detail, or would like to offer a more affordable option for their clients. BLACKFIRE Interior Detailer does, essentially, the work of two products in just one application and lets you move on to the more exciting aspects of detailing.

BLACKFIRE Interior Detailer provides that “just detailed” look to your interior surfaces every time it’s used – and if half the time!

Directions for use:
Shake well. Do not apply to hot surfaces. Spray Interior Detailer onto surface to be cleaned. Using a soft, clean microfiber towel, wipe away dust, dirt, fingerprints, and smudges. Flip to a dry side and buff away excess product. For delicate surfaces and to avoid overspray, spray Interior Detailer onto microfiber towel or pad before application.

32 oz. "|"BLACKFIRE Interior Detailer 5 Gallon"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-interior-informational||CUSTOM-ITEM|"Blackfire Interior Detailing How-To-Guide"|"https://www.blackfirewax.com/bf-interior-informational.html"||||""|""|""|""|""|"Having a nice looking, clean car is great. It makes you feel sleek and stylish driving down the road, attracting yearning stares and the envy of others. As nice as you want the outside of your car to look, let’s face it, you spend all your time with your car inside of it. Whether you have a daily driver or a show-ready car, your interior gets just as much damage as the exterior, just in different ways. Your interior deals with you tracking in dirt, sand, mud and grime or must cope with the possibility of having cracked leather and faded fabric from harmful UV rays. But have no fear detailers, BLACKFIRE has the products you need to keep your interior looking and feeling like new.

---

BLACKFIRE Interior Detailer: The BLACKFIRE Interior Detailer is the perfect product to use when your interior needs a little spruce. Maybe you took it to the beach, maybe your dog has been riding around in it too much or maybe your little ones have made the backseat their own. In any case, BLACKFIRE Interior Detailer is good to have at hand as it removes dust, fingerprints and smudges, while leaving behind a low sheen, clean finish. You can even use it on LCD screens! Plus, it will product against harmful UV rays that are all around us.

---

BLACKFIRE Glass Cleaner: One of the most important aspects to keep clean in your car, if only for safety reasons, is your glass. So, if you are looking for incredibly clear glass, turn to BLACKFIRE Glass Cleaner. It is formulated to create crystal clear glass without streaking! Perfectly safe to use on tinted windows, this glass cleaner is useful on any of your glass surfaces you own (even sunglasses!). Though the formula is safe and gentle, it is still powerful enough to remover pesky smoker’s film.

---

BLACKFIRE Carpet and Upholstery Cleaner: Remove stains and spots from your cloth surfaces fast with the BLACKFIRE Carpet and Upholstery Cleaner. Carpet takes the most wear and tear with our shoes constantly tracking contaminants into the car and grabbing ahold of the carpet fibers. No stain is too tough, so don’t let your kids or pet messes scare you too much if they left your backseat dirty! Made from naturally occurring solvents, this product is safe on non-suede carpet and upholstery interior surfaces and won’t cause any damage. Did you know cloth surfaces usually take a while to clean due its absorbent nature? Carpets absorb liquids and dirt deep into its fibers, making it very difficult to remove once they have dried. This won’t happen with the BLACKFIRE Carpet and Upholstery Cleaner! It has powerful cleaner agents in its formula that will eliminate the stains quickly with little to no agitation.

---

BLACKFIRE Leather Complete: As the name would suggest, BLACKFIRE Leather Complete is the complete package; a cleaner, conditioner and protectant, all in one simple step. Containing naturally based cleaners, this leather cleaner will do everything you want it to without leaving it looking dull or cracked. If you think your leather is too far gone, give BLACKFIRE Leather Complete a chance to make your leather looking supple and new once again, thanks to its condition agents. Best of all, this product saves you time from a grueling process, clean, condition and protect in one! "|""|""|""|""|""|""|""|"(:BLACKFIRE-INTERIOR-DETAILER :BLACKFIRE-CARPET-UPHOLSTERY-CLEANER :BLACKFIRE-LEATHER-COMPLETE :WET-DIAMOND-GLASS-CLEANER)"|""||""|""|""|""|""|""||0| blackfire-interior-guard-kit|BF-INTG-KIT|CUSTOM-ITEM|"BLACKFIRE Interior Guard Kit"|"https://www.blackfirewax.com/blackfire-interior-guard-kit.html"|(96.93)|(69.99)|T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"When the outside gets in, prevent it from growing roots!

The BLACKFIRE Interior Guard Kit was designed to let you keep your car’s inside protected from all that is outside. Whenever you climb into your car, you are bringing with you a slew of outside contaminants and dangers. The only way to prevent these contaminants from ruining your car’s delicate interior is to properly protect these surfaces. The BLACKFIRE Interior Guard Kit will give you ever product and tool you’ll need to adequately keep your fabrics, mats, plastic, leather, and vinyl surface protected and clean!

The BLACKFIRE Interior Guard Kit includes:

BLACKFIRE Fabric Protectant
BLACKFIRE Fabric Protectant makes caring for your cars carpet or fabric interior nearly effortless. By applying an ultra-hydrophobic layer of protection to the surface, BLACKFIRE Fabric Protectant will prevent any moisture from being absorbed by your carpet and upholstery. Whether you spill your morning cup of coffee, forget to bring a towel with you on your beach trip, or get caught in a rainstorm on your way to the car, BLACKFIRE Fabric Protectant will make sure your fabric doesn’t suffer the consequences!

BLACKFIRE Mat Cleaner & Protectant
BLACKFIRE Mat Cleaner & Protectant is the solution to those dull, dirty, and dingy, floormats that you have been step all over! All the common types of debris and contamination that plague floormats are easily and effectively removed with the use of BLACKFIRE Mat Cleaner & Protectant. Dirt, mud, road salt, snow, beverages, and many more will all be swiftly broken down by the thorough cleaner agents contained in BLACKFIRE Mat Cleaner & Protectant. You can’t stop your floormats from getting messy, but that doesn’t mean you have to keep them that way!

BLACKFIRE Interior Protectant
BLACKFIRE Interior Protectant is the only product you need to maintain the look and feel of leather and soft vinyl upholstery. This 100% water based protectant uses micro-engineered polymers that are readily accepted by leather and soft vinyl. BLACKFIRE Interior Protectant contains no oils, silicons, or petroleum distillates. It leaves a deep, satin, natural-look finish on interior auto surfaces.

Carbon Black Edgeless Microfiber Polishing Cloth
The Carbon Black is made of a densely woven microfiber. The Carbon Black Edgeless Microfiber Polishing Cloth is a 75/25 blend of polyester and polyamide, respectively. When microfiber was first developed, it was widely believed that a higher percentage of polyester was required to make an effective cleaning cloth. Now we know that the cleaning ability of the cloth is determined by its weave structure.

Mat & Carpet Scrub Brush
More than your standard issue scrub brush, this one is a powerhouse against inevitable spills and ground in dirt underfoot because of its superior quality. Your carpets and mats are one of the most visible, yet hardest to maintain parts of the car. The right tool, with the right product will help you keep your mats looking their best.

This kit includes:
1 x 32 oz. BLACKFIRE Fabric Protectant
1 x 32 oz. BLACKFIRE Mat Cleaner & Protectant
1 x 32 oz. BLACKFIRE Interior Protectant
3 x 16”x 16” Carbon Black Edgeless Microfiber Polishing Cloth
1 x Mat & Carpet Scrub Brush

A total retail value of $96.93. Save $26.94! "|"BLACKFIRE Interior Guard Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-interior-protectant|BF-360|CUSTOM-ITEM|"BLACKFIRE Interior Protectant"|"http://www.blackfirewax.com/blackfire-interior-protectant.html"|(31.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

The superior protector of the interior!

BLACKFIRE Interior Protectant is the only product you need to maintain the look and feel of leather and soft vinyl upholstery. This 100% water based protectant uses micro-engineered polymers that are readily accepted by leather and soft vinyl. BLACKFIRE Interior Protectant contains no oils, silicones, or petroleum distillates. It leaves a deep, satin, natural-looking finish on interior auto surfaces. This unique protectant is perfectly pH-balanced (7) to match the pH requirements of leather. After treatment, a micro-fine moisture barrier remains on the surface to resist perspiration stains and help retard UV-induced fading.

BLACKFIRE Interior Protectant can be used on all interior surfaces, including leather wrapped door panels and leather seats!

BLACKFIRE Interior Protectant enhances and protects vinyl and moisturizes and protects leather. It functions as a leather conditioner, a vinyl protectant, and a multi-surface interior protectant! Use Interior Protectant to enhance and protect interior wood accent strips, polished and satin metals, plastic panels and cup holders.

What makes all of this possible is a newly developed, state-of-the-art polymer that protects, moisturizes, and softens with a natural pH that is perfect for leather. This new polymer has been chemically micro-engineered to perform both the function of a protectant and the function of a moisturizing lotion. It was crafted for the skin care industry but we found the characteristics of this new polymer perfect for a multi-material interior protectant. This unique formula is boosted with Polycharger to enhance its durability and protective properties.

BLACKFIRE Interior Protectant dries quickly to a non-greasy, satin finish that does not attract dust!
It is perfect for today's new interior materials. Many new automotive leathers are topped with a clear vinyl layer for protection. Owners can mistakenly treat these "leathers" with a leather conditioner which results in a greasy film because the oils are unable to penetrate the vinyl topping. BLACKFIRE Interior Protectant is perfect for both naturally faced and vinyl faced leathers. The satin finish will not create dash glare and complements the matte vinyl now used on most dashboards.

Directions:

Spray BLACKFIRE Interior Protectant directly on the surface or spray a microfiber applicator pad and wipe areas to avoid overspray on glass. On leather, allow a minute or two for product to penetrate. Wipe surface with a clean Cobra Microfiber Towel. If overspray lands on glass, it can be wiped off easily with any glass cleaner. BLACKFIRE Interior Protectant dries very quickly allowing you to drive the vehicle immediately without fear of staining clothing.

32 oz.

"|""|""|""|""|""|""|""|"(:BLACKFIRE-INTERIOR- :BLACKFIRE-INTERIOR-PROTECTANT-5G)"|""||""|""|""|""|""|""|5|1| blackfire-interior-|BF-360-128|CUSTOM-ITEM|"BLACKFIRE Interior Protectant 128 oz."|"http://www.blackfirewax.com/blackfire-interior-.html"|(99.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

BLACKFIRE Interior Protectant is the only product you need to maintain the look and feel of leather and soft vinyl upholstery. This 100% water based protectant uses micro-engineered polymers that are readily accepted by leather and soft vinyl. BLACKFIRE Interior Protectant contains no oils, silicones, or petroleum distillates. It leaves a deep, satin, natural-looking finish on interior auto surfaces. This unique protectant is perfectly pH-balanced (7) to match the pH requirements of leather. After treatment, a micro-fine moisture barrier remains on the surface to resist perspiration stains and help retard UV-induced fading.

BLACKFIRE Interior Protectant can be used on all interior surfaces, including leather wrapped door panels and leather seats!

BLACKFIRE Interior Protectant enhances and protects vinyl and moisturizes and protects leather. It functions as a leather conditioner, a vinyl protectant, and a multi-surface interior protectant! Use Interior Protectant to enhance and protect interior wood accent strips, polished and satin metals, plastic panels and cup holders.

What makes all of this possible is a newly developed, state-of-the-art polymer that protects, moisturizes, and softens with a natural pH that is perfect for leather. This new polymer has been chemically micro-engineered to perform both the function of a protectant and the function of a moisturizing lotion. It was crafted for the skin care industry but we found the characteristics of this new polymer perfect for a multi-material interior protectant. This unique formula is boosted with Polycharger to enhance its durability and protective properties.

BLACKFIRE Interior Protectant dries quickly to a non-greasy, satin finish that does not attract dust!
It is perfect for today's new interior materials. Many new automotive leathers are topped with a clear vinyl layer for protection. Owners can mistakenly treat these "leathers" with a leather conditioner which results in a greasy film because the oils are unable to penetrate the vinyl topping. BLACKFIRE Interior Protectant is perfect for both naturally faced and vinyl faced leathers. The satin finish will not create dash glare and complements the matte vinyl now used on most dashboards.

Directions:

Spray BLACKFIRE Interior Protectant directly on the surface or spray a microfiber applicator pad and wipe areas to avoid overspray on glass. On leather, allow a minute or two for product to penetrate. Wipe surface with a clean Cobra Microfiber Towel. If overspray lands on glass, it can be wiped off easily with any glass cleaner. BLACKFIRE Interior Protectant dries very quickly allowing you to drive the vehicle immediately without fear of staining clothing.

128 oz.

"|""|""|""|""|""|""|""|"(:BLACKFIRE-INTERIOR-PROTECTANT-5G)"|""||""|""|""|""|""|""||0| blackfire-interior-protectant-5g|BF-360-5G|CUSTOM-ITEM|"BLACKFIRE Interior Protectant 5 Gallon"|"https://www.blackfirewax.com/blackfire-interior-protectant-5g.html"|(389.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"

BLACKFIRE Interior Protectant is the only product you need to maintain the look and feel of leather and soft vinyl upholstery. This 100% water based protectant uses micro-engineered polymers that are readily accepted by leather and soft vinyl. BLACKFIRE Interior Protectant contains no oils, silicones, or petroleum distillates. It leaves a deep, satin, natural-looking finish on interior auto surfaces. This unique protectant is perfectly pH-balanced (7) to match the pH requirements of leather. After treatment, a micro-fine moisture barrier remains on the surface to resist perspiration stains and help retard UV-induced fading.

BLACKFIRE Interior Protectant can be used on all interior surfaces, including leather wrapped door panels and leather seats!

BLACKFIRE Interior Protectant enhances and protects vinyl and moisturizes and protects leather. It functions as a leather conditioner, a vinyl protectant, and a multi-surface interior protectant! Use Interior Protectant to enhance and protect interior wood accent strips, polished and satin metals, plastic panels and cup holders.

What makes all of this possible is a newly developed, state-of-the-art polymer that protects, moisturizes, and softens with a natural pH that is perfect for leather. This new polymer has been chemically micro-engineered to perform both the function of a protectant and the function of a moisturizing lotion. It was crafted for the skin care industry but we found the characteristics of this new polymer perfect for a multi-material interior protectant. This unique formula is boosted with Polycharger to enhance its durability and protective properties.

BLACKFIRE Interior Protectant dries quickly to a non-greasy, satin finish that does not attract dust!
It is perfect for today's new interior materials. Many new automotive leathers are topped with a clear vinyl layer for protection. Owners can mistakenly treat these "leathers" with a leather conditioner which results in a greasy film because the oils are unable to penetrate the vinyl topping. BLACKFIRE Interior Protectant is perfect for both naturally faced and vinyl faced leathers. The satin finish will not create dash glare and complements the matte vinyl now used on most dashboards.

Directions:

Spray BLACKFIRE Interior Protectant directly on the surface or spray a microfiber applicator pad and wipe areas to avoid overspray on glass. On leather, allow a minute or two for product to penetrate. Wipe surface with a clean Cobra Microfiber Towel. If overspray lands on glass, it can be wiped off easily with any glass cleaner. BLACKFIRE Interior Protectant dries very quickly allowing you to drive the vehicle immediately without fear of staining clothing.

5 Gallons (640 oz.)

This product is not available for expedited shipping.

"|"BLACKFIRE Interior Protectant 5 Gallon"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-360-duo|BF-360-128-P|CUSTOM-ITEM|"BLACKFIRE Interior Protectant Duo Pack"|"https://www.blackfirewax.com/bf-360-duo.html"|(119.98)|(89.99)|T|""|""|""|""|""|"

BLACKFIRE Interior Protectant is the only product you need to maintain the look and feel of leather and soft vinyl upholstery. This 100% water based protectant uses micro-engineered polymers that are readily accepted by leather and soft vinyl. BLACKFIRE Interior Protectant contains no oils, silicones, or petroleum distillates. It leaves a deep, satin, natural-looking finish on interior auto surfaces. This unique protectant is perfectly pH-balanced (7) to match the pH requirements of leather. After treatment, a micro-fine moisture barrier remains on the surface to resist perspiration stains and help retard UV-induced fading.

BLACKFIRE Interior Protectant can be used on all interior surfaces, including leather wrapped door panels and leather seats!

BLACKFIRE Interior Protectant enhances and protects vinyl and moisturizes and protects leather. It functions as a leather conditioner, a vinyl protectant, and a multi-surface interior protectant! Use Interior Protectant to enhance and protect interior wood accent strips, polished and satin metals, plastic panels and cup holders.

What makes all of this possible is a newly developed, state-of-the-art polymer that protects, moisturizes, and softens with a natural pH that is perfect for leather. This new polymer has been chemically micro-engineered to perform both the function of a protectant and the function of a moisturizing lotion. It was crafted for the skin care industry but we found the characteristics of this new polymer perfect for a multi-material interior protectant. This unique formula is boosted with Polycharger to enhance its durability and protective properties.

BLACKFIRE Interior Protectant dries quickly to a non-greasy, satin finish that does not attract dust!
It is perfect for today's new interior materials. Many new automotive leathers are topped with a clear vinyl layer for protection. Owners can mistakenly treat these "leathers" with a leather conditioner which results in a greasy film because the oils are unable to penetrate the vinyl topping. BLACKFIRE Interior Protectant is perfect for both naturally faced and vinyl faced leathers. The satin finish will not create dash glare and complements the matte vinyl now used on most dashboards.

Directions:

Spray BLACKFIRE Interior Protectant directly on the surface or spray a microfiber applicator pad and wipe areas to avoid overspray on glass. On leather, allow a minute or two for product to penetrate. Wipe surface with a clean Cobra Microfiber Towel. If overspray lands on glass, it can be wiped off easily with any glass cleaner. BLACKFIRE Interior Protectant dries very quickly allowing you to drive the vehicle immediately without fear of staining clothing.

32 oz.

"|"BLACKFIRE Interior Protectant Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-intermediate-detailer-kit|GR-BF-INT-KIT|CUSTOM-ITEM|"Blackfire Intermediate Detailer Kit"|"https://www.blackfirewax.com/bf-intermediate-detailer-kit.html"|(514.78)|(437.99)|T|""|""|""|""|""|"The perfect kit for intermediates in the detailing world!

Maybe you’re not quite an expert with your own shop, but you’re beyond the beginning stages of detailing? Then the BLACKFIRE Intermediate Detailer Kit is the one for you, loading with everything you need to grow in expertise in the field. The Griot’s Garage G9 Random Orbital Polisher is powerful polisher that has an 8.5-amp motor, great speed control for a smooth experience and an easy-to-hold grip. Use it with the two types of pads included in this kit, the 6.5” White Heavy Polishing Flat Pad and 6.5” Black Finishing Pad. The white has little cutting power and is best suited for pre-wax applications, while the black has no cut and is perfect for the application of waxes and sealants. Use the BLACKFIRE Clay Mitt to rid your car decontaminants before you begin any process, by sliding the clay side of the mitt against the surface. BLACKFIRE Iron Remover, as it says, removes iron. Watch the product change to purple as you see the iron being lifted from the surface. BLACKFIRE Car Wash is the wash for the master, full of powerful cleaning agents to remove dust, dirt, grime and other environmental contaminants. BLACKFIRE Polish corrects mild imperfections to end with a glossy finish. BLACKFIRE Paint Sealant creates a sleek, slippery and vibrant paint finish that is guaranteed to turn some heads. The Supreme Micro-Chenille Wash Mitt is the perfect washing tool for your hand. If slips perfectly on your hand and allows you to glide across your car’s wet surface without scratching. A couple of Cobra Guzzler Waffle Weave Drying Towels are large enough to dry large surfaces of your car, while knowing the paint is not being harmed. Plus, you can never go wrong with a bunch of Storm Gray Edgeless Microfiber Polishing Cloths for precise polishing.

Items in this kit:

Griot’s Garage G9 Random Orbital Polisher

Griot’s Garage G9 Random Orbital Polisher is the innovative redesign of the Griot’s Garage 6 Inch Random Orbital Polisher that you’ve been waiting for. Griot’s Garage is known for their trusted reputation among professional detailers and detailing enthusiasts who are looking for easily accessible, professional-grade detailing products. The newest Griot’s Garage G9 Random Orbital Polisher carries on this trust thanks to some key upgrades and improvements! Some of the new features include superior ergonomics, a powerful 1000-watt, 8.5-amp motor, and constant speed control for an even smoother polishing experience than ever before! Griot's Garage G9 Random Orbital Polisher also comes with a detachable 10-foot cord to make storing your tool easy!

BLACKFIRE Iron Remover

BLACKFIRE Iron Remover is an easy-to-use, chemical paint decontamination product designed to remove large amount of iron and industrial fallout from your painted surfaces and wheels. The color-changing formula indicates proper application as the product changes from clear to purple as paint contaminants are removed! Paint decontamination is needed on even the newest cars; you can’t achieve a proper shine and finish without it! BLACKFIRE Iron Remover means less hard work for you, and a quicker detail time overall!

BLACKFIRE Car Wash

BLACKFIRE Car Wash cleans your vehicle and renews the shine every time you wash your car. BLACKFIRE's tri-polymers replenish and reinforce existing paint protection. Incredible Tuff Suds II technology creates mountains of suds to help float away grime and dirt, without scratching the finish. Drying agents help reduce water spotting and make drying easier. BLACKFIRE Car Wash helps your vehicle look just waxed after every wash!

BLACKFIRE Polish

BLACKFIRE Polish uses nano-abrasives to remove 2500-3000 grit sanding marks on fresh paints and to correct mild imperfections on cured paints. These fine abrasives burnish the finish to an incredible gloss! BLACKFIRE Polish can be used to refine the paint after compounding or as a one-step shine enhancing polish.

BLACKFIRE Paint Sealant

BLACKFIRE Paint Sealant is a premium paint sealant designed for the perfectionist. It creates an extremely slick finish and incredible depth with a revolutionary blend of three incredible polymers. Sourced from Germany and Switzerland, these polymers have a protective quality and depth of gloss that surpassed all others tested. BLACKFIRE Paint Sealant refracts light, similar to a diamond, to create a vibrant, super slippery, head-turning finish.

BLACKFIRE Clay Mitt

BLACKFIRE Clay Mitt is a specialized wash mitt that uses an advanced rubberized material to safely remove embedded contaminants in your paint. This synthetic coating works the way a traditional clay bar does, but with a lot less mess! BLACKFIRE Clay Mitt will safely remove over-spray, road grime, dirt, industrial fall-out, tree sap and more with just one pass! Engineered as a two-in-one tool, the BLACKFIRE Clay Mitt works as both a wash mitt AND a method of decontamination!

6.5” White Heavy Polishing Flat Pad

Less dense foam formula for the application of cleaner waxes, one step polishes, or ""all in one"" type products. This pad has very light cutting power, so it's perfect for pre-wax cleaners.

6.5” Black Finishing Flat Pad

Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.

Supreme Micro-Chenille Wash Mitt

Our Supreme Micro-Chenille Wash Mitt has 40% larger microfiber fingers than our standard micro-chenille wash mitts! This wash mitt has all the paint-pampering features of the original mitt plus superior durability and a larger size. The Supreme Micro-Chenille Wash Mitt lathers your vehicle in suds for a safe, swirl-free wash!

Cobra Supreme Guzzler Waffle Weave Drying Towel

The Supreme Guzzler is 20% thicker than the original towel to give it an even greater capacity for moisture. At approximately 5.5 square feet, this waffle weave towel can dry most small cars without being rung out once! As you may well know, microfiber is made of two synthetic fibers: polyester and polyamide. Polyester accounts for the towel's durability and polishing properties while polyamide is silky soft. The plush 80/20 weave of the two fibers allow the towel to hold a tremendous amount of water; seven times its own weight!

Storm Gray Edgeless Microfiber Polishing Cloth

The Storm Gray is made of a densely woven microfiber. The Storm Gray Edgeless Microfiber Polishing Cloth is a 75/25 blend of polyester and polyamide, respectively. When microfiber was first developed, it was widely believed that a higher percentage of polyester was required to make an effective cleaning cloth. Now we know that the cleaning ability of the cloth is determined by its weave structure.

Kit includes

1 Griot’s Garage G9 Random Orbital Polisher
1 32 oz. BLACKFIRE Iron Remover
1 32 oz. BLACKFIRE Car Wash
1 32 oz. BLACKFIRE Polish
1 32 oz. BLACKFIRE Paint Sealant
1 BLACKFIRE Clay Mitt
6 6.5” White Heavy Polishing Flat Pad
1 6.5” Black Finishing Flat Pad
1 Supreme Micro-Chenille Wash Mitt
2 20” x 40” Cobra Supreme Guzzler Waffle Weave Drying Towel
6 16” x 16” Storm Gray Edgeless Microfiber Polishing Cloth

A total retail value of $471.78. Save $123.79! "|"Blackfire Intermediate Detailer Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-iron-remover-128|BF-185-128|CUSTOM-ITEM|"BLACKFIRE Iron Remover 128 oz."|"https://www.blackfirewax.com/bf-iron-remover-128.html"|(99.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"It's time for your car and fallout to have a falling out!

BLACKFIRE Iron Remover is designed to effectively remove iron contamination from your paint surfaces and wheels. The formula for BLACKFIRE Iron Remover contains special agents that bond with iron particles on a molecular level and pull them off your car’s surface. Simply by existing, your car is exposed to large amounts of industrial fallout and iron contamination, so let BLACKFIRE Iron Remover keep your paint clean and protected!

Vehicles face an onslaught of contamination every day. Be is rain, dirt, dust, bird dropping, bug remains – you name it. If it’s in the air, it’s on your car! And those are just the contaminants that you can see! What about the industrial fallout created by metal particles in the air? Those are harder to see, but believe us, they’re there! When those particles are allowed to dwell on your paint, they can cause erosion and rusting – not to mention the impairment to your perfect finish!

---

BLACKFIRE Iron Remover is color-changing and turns from clear to purple/red when in contact and during the removal of embedded iron contaminants!

---

It’s important to remove all of these iron particles from your paint to avoid any future damage. The easiest way to do that? BLACKFIRE Iron Remover! This fast-acting, color-changing formula that works to dissolve and remove embedded ferrous iron contaminants in your paint for an advanced clean. BLACKFIRE Iron Remover chemically bonds with iron contaminants in your paint and will remove them from the surface safely and efficiently.

In a perfect world, BLACKFIRE Iron Remover would be the only prep you needed, but as it only removes iron particles from your wheels and paint, claying your vehicle after using BLACKFIRE Iron Remover is necessary. But don’t worry! BLACKFRIE Iron Remover also doubles as a heavy-duty wheel cleaner, so that step is completed as well!

---

BLACKFIRE Iron Remover, in addition to removing iron contaminants from paint, is also an extremely effective wheel cleaner.
BLACKFIRE Iron Remover quickly removes embedded brake dust from wheels - both decontaminating and cleaning them!

---

Just as it works to remove iron particles from your paint, BLACKFIRE Iron Remover will remove embedded brake dust from your wheels’ finish as well. In fact, that’s one of the most popular areas to see the famous color changing action! BLACKFIRE iron Remover chemically decontaminates your painted surfaces, wheels, and glass and prepares the surfaces for more intricate paint correction and protection!

---

---

Use BLACKFIRE Iron Remover on:
• Paint
• Wheels
• Glass
• Chrome

Directions for use:
1. BLACKFIRE Iron Remover can be applied to dirty paint before washing the car.
2. Spray directly onto the surface to be treated and allow to dwell for 3-5 minutes.
3. As BLACKFIRE Iron Remover reacts to paint contaminants, the formula will turn from clear to purple/read (that’s how you know it’s working!).
4. Rinse treated surfaces with water and continue with your regular wash/detail.

128 oz. "|"BLACKFIRE Iron Remover 128 oz. "|""|""|""|""|""|""|"(:BF-IRON-REMOVER-5G)"|""||""|""|""|""|""|""||0| bf-iron-remover|BF-185|CUSTOM-ITEM|"BLACKFIRE Iron Remover 32 oz."|"https://www.blackfirewax.com/bf-iron-remover.html"|(29.99)||T|""|""|""|""|""|"It's time for your car and fallout to have a falling out!

BLACKFIRE Iron Remover is designed to effectively remove iron contamination from your paint surfaces and wheels. The formula for BLACKFIRE Iron Remover contains special agents that bond with iron particles on a molecular level and pull them off your car’s surface. Simply by existing, your car is exposed to large amounts of industrial fallout and iron contamination, so let BLACKFIRE Iron Remover keep your paint clean and protected!

Vehicles face an onslaught of contamination every day. Be is rain, dirt, dust, bird dropping, bug remains – you name it. If it’s in the air, it’s on your car! And those are just the contaminants that you can see! What about the industrial fallout created by metal particles in the air? Those are harder to see, but believe us, they’re there! When those particles are allowed to dwell on your paint, they can cause erosion and rusting – not to mention the impairment to your perfect finish!

---

BLACKFIRE Iron Remover is color-changing and turns from clear to purple/red when in contact and during the removal of embedded iron contaminants!

---

It’s important to remove all of these iron particles from your paint to avoid any future damage. The easiest way to do that? BLACKFIRE Iron Remover! This fast-acting, color-changing formula that works to dissolve and remove embedded ferrous iron contaminants in your paint for an advanced clean. BLACKFIRE Iron Remover chemically bonds with iron contaminants in your paint and will remove them from the surface safely and efficiently.

In a perfect world, BLACKFIRE Iron Remover would be the only prep you needed, but as it only removes iron particles from your wheels and paint, claying your vehicle after using BLACKFIRE Iron Remover is necessary. But don’t worry! BLACKFRIE Iron Remover also doubles as a heavy-duty wheel cleaner, so that step is completed as well!

---

BLACKFIRE Iron Remover, in addition to removing iron contaminants from paint, is also an extremely effective wheel cleaner.
BLACKFIRE Iron Remover quickly removes embedded brake dust from wheels - both decontaminating and cleaning them!

---

Just as it works to remove iron particles from your paint, BLACKFIRE Iron Remover will remove embedded brake dust from your wheels’ finish as well. In fact, that’s one of the most popular areas to see the famous color changing action! BLACKFIRE iron Remover chemically decontaminates your painted surfaces, wheels, and glass and prepares the surfaces for more intricate paint correction and protection!

---

---

Use BLACKFIRE Iron Remover on:
• Paint
• Wheels
• Glass
• Chrome

Directions for use:
1. BLACKFIRE Iron Remover can be applied to dirty paint before washing the car.
2. Spray directly onto the surface to be treated and allow to dwell for 3-5 minutes.
3. As BLACKFIRE Iron Remover reacts to paint contaminants, the formula will turn from clear to purple/read (that’s how you know it’s working!).
4. Rinse treated surfaces with water and continue with your regular wash/detail.

32 oz. "|"BLACKFIRE Iron Remover 32 oz."|""|""|""|""|""|""|"(:BF-IRON-REMOVER-128 :BF-IRON-REMOVER-5G)"|""||""|""|""|""|""|""||0| bf-iron-remover-5g|BF-185-5G|CUSTOM-ITEM|"BLACKFIRE Iron Remover 5 Gallon"|"https://www.blackfirewax.com/bf-iron-remover-5g.html"|(399.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"It's time for your car and fallout to have a falling out!

BLACKFIRE Iron Remover is designed to effectively remove iron contamination from your paint surfaces and wheels. The formula for BLACKFIRE Iron Remover contains special agents that bond with iron particles on a molecular level and pull them off your car’s surface. Simply by existing, your car is exposed to large amounts of industrial fallout and iron contamination, so let BLACKFIRE Iron Remover keep your paint clean and protected!

Vehicles face an onslaught of contamination every day. Be is rain, dirt, dust, bird dropping, bug remains – you name it. If it’s in the air, it’s on your car! And those are just the contaminants that you can see! What about the industrial fallout created by metal particles in the air? Those are harder to see, but believe us, they’re there! When those particles are allowed to dwell on your paint, they can cause erosion and rusting – not to mention the impairment to your perfect finish!

---

BLACKFIRE Iron Remover is color-changing and turns from clear to purple/red when in contact and during the removal of embedded iron contaminants!

---

It’s important to remove all of these iron particles from your paint to avoid any future damage. The easiest way to do that? BLACKFIRE Iron Remover! This fast-acting, color-changing formula that works to dissolve and remove embedded ferrous iron contaminants in your paint for an advanced clean. BLACKFIRE Iron Remover chemically bonds with iron contaminants in your paint and will remove them from the surface safely and efficiently.

In a perfect world, BLACKFIRE Iron Remover would be the only prep you needed, but as it only removes iron particles from your wheels and paint, claying your vehicle after using BLACKFIRE Iron Remover is necessary. But don’t worry! BLACKFRIE Iron Remover also doubles as a heavy-duty wheel cleaner, so that step is completed as well!

---

BLACKFIRE Iron Remover, in addition to removing iron contaminants from paint, is also an extremely effective wheel cleaner.
BLACKFIRE Iron Remover quickly removes embedded brake dust from wheels - both decontaminating and cleaning them!

---

Just as it works to remove iron particles from your paint, BLACKFIRE Iron Remover will remove embedded brake dust from your wheels’ finish as well. In fact, that’s one of the most popular areas to see the famous color changing action! BLACKFIRE iron Remover chemically decontaminates your painted surfaces, wheels, and glass and prepares the surfaces for more intricate paint correction and protection!

---

---

Use BLACKFIRE Iron Remover on:
• Paint
• Wheels
• Glass
• Chrome

Directions for use:
1. BLACKFIRE Iron Remover can be applied to dirty paint before washing the car.
2. Spray directly onto the surface to be treated and allow to dwell for 3-5 minutes.
3. As BLACKFIRE Iron Remover reacts to paint contaminants, the formula will turn from clear to purple/read (that’s how you know it’s working!).
4. Rinse treated surfaces with water and continue with your regular wash/detail.

5 Gallons (640 oz.) "|"BLACKFIRE Iron Remover 5 Gallon"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-iron-remover-duo|BF-185-128-P|CUSTOM-ITEM|"BLACKFIRE Iron Remover Duo Pack"|"https://www.blackfirewax.com/bf-iron-remover-duo.html"|(109.98)|(79.99)|T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"It's time for your car and fallout to have a falling out!

BLACKFIRE Iron Remover is designed to effectively remove iron contamination from your paint surfaces and wheels. The formula for BLACKFIRE Iron Remover contains special agents that bond with iron particles on a molecular level and pull them off your car’s surface. Simply by existing, your car is exposed to large amounts of industrial fallout and iron contamination, so let BLACKFIRE Iron Remover keep your paint clean and protected!

Vehicles face an onslaught of contamination every day. Be is rain, dirt, dust, bird dropping, bug remains – you name it. If it’s in the air, it’s on your car! And those are just the contaminants that you can see! What about the industrial fallout created by metal particles in the air? Those are harder to see, but believe us, they’re there! When those particles are allowed to dwell on your paint, they can cause erosion and rusting – not to mention the impairment to your perfect finish!

---

BLACKFIRE Iron Remover is color-changing and turns from clear to purple/red when in contact and during the removal of embedded iron contaminants!

---

It’s important to remove all of these iron particles from your paint to avoid any future damage. The easiest way to do that? BLACKFIRE Iron Remover! This fast-acting, color-changing formula that works to dissolve and remove embedded ferrous iron contaminants in your paint for an advanced clean. BLACKFIRE Iron Remover chemically bonds with iron contaminants in your paint and will remove them from the surface safely and efficiently.

In a perfect world, BLACKFIRE Iron Remover would be the only prep you needed, but as it only removes iron particles from your wheels and paint, claying your vehicle after using BLACKFIRE Iron Remover is necessary. But don’t worry! BLACKFRIE Iron Remover also doubles as a heavy-duty wheel cleaner, so that step is completed as well!

---

BLACKFIRE Iron Remover, in addition to removing iron contaminants from paint, is also an extremely effective wheel cleaner.
BLACKFIRE Iron Remover quickly removes embedded brake dust from wheels - both decontaminating and cleaning them!

---

Just as it works to remove iron particles from your paint, BLACKFIRE Iron Remover will remove embedded brake dust from your wheels’ finish as well. In fact, that’s one of the most popular areas to see the famous color changing action! BLACKFIRE iron Remover chemically decontaminates your painted surfaces, wheels, and glass and prepares the surfaces for more intricate paint correction and protection!

---

---

Use BLACKFIRE Iron Remover on:
• Paint
• Wheels
• Glass
• Chrome

Directions for use:
1. BLACKFIRE Iron Remover can be applied to dirty paint before washing the car.
2. Spray directly onto the surface to be treated and allow to dwell for 3-5 minutes.
3. As BLACKFIRE Iron Remover reacts to paint contaminants, the formula will turn from clear to purple/read (that’s how you know it’s working!).
4. Rinse treated surfaces with water and continue with your regular wash/detail.

"|"BLACKFIRE Iron Remover Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-iron-remover-gel|BF-195|CUSTOM-ITEM|"BLACKFIRE Iron Remover Gel"|"https://www.blackfirewax.com/blackfire-iron-remover-gel.html"|(29.99)||T|""|""|""|""|""|"Color-changing formula!

BLACKFIRE Iron Remover Gel is a formula designed to remove unwanted iron particles from painted surfaces. The thick formula of BLACKFIRE Iron Remover Gel clings to the surface and allows for a longer work time for extreme contaminant removal. BLACKFIRE Iron Remover Gel features a unique active ingredient that changes color when it interacts with iron particles and is easily rinsed away. Plus, BLACKFIRE Iron Remover Gel is easy-to-use!

---

---

When you just look at a car, the look can be deceiving. A car may look nice and clean, but once you run your hand along the surface, if it feels rough, then no matter what it looks like, you have contaminants. A lot of the time, these contaminants are iron particles that build up on your wheels or surface, from industrial fallout or brake dust. However, Iron particles don’t always wash away with just water. This is when you need BLACKFIRE Iron Remover Gel. BLACKFIRE Iron Removal Gel is a high viscosity gel that is thick enough to cling to the surface. When this thick formula sticks to the surface of your car or your wheels, it is allowing for a longer working time, thus giving more time for the complete removal of any contaminants brought on by iron particles. Iron particles are typically caused from industrial fallout, brake dust or even train tracks. These particles are usually hard to see, but easy to feel.

---

Spray BLACKFIRE Gel Iron Remover directly onto the surface you are decontaminating.		Allow the clinging gel formula to dwell on the surface, removing an insane amaount of iron contamination!
Rinse the remaining BLACKFIRE Gel Iron Remover and all the iron contamination off the surface with a strong jet of water.		Dry the surface off to avoid waterspots. Enjoy your new smooth and glossy wheel or paint!

---

What’s really cool about BLACKFIRE Iron Remover Gel is that it contains a special unique active ingredient where the formula changes colors once it interacts with iron particles. Once you see the formula change to a reddish/purplish color, you know that BLACKFIRE Iron Remover Gel is doing its job and is safe to rinse away. It is important to note that this product is not intended for anodized aluminum or any other surface that is not clear coated.

What is also great about BLACKFIRE Iron Remover Gel is that it is easy-to-use. Coming in the convenience of a spray bottle, all you have to do is spray the affected surface, wait for the color-changing action to occur and then rinse away. Be sure not to allow BLACKFIRE Iron Remover Gel to dry on the surface.

DIRECTIONS:

*Do NOT use on anodized aluminum or any other surface that is not clear coated.*

-Apply only on cool surfaces and out of direct sunlight.

-Spray BLACKFIRE Iron Remover Gel directly onto the painted surface and allow to dwell.

-As the product comes into contact with iron particles, you’ll see the color start to change.

-Once the color has changed, the product can be safely rinsed away. DO NOT allow product to dry on the surface.

-Continue around the entirety of the vehicle.

32 oz. "|"BLACKFIRE Iron Remover Gel"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-leather-combo|BF-350400|CUSTOM-ITEM|"BLACKFIRE Leather Care Combo"|"http://www.blackfirewax.com/blackfire-leather-combo.html"|(67.97)|(49.99)|T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"Clean and preserve fine leather upholstery in two steps!

BLACKFIRE Interior Cleaner's water-based, multi-surface safe formula lifts dirt and oils out of leather. BLACKFIRE Leather Conditioner replaces vital moisture to retain softness and flexibility. Your vehicle's leather seats will last the life of your vehicle with the superior, nourishing formulas of BLACKFIRE leather care products.

32 oz. BLACKFIRE Interior Cleaner
BLACKFIRE Interior Cleaner is a versatile, water-based cleaner for all leather, vinyl, velour, carpet, headliner fabric, wood, plastic, and metal. It is designed to be both gentle and effective, and it contains no harmful ingredients. BLACKFIRE Interior Cleaner uses Swedish non-ionic surfactants to safely clean all interior surfaces. BLACKFIRE Interior Cleaner is a 100% water-based multi-material cleaner. It contains no acids, no butyl of any kind, and no petroleum distillates. If a material can be cleaned with water, it can be cleaned with BLACKFIRE Interior Cleaner.

32 oz. BLACKFIRE Leather Conditioner
BLACKFIRE Leather Conditioner keeps leather soft with state-of-the-art breathable polymers. Extreme UV protection resists leather yellowing and photo oxidation. The non-slick, satin finish created by Leather Conditioner resists wear and abrasion, arming your car’s leather seats against daily wear and tear. In addition, BLACKFIRE Leather Conditioner leaves a moisture barrier to prevent moisture from breaking down leather or stitching. BLACKFIRE Leather Conditioner is like applying a moisturizing lotion to your leather seats.

Combo includes:
32 oz. BLACKFIRE Interior Cleaner
32 oz. BLACKFIRE Leather Conditioner "|""|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-leather-complete|BF-420|CUSTOM-ITEM|"BLACKFIRE Leather Complete"|"https://www.blackfirewax.com/metro-vacnblo-full-size.html"|(24.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"Perfect leather care in one easy step!

Blackfire Leather Complete will impact the time it takes you to detail your leather interior greatly. Blackfire Leather Complete combines the cleaning, conditioning, and protecting step of the process into one simple step, which will save a ton of time overall. Blackfire Leather Complete contains gentle, naturally based cleaners in its formula that are guaranteed to clean your leather without leaving it looking dull and cracked. Blackfire Leather Complete will restore even the neglected leather to a supple, better than new look with its effective conditioning agents. Blackfire Leather Complete will also fully protect your leather interior by leaving behind a durable layer of protection once it is buffed off the surface.

The interior of your vehicle is an extremely grueling process from start to finish. Each step must be done carefully and slowly to ensure that the delicate surfaces of your interior will not be damaged and will also be properly protected. Probably the surface of your interior that takes the most time is the leather surfaces. Because the leather detailing process is so time-consuming, it is always a relief when you are able to reduce the amount of time you spend detailing your leather. Blackfire Leather Complete allows you to detail your leather in a third of the time it takes now. Blackfire Leather Complete combines all three steps of leather detailing into one easy step. You will be able to clean, condition, and protect your leather all with one product.

Blackfire Leather Complete contains effective cleaner agents in its formula that go to work quickly, removing stains, dirt, and other contaminants from your leather surface. The cleaners in Blackfire Leather Complete are extremely gentle and will not damage your leather while that are working to remove the troublesome spots and stains on your leather interior. Blackfire Leather Complete is guaranteed to not stain, degrade, or dull your leather while you are using it.

Blackfire Leather Complete is formulated with naturally occurring oils and extracts that soak into your leather and penetrate deeply into the surface to provide a deep and effective conditioning step. Blackfire Leather Complete will restore your leather to a better than new condition that will leave it looking and feeling like never before. Best of all, Blackfire Leather Complete will leave a durable layer of protection behind after it is finished that will ensure your leather is properly protected from all of the contaminants that you worked so hard to remove and clean.

Directions:
Start by vacuuming the leather you are working on before application begins. Test Blackfire Leather Complete on an inconspicuous area of your leather to ensure that no color fastness occurs. Apply Blackfire Leather Complete directly onto the surface of your leather and use a microfiber towel to work Blackfire Leather Complete into the surface. Once finished, use a clean microfiber towel to wipe off the excess product from the surface. "|"BLACKFIRE Leather Complete"|""|""|""|""|""|""|"(:BLACKFIRE-LEATHER-COMPLETE-128)"|""||""|""|""|""|""|""||0| blackfire-leather-complete-128|BF-420-128|CUSTOM-ITEM|"BLACKFIRE Leather Complete 128 oz."|"https://www.blackfirewax.com/blackfire-leather-complete-128.html"|(61.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"Perfect leather care in one easy step!

Blackfire Leather Complete will impact the time it takes you to detail your leather interior greatly. Blackfire Leather Complete combines the cleaning, conditioning, and protecting step of the process into one simple step, which will save a ton of time overall. Blackfire Leather Complete contains gentle, naturally based cleaners in its formula that are guaranteed to clean your leather without leaving it looking dull and cracked. Blackfire Leather Complete will restore even the neglected leather to a supple, better than new look with its effective conditioning agents. Blackfire Leather Complete will also fully protect your leather interior by leaving behind a durable layer of protection once it is buffed off the surface.

The interior of your vehicle is an extremely grueling process from start to finish. Each step must be done carefully and slowly to ensure that the delicate surfaces of your interior will not be damaged and will also be properly protected. Probably the surface of your interior that takes the most time is the leather surfaces. Because the leather detailing process is so time-consuming, it is always a relief when you are able to reduce the amount of time you spend detailing your leather. Blackfire Leather Complete allows you to detail your leather in a third of the time it takes now. Blackfire Leather Complete combines all three steps of leather detailing into one easy step. You will be able to clean, condition, and protect your leather all with one product.

Blackfire Leather Complete contains effective cleaner agents in its formula that go to work quickly, removing stains, dirt, and other contaminants from your leather surface. The cleaners in Blackfire Leather Complete are extremely gentle and will not damage your leather while that are working to remove the troublesome spots and stains on your leather interior. Blackfire Leather Complete is guaranteed to not stain, degrade, or dull your leather while you are using it.

Blackfire Leather Complete is formulated with naturally occurring oils and extracts that soak into your leather and penetrate deeply into the surface to provide a deep and effective conditioning step. Blackfire Leather Complete will restore your leather to a better than new condition that will leave it looking and feeling like never before. Best of all, Blackfire Leather Complete will leave a durable layer of protection behind after it is finished that will ensure your leather is properly protected from all of the contaminants that you worked so hard to remove and clean.

Directions:
Start by vacuuming the leather you are working on before application begins. Test Blackfire Leather Complete on an inconspicuous area of your leather to ensure that no color fastness occurs. Apply Blackfire Leather Complete directly onto the surface of your leather and use a microfiber towel to work Blackfire Leather Complete into the surface. Once finished, use a clean microfiber towel to wipe off the excess product from the surface. "|"BLACKFIRE Leather Complete 128 oz."|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-420-duo|BF-420-128-P|CUSTOM-ITEM|"BLACKFIRE Leather Complete Duo Pack"|"https://www.blackfirewax.com/bf-420-duo.html"|(84.98)|(47.99)|T|""|""|""|""|""|"Perfect leather care in one easy step!

Blackfire Leather Complete will impact the time it takes you to detail your leather interior greatly. Blackfire Leather Complete combines the cleaning, conditioning, and protecting step of the process into one simple step, which will save a ton of time overall. Blackfire Leather Complete contains gentle, naturally based cleaners in its formula that are guaranteed to clean your leather without leaving it looking dull and cracked. Blackfire Leather Complete will restore even the neglected leather to a supple, better than new look with its effective conditioning agents. Blackfire Leather Complete will also fully protect your leather interior by leaving behind a durable layer of protection once it is buffed off the surface.

The interior of your vehicle is an extremely grueling process from start to finish. Each step must be done carefully and slowly to ensure that the delicate surfaces of your interior will not be damaged and will also be properly protected. Probably the surface of your interior that takes the most time is the leather surfaces. Because the leather detailing process is so time-consuming, it is always a relief when you are able to reduce the amount of time you spend detailing your leather. Blackfire Leather Complete allows you to detail your leather in a third of the time it takes now. Blackfire Leather Complete combines all three steps of leather detailing into one easy step. You will be able to clean, condition, and protect your leather all with one product.

Blackfire Leather Complete contains effective cleaner agents in its formula that go to work quickly, removing stains, dirt, and other contaminants from your leather surface. The cleaners in Blackfire Leather Complete are extremely gentle and will not damage your leather while that are working to remove the troublesome spots and stains on your leather interior. Blackfire Leather Complete is guaranteed to not stain, degrade, or dull your leather while you are using it.

Blackfire Leather Complete is formulated with naturally occurring oils and extracts that soak into your leather and penetrate deeply into the surface to provide a deep and effective conditioning step. Blackfire Leather Complete will restore your leather to a better than new condition that will leave it looking and feeling like never before. Best of all, Blackfire Leather Complete will leave a durable layer of protection behind after it is finished that will ensure your leather is properly protected from all of the contaminants that you worked so hard to remove and clean.

---

---

Directions:
Start by vacuuming the leather you are working on before application begins. Test Blackfire Leather Complete on an inconspicuous area of your leather to ensure that no color fastness occurs. Apply Blackfire Leather Complete directly onto the surface of your leather and use a microfiber towel to work Blackfire Leather Complete into the surface. Once finished, use a clean microfiber towel to wipe off the excess product from the surface. "|"BLACKFIRE Leather Complete Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-leather-complete-kit|BF-420-CKIT-1|CUSTOM-ITEM|"BLACKFIRE Leather Complete Kit"|"https://www.blackfirewax.com/blackfire-leather-complete-kit.html"|(53.94)|(37.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"Treat your leather with COMPLETE care!

BLACKFIRE Leather Complete Kit provides everything you need to completely detail your car’s leather seats and leather interior surfaces. BLACKFIRE Leather Complete cuts the time you spend detailing leather drastically by combining all three steps of leather detailing into one step! With the included accessories, your leather will be cleaned, conditioned, and protected all in one! Leather is something that requires a lot of care – the BLACKFIRE Leather Complete Kit helps you achieve that!

BLACKFIRE Leather Complete Kit includes:

32 oz. BLACKFIRE Leather Complete
BLACKFIRE Leather Complete will allow you to condense every step of your leather detailing process into one easy step. BLACKFIRE Leather Complete will effectively clean your leather while not damaging the very delicate surface in the process. BLACKFIRE Leather Complete will condition your leather, restoring it to a supple, soft, and better than new condition. BLACKFIRE Leather Complete will leave a durable level of protection behind after application to prevent the onset of further damage in the future.

Microfiber Applicator Pads
With over 200,000 strands of advanced microfibers per square inch, nothing matches its ability to remove dirt, residues, and surface oxidation. An 80/20 polyester/polyamide blend of “split” weave fibers, 100 times finer than a human hair, ensure smooth and even wax distribution. This advanced microfiber fabric is a lint free material. Microfiber Applicator Pads are angel hair soft, and completely non-abrasive, so they are safe to use on even the most delicate surfaces.

Speed Master Scrub Brush
Speed Master Scrub Brush is a small, hand held brush perfect for removing staining and other surface contaminants from leather and vinyl surfaces. Made from a polyurethane handle studded with stiff, gray bristles, Speed Master Scrub Brush is the perfect match for those stubbornly stained surfaces. Remove mildew, scrub away stains, and reveal that once-new surface with the Speed Master Scrub Brush.

Cobra Strorm Gray Edgeless Microfiber Polishing Cloths
If you want to get that show car sparkle, you need to go Micro! Microfiber All Purpose Towels are spun from an 80/20 polyester/polyamide blend, producing a highly refined microfiber. The microscopic polyester/polyamide fibers are split with a unique process that creates a every soft, absorbent texture.

Kit includes:
32 oz. BLACKFIRE Leather Complete
1 Microfiber Applicator Pads
1 Speed Master Scrub Brush
3 16x16"" Cobra Strorm Gray Edgeless Microfiber Polishing Cloths

A total retail value of $53.94. You save $15.95! "|"BLACKFIRE Leather Complete Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-leather-conditioner|BF-400|CUSTOM-ITEM|"BLACKFIRE Leather Conditioner"|"http://www.blackfirewax.com/blackfire-leather-conditioner.html"|(34.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

For when your leather needs to be renourished!

BLACKFIRE Leather Conditioner keeps leather soft with state-of-the-art breathable polymers. Extreme UV protection resists leather yellowing and photo oxidation. The non-slick, satin finish created by Leather Conditioner resists abrasion, arming your car’s leather seats against daily wear and tear. In addition, BLACKFIRE Leather Conditioner leaves a moisture barrier to prevent moisture from breaking down leather or stitching.

BLACKFIRE Leather Conditioner was developed to offer state-of-the-art UV protection plus a breathable moisture barrier that also guards against wear and abrasion. Sound like a tall order? It was, but BLACKFIRE’s chemist made it happen and now your vehicle reaps the benefits.

BLACKFIRE Leather Conditioner penetrates deep into your leather for a conditioned, but not greasy, finish.

To resist perspiration, salt, skin oil, and lotion stains, our chemist selected a co-polymer recently developed by Dow Corning. This co-polymer cross-links with itself to provide a blanket of protection on top of the leather. It blocks moisture yet still allows air flow through the coating to facilitate heat dissipation. For UV protection, BLACKFIRE’s chemist went all the way to Switzerland to CIBA, the maker of TINUVIN 5151. The result is a product that offers the best in leather protection and is also non-greasy, dries almost on contact to a matte finish, and isn't slippery.

To pack the maximum amount of conditioning oils, protective polymers and UV-absorbers in the formula, it had to be a rich cream. BLACKFIRE Leather Conditioner is like applying a moisturizing lotion to your leather seats.

 

Directions:

For best results using, thoroughly clean surface first using BlACKFIRE Interior Cleaner.  Apply a dime-size amount of BLACKFIRE Leather Conditioner onto a foam or microfiber applicator and thoroughly massage into the leather. Allow lotion to penetrate for several seconds. Then lightly buff with a microfiber towel to remove any excess. 

This product is not recommended on perforated leathers as it could clog the pores. Do not use on napped leathers such as suede.

32 oz.

"|""|""|""|""|""|""|""|"(:BLACKFIRE-LEATHER)"|""||""|""|""|""|""|""||0| blackfire-leather|BF-400-128|CUSTOM-ITEM|"BLACKFIRE Leather Conditioner 128 oz."|"http://www.blackfirewax.com/blackfire-leather.html"|(79.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

For when your leather needs to be renourished!

BLACKFIRE Leather Conditioner keeps leather soft with state-of-the-art breathable polymers. Extreme UV protection resists leather yellowing and photo oxidation. The non-slick, satin finish created by Leather Conditioner resists abrasion, arming your car’s leather seats against daily wear and tear. In addition, BLACKFIRE Leather Conditioner leaves a moisture barrier to prevent moisture from breaking down leather or stitching.

BLACKFIRE Leather Conditioner was developed to offer state-of-the-art UV protection plus a breathable moisture barrier that also guards against wear and abrasion. Sound like a tall order? It was, but BLACKFIRE’s chemist made it happen and now your vehicle reaps the benefits.

BLACKFIRE Leather Conditioner penetrates deep into your leather for a conditioned, but not greasy, finish.

To resist perspiration, salt, skin oil, and lotion stains, our chemist selected a co-polymer recently developed by Dow Corning. This co-polymer cross-links with itself to provide a blanket of protection on top of the leather. It blocks moisture yet still allows air flow through the coating to facilitate heat dissipation. For UV protection, BLACKFIRE’s chemist went all the way to Switzerland to CIBA, the maker of TINUVIN 5151. The result is a product that offers the best in leather protection and is also non-greasy, dries almost on contact to a matte finish, and isn't slippery.

To pack the maximum amount of conditioning oils, protective polymers and UV-absorbers in the formula, it had to be a rich cream. BLACKFIRE Leather Conditioner is like applying a moisturizing lotion to your leather seats.

 

Directions:

For best results using, thoroughly clean surface first using BlACKFIRE Interior Cleaner. Apply a dime-size amount of BLACKFIRE Leather Conditioner onto a foam or microfiber applicator and thoroughly massage into the leather. Allow lotion to penetrate for several seconds. Then lightly buff with a microfiber towel to remove any excess.

This product is not recommended on perforated leathers as it could clog the pores. Do not use on napped leathers such as suede.

32 oz.

"|""|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-400-duo|BF-400-128-P|CUSTOM-ITEM|"BLACKFIRE Leather Conditioner Duo Pack"|"https://www.blackfirewax.com/bf-400-duo.html"|(114.98)|(59.99)|T|""|""|""|""|""|"

BLACKFIRE Leather Conditioner keeps leather soft with state-of-the-art breathable polymers. Extreme UV protection resists leather yellowing and photo oxidation. The non-slick, satin finish created by Leather Conditioner resists abrasion, arming your car’s leather seats against daily wear and tear. In addition, BLACKFIRE Leather Conditioner leaves a moisture barrier to prevent moisture from breaking down leather or stitching.

BLACKFIRE Leather Conditioner was developed to offer state-of-the-art UV protection plus a breathable moisture barrier that also guards against wear and abrasion. Sound like a tall order? It was, but BLACKFIRE’s chemist made it happen and now your vehicle reaps the benefits.

BLACKFIRE Leather Conditioner penetrates deep into your leather for a conditioned, but not greasy, finish.

To resist perspiration, salt, skin oil, and lotion stains, our chemist selected a co-polymer recently developed by Dow Corning. This co-polymer cross-links with itself to provide a blanket of protection on top of the leather. It blocks moisture yet still allows air flow through the coating to facilitate heat dissipation. For UV protection, BLACKFIRE’s chemist went all the way to Switzerland to CIBA, the maker of TINUVIN 5151. The result is a product that offers the best in leather protection and is also non-greasy, dries almost on contact to a matte finish, and isn't slippery.

To pack the maximum amount of conditioning oils, protective polymers and UV-absorbers in the formula, it had to be a rich cream. BLACKFIRE Leather Conditioner is like applying a moisturizing lotion to your leather seats.

 

Directions:

For best results using, thoroughly clean surface first using BlACKFIRE Interior Cleaner.  Apply a dime-size amount of BLACKFIRE Leather Conditioner onto a foam or microfiber applicator and thoroughly massage into the leather. Allow lotion to penetrate for several seconds. Then lightly buff with a microfiber towel to remove any excess. 

This product is not recommended on perforated leathers as it could clog the pores. Do not use on napped leathers such as suede.

32 oz.

"|"BLACKFIRE Leather Conditioner Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-interior-kit|BF-5050|CUSTOM-ITEM|"BLACKFIRE Leather Kit"|"http://www.blackfirewax.com/blackfire-interior-kit.html"|(118.44)|(71.99)|T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"Make what’s inside your car count with BLACKFIRE interior care!

BLACKFIRE’s surface-safe formulas lift dirt and oils without deteriorating fibers or drying out plastics. The BLACKFIRE Leather Kit makes the inside of your vehicle look as good as the outside!

32 oz. BLACKFIRE Interior Protectant
BLACKFIRE Interior Protectant with Polycharger is the only product you need to maintain the look and feel of leather and soft vinyl upholstery. This 100% water based protectant uses micro-engineered polymers that are readily accepted by leather and soft vinyl. BLACKFIRE Interior Protectant contains no oils, silicones, or petroleum distillates. It leaves a deep, satin, natural-looking finish on interior auto surfaces. After treatment, a micro-fine moisture barrier remains on the surface to resist perspiration stains and help retard UV-induced fading.

32 oz. BLACKFIRE Interior Cleaner
BLACKFIRE Interior Cleaner is a versatile, water-based cleaner for all leather, vinyl, velour, carpet, headliner fabric, wood, plastic, and metal. It is designed to be both gentle and effective, and it contains no harmful ingredients. BLACKFIRE Interior Cleaner uses Swedish non-ionic surfactants to safely clean all interior surfaces. BLACKFIRE Interior Cleaner is a 100% water-based multi-material cleaner. It contains no acids, no butyl of any kind, and no petroleum distillates. If a material can be cleaned with water, it can be cleaned with BLACKFIRE Interior Cleaner.

32 oz. BLACKFIRE Leather Conditioner
BLACKFIRE Leather Conditioner keeps leather soft with state-of-the-art breathable polymers. Extreme UV protection resists leather yellowing and photo oxidation. The non-slick, satin finish created by Leather Conditioner resists wear and abrasion, arming your car’s leather seats against daily wear and tear. In addition, BLACKFIRE Leather Conditioner leaves a moisture barrier to prevent moisture from breaking down leather or stitching. BLACKFIRE Leather Conditioner is like applying a moisturizing lotion to your leather seats.

2 All Purpose Microfiber Towels, 16 x 16 inches (color may vary)
Use these microfiber detailing towels for drying, buffing, or as a finishing wipe down. Microfiber is designed to be light, strong, super-absorbent and quick drying. The fibers are non-abrasive, and are woven so tightly that it’s absolutely lint free and extremely durable. Unbelievably, these ultra-tough fibers are engineered to absorb seven times their weight in moisture.

Leather and Vinyl Scrub Brush
Use this brush to remove deep down dirt and stains from vinyl and leather. Yes, you can scrub these materials and get impressive results. Get a secure grip with this multi-use wood handled hand brush.

Famous Detailing Brush
Use our Famous Detailing Brush once and you’ll wonder how you ever detailed your vehicle without it. This functional brush excels for every detailing task, including wheel cleaning, interior dusting, wax removal from emblems, and anything else you can think of. The top-quality construction means the brush will last several years, even when used regularly with high-octane wheel cleaners. You will be hard pressed to find a brush of this quality for less than $15.

3 Microfiber Applicator Pads
The gentle yet strong fabric is wrapped snuggly around plush, absorbent sponges. This innovative combination of materials causes wax, polish, dressings, and sealants to spread more evenly, resulting in maximum coverage while using less emulsion.

Each kit contains:
32 oz. BLACKFIRE Interior Protectant
32 oz. BLACKFIRE Interior Cleaner
32 oz. BLACKFIRE Leather Conditioner
2 All Purpose Microfiber Towels (color may vary)
Wood Grip Scrub Brush
Famous Detailing Brush
3 Microfiber Applicator Pads (color may vary)

Retail value of the kit is $118.44, giving you a savings of $28.45!"|"BLACKFIRE Leather Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-mat-cleaner-protectant|BF-165|CUSTOM-ITEM|"BLACKFIRE Mat Cleaner & Protectant 32 oz."|"https://www.blackfirewax.com/blackfire-mat-cleaner-protectant.html"|(19.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Just because it’s where you rest your feet doesn’t mean it shouldn’t be kept neat!

BLACKFIRE Mat Cleaner & Protectant is the solution to those dull, dirty, and dingy, floormats that you have been step all over! All the common types of debris and contamination that plague floormats are easily and effectively removed with the use of BLACKFIRE Mat Cleaner & Protectant. Dirt, mud, road salt, snow, beverages, and many more will all be swiftly broken down by the thorough cleaner agents contained in BLACKFIRE Mat Cleaner & Protectant. You can’t stop your floormats from getting messy, but that doesn’t mean you have to keep them that way!

---

---

There are a few spaces in your interior that are not usually paid that much attention while you or others are riding in your car. Those being the space under your car seats, the underside of your glove compartment, and your floormats. However, just because they are not noticed OFTEN, does not mean the are NEVER noticed. These areas also still manage to collect dirt, contamination, and mess just as often though. And none more so than your floormats! Your floormats, in fact, probably see the most mess out of any other space in your interior, so cleaning and caring for them is a crucial part of your interior detailing routine. In case that seems like too daunting of a task to manage, BLACKFIRE Mat Cleaner & Protectant will make it less of job and more of a joy!

---

---

Whenever you plant yourself in the seat of your car, you are simultaneously planting a slew of contamination, debris, and mess on the surface of your floor mats. Everything that your shoes have trodden through that day is knocked loose and left to sit on the surface of your floormats to collect. Just think about all the things you step in on a daily basis! Dirt, mud, road salt, sand, grass, gum, snow, rain, sleet, and many, MANY more! All of these wind up all in the same place, your floormats. Thankfully, BLACKFIRE Mat Cleaner & Protectant is formulated using potent cleaner agents that are capable of quickly and effectively breaking down any and all of the messes listed above and many others!

---

---

Now, because we now know just how much mess your floormats collect, it seems likely that even with the best floormat cleaner out there, you will still have to constantly be cleaning your floormats just to keep them looking nice. And that is absolutely correct, if you are ONLY using is a cleaner. However, BLACKFIRE Mat Cleaner & Protectant is not JUST a cleaner! BLACKFIRE Mat Cleaner & Protectant also happens to create a barrier of protection on the surface of your mats as it cleans the mess away! This barrier will prevent things like dust, dirt, and liquids from sticking to the surface of your mats, keeping them cleaner for longer and making them much easier to clean again when that time does eventually come!

Your floormats always make sure to protect the floor of your car, now it’s time that YOU protect THEM!

Directions for Use:
Spray directly onto vinyl or rubber floor mat or liner.
Using a brush or towel, agitate the formula into the mat or liner.
Wipe away with fresh towel.

32 oz. "|"BLACKFIRE Mat Cleaner & Protectant - 32 oz."|""|""|""|""|""|""|"(:BLACKFIRE-MAT-CLEANER-PROTECTANT-5-GALLON)"|""||""|""|""|""|""|""||0| blackfire-mat-cleaner-protectant-5-gallon|BF-165-5G|CUSTOM-ITEM|"BLACKFIRE Mat Cleaner & Protectant 5 Gallon"|"https://www.blackfirewax.com/blackfire-mat-cleaner-protectant-5-gallon.html"|(199.99)||T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"Just because it’s where you rest your feet doesn’t mean it shouldn’t be kept neat!

BLACKFIRE Mat Cleaner & Protectant is the solution to those dull, dirty, and dingy, floormats that you have been step all over! All the common types of debris and contamination that plague floormats are easily and effectively removed with the use of BLACKFIRE Mat Cleaner & Protectant. Dirt, mud, road salt, snow, beverages, and many more will all be swiftly broken down by the thorough cleaner agents contained in BLACKFIRE Mat Cleaner & Protectant. You can’t stop your floormats from getting messy, but that doesn’t mean you have to keep them that way!

---

---

There are a few spaces in your interior that are not usually paid that much attention while you or others are riding in your car. Those being the space under your car seats, the underside of your glove compartment, and your floormats. However, just because they are not noticed OFTEN, does not mean the are NEVER noticed. These areas also still manage to collect dirt, contamination, and mess just as often though. And none more so than your floormats! Your floormats, in fact, probably see the most mess out of any other space in your interior, so cleaning and caring for them is a crucial part of your interior detailing routine. In case that seems like too daunting of a task to manage, BLACKFIRE Mat Cleaner & Protectant will make it less of job and more of a joy!

---

---

Whenever you plant yourself in the seat of your car, you are simultaneously planting a slew of contamination, debris, and mess on the surface of your floor mats. Everything that your shoes have trodden through that day is knocked loose and left to sit on the surface of your floormats to collect. Just think about all the things you step in on a daily basis! Dirt, mud, road salt, sand, grass, gum, snow, rain, sleet, and many, MANY more! All of these wind up all in the same place, your floormats. Thankfully, BLACKFIRE Mat Cleaner & Protectant is formulated using potent cleaner agents that are capable of quickly and effectively breaking down any and all of the messes listed above and many others!

---

---

Now, because we now know just how much mess your floormats collect, it seems likely that even with the best floormat cleaner out there, you will still have to constantly be cleaning your floormats just to keep them looking nice. And that is absolutely correct, if you are ONLY using is a cleaner. However, BLACKFIRE Mat Cleaner & Protectant is not JUST a cleaner! BLACKFIRE Mat Cleaner & Protectant also happens to create a barrier of protection on the surface of your mats as it cleans the mess away! This barrier will prevent things like dust, dirt, and liquids from sticking to the surface of your mats, keeping them cleaner for longer and making them much easier to clean again when that time does eventually come!

Your floormats always make sure to protect the floor of your car, now it’s time that YOU protect THEM!

Directions for Use:
Spray directly onto vinyl or rubber floor mat or liner.
Using a brush or towel, agitate the formula into the mat or liner.
Wipe away with fresh towel.

5 gallons (640 oz.) "|"BLACKFIRE Mat Cleaner & Protectant 5 Gallon"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-mat-cleaner-protectant-bundle|BF-165MFC|CUSTOM-ITEM|"BLACKFIRE Mat Cleaner & Protectant Bundle"|"https://www.blackfirewax.com/bf-mat-cleaner-protectant-bundle.html"|(30.98)|(24.99)|T|""|""|""|""|""|"Your floor mats are going to thank you!

Your mats aren't going to know what hit them when you bust out the BLACKFIRE Mat Cleaner & Protectant Bundle! Prepare to have fresh, clean, and protected mats that will resist all types of contamination without the extra fuss and muss and the added trust of the BLACKFIRE that you know and love.

BLACKFIRE Mat Cleaner & Protectant
BLACKFIRE Mat Cleaner & Protectant is the solution to those dull, dirty, and dingy, floormats that you have been step all over! All the common types of debris and contamination that plague floormats are easily and effectively removed with the use of BLACKFIRE Mat Cleaner & Protectant. Dirt, mud, road salt, snow, beverages, and many more will all be swiftly broken down by the thorough cleaner agents contained in BLACKFIRE Mat Cleaner & Protectant. You can’t stop your floor mats from getting messy, but that doesn’t mean you have to keep them that way!

Grey All-Purpose Microfiber Towels - 3 Pack
These All-Purpose Microfiber Towels are safe on glass, paint, clear coat, and any other surface. For general cleaning in and around your garage and vehicle, you can’t beat the value.

Kit Includes:
BLACKFIRE Mat Cleaner & Protectant 32 oz.
(3) Grey All-Purpose Microfiber Towels

A savings of $5.99! "|"BLACKFIRE Mat Cleaner & Protectant Bundle"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-mat-cleaner-protectant-kit|BF-165CPK|CUSTOM-ITEM|"BLACKFIRE Mat Cleaner & Protectant Kit"|"https://www.blackfirewax.com/bf-mat-cleaner-protectant-kit.html"|(35.97)|(24.99)|T|""|""|""|""|""|"Get cleaner mats with an added layer of protection with this BLACKFIRE kit!

BLACKFIRE Mat Cleaner & Protectant Kit features the incomparable BLACKFIRE Mat Cleaner & Protectant! You'll never worry about your vinyl or rubber floor mats with the BLACKFIRE Mat Cleaner & Protectant Kit. Keep your mind and mats at ease with cleaning properties and protection that only BLACKFIRE can give you with the BLACKFIRE Mat Cleaner & Protectant Kit!

BLACKFIRE Mat Cleaner & Protectant
BLACKFIRE Mat Cleaner & Protectant is the solution to those dull, dirty, and dingy, floormats that you have been step all over! All the common types of debris and contamination that plague floormats are easily and effectively removed with the use of BLACKFIRE Mat Cleaner & Protectant. Dirt, mud, road salt, snow, beverages, and many more will all be swiftly broken down by the thorough cleaner agents contained in BLACKFIRE Mat Cleaner & Protectant. You can’t stop your floormats from getting messy, but that doesn’t mean you have to keep them that way!

Mat & Carpet Cleaner Scrub Brush
More than your standard issue scrub brush, this one is a powerhouse against inevitable spills and ground in dirt underfoot because of its superior quality. Your carpets and mats are one of the most visible, yet hardest to maintain parts of the car. The right tool, with the right product will help you keep your mats looking their best.

Grey All-Purpose Microfiber Towels - 3 Pack
These All-Purpose Microfiber Towels are safe on glass, paint, clear coat, and any other surface. For general cleaning in and around your garage and vehicle, you can’t beat the value.

Kit Includes:
BLACKFIRE Mat Cleaner & Protectant 32 oz.
Mat & Carpet Scrub Brush
(3) Grey All-Purpose Microfiber Towels

A savings of $10.98!"|"BLACKFIRE Mat Cleaner & Protectant Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-matte-detail-spray|BF-675|CUSTOM-ITEM|"BLACKFIRE Matte Detail Spray"|"https://www.blackfirewax.com/blackfire-matte-detail-spray.html"|(21.99)||T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"Detailing matte matters!

BLACKFIRE Matte Detail Spray is specially formulated for flat matte finishes. Matte cars require a unique formula to keep their surfaces looking their best. BLACKFIRE Matte Detail Spray is the one to remove dirt, dust and other debris from the surface, while providing protection that won’t damage the matte finish. BLACKFIRE Matte Detail Spray is safe to use on matte wheels, vinyl decals and other matte finished surfaces. Plus, it is easy-to-use!

---

---

Matte cars are very unique, not being as common as regularly painted cars. Although not as many people have matte cars, it does not mean those people don’t want to keep those matte cars perfectly detailed. Even matte surfaces need to be cleaned and protected!

BLACKFIRE Matte Detail Spray is specifically designed for flat matte finishes. These finishes can include surfaces, wheels and even decals. You can’t always easily clean a matte car with just any product, thanks to its exclusive texture, but with BLACKFIRE Matte Detail Spray, you can quickly remove contaminants all in the form of a spray bottle.

---

Simply spray a liberal amount of BLACKFIRE Matte Detail Spray directly onto your matte surface.		Then just buff it off with a clean microfiber towel and enjoy the clean and protected matte finish!

---

Just because a matte surface is a special texture, it doesn’t mean it can’t be cleaned. BLACKFIRE Matte Detail Spray will easily remove dirt, dust and debris particles from the surface, all without damaging the finish. Once the contaminants have been removed from the surface, BLACKFIRE Matte Detail Spray will leave behind a layer of protection. This protection will keep the flat, satin, sheen integrity of the matte finish without negatively affecting surface in any way.

Cleaning and protecting a matte surface is as easy as can be with the BLACKFIRE Matte Detail Spray. All you have to do to use this detailing product is spray on the surface you wish to detail and the buff the surface with a clean microfiber towel. Save time, energy and money from having multiple matte cleaning products, and just use BLACKFIRE Matte Detail Spray.

DIRECTIONS:
*Can be used on any matte finish*
-Spray BLACKFIRE Matte Detail Spray directly onto the surface to be detailed.
-Using a clean microfiber buffing towel, gently buff the surface.
-Flip the towel and buff away any excess product away.
-Continue around the entire vehicle.

32 oz. "|"BLACKFIRE Matte Detail Spray"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-matte-maker-kit|BF-MM-KIT|CUSTOM-ITEM|"BLACKFIRE Matte-Maker Kit"|"https://www.blackfirewax.com/blackfire-matte-maker-kit.html"|(35.95)|(21.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|" The easy way to a clean matte finish!

Matte cars are unique, so you must treat them as such. But just because they are unique doesn’t mean they can’t be clean. BLACKFIRE Matte-Maker kit features the basics needed to make you matte look as good as new. BLACKFIRE Matte Detail Spray is designed to flat matte finishes, to remove contaminants without harm. Remove any remaining residue with one of the Storm Gray Edgeless Microfiber Polishing Cloths. The cloths edgeless design will prevent scratching.

Items in this kit:

BLACKFIRE Matte Detail Spray
BLACKFIRE Matte Detail Spray is specially formulated for flat matte finishes. Matte cars require a unique formula to keep their surfaces looking their best. BLACKFIRE Matte Detail Spray is the one to remove dirt, dust and other debris from the surface, while providing protection that won’t damage the matte finish. BLACKFIRE Matte Detail Spray is safe to use on matte wheels, vinyl decals and other matte finished surfaces. Plus, it is easy-to-use!

Storm Gray Edgeless Microfiber Polishing Cloth
The Storm Gray Microfiber Polishing Cloth is woven specifically for wax and polish removal. It has a soft touch that is extra gentle on sensitive clear coat finishes. Plus, the cloth has no edges, making accidental scratches virtually impossible. Use this cloth the next time you wax your vehicle and I promise you’ll never use anything else!

Kit includes
1 32 oz. BLACKFIRE Matte Detail Spray
4 16""x16” Storm Gray Edgeless Microfiber Polishing Cloth

A total retail value of $35.95. Save $13.96! "|"BLACKFIRE Matte-Maker Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-metal-clean-polish-protection-kit|BF-MCPP-KIT|CUSTOM-ITEM|"BLACKFIRE Metal Clean, Polish and Protection Kit"|"https://www.blackfirewax.com/bf-metal-clean-polish-protection-kit.html"|(99.92)|(74.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|" Wash, Polish, Protect!

Washing, shining and protecting your car has never been so simple with the BLACKFIRE Metal Clean, Polish and Protection Kit. The BLACKFIRE Waterless Wash is the first step in this kit’s detailing process. The waterless wash gives you the powerful cleaning action you’d expect from BLACKFIRE’s polymers, all without the need for water. Move on to the BLACKFIRE Metal Polish and BLACKFIRE Metal Sealant for extreme metal shine and protection. The BLACKFIRE Metal Polish corrects your car from the lingering effects of oxidation, rust, corrosion and other harmful defects. BLACKFIRE Metal Sealant keeps your metal looking sharp by creating a barrier of protection between your car’s metal and environmental hazards. The Microfiber Applicator Pad and the Foam Applicator Pad allows for different but effective product application techniques, both allowing for an even product process. Not one, but two types of towels will help bring your car to its finished, perfected state. Avoid cross-contamination with the extremely useful Shine & Buff Waterless Wash Towel. It is dual sided for double the cleaning action, the gray side for the initial swipe and the blue side for the final buff. Plus, with your trusty Edgeless Microfiber Polishing Cloth you can make sure there isn’t any residual residue left on your car and that it’s buffed to its upmost beauty.

---

---

Items in this kit:

BLACKFIRE Waterless Wash
BLACKFIRE Waterless Wash in the ready-to-use spray bottle gives you a powerful ally in keeping your vehicle clean. This high lubricity waterless wash uses BLACKFIRE's proprietary polymers to encapsulate dirt and dust, so they wipe away without scratching. Fingerprints and smudges disappear. Meanwhile, the anti-static polymers bond to the paint to reinforce the existing protection and create a whiplash-inducing shine. BLACKFIRE Waterless Wash is a car wash in a spray bottle!

BLACKFIRE Metal Polish
After detailing your car to near perfection, all that’s left is to shine up the metal portions. BLACKFIRE Metal Polish restores metal to its original finish and leaves the area haze free. Oxygen is impossible to resist, but with the BLACKFIRE Metal Polish, you can quickly remove the lingering effects of oxidization. Rust, corrosion, fine scratches and other defects are no match for the BLACKFIRE Metal Polish, which is safe to use on aluminum, chrome and stainless-steel finishes. This product is easy to use and leaves your metal surfaces shining with brilliance.

BLACKFIRE Metal Sealant
Show your metal some love with the BLACKFIRE Metal Sealant. BLACKFIRE Metal Sealant provides top of the line protection to your metal surface from corrosion, scratches, the effects of UV light and other problematic wear and tear. This revolutionary acrylic-based formula keeps your metal bright, shiny and new with just this one bottle. Fading and dullness are no longer an issue, with the formula keeping your metal bright for up to six months!

Microfiber Applicator Pad
With over 200,000 strands of advanced microfibers per square inch, nothing matches its ability to remove dirt, residues, and surface oxidation. An 80/20 polyester/polyamide blend of “split” weave fibers, 100 times finer than a human hair, ensure smooth and even wax distribution. This advanced microfiber fabric is a lint free material. Microfiber Applicator Pads are angel hair soft, and completely non-abrasive, so they are safe to use on even the most delicate surfaces.

Foam Applicator Pad
Perhaps the most utilized waxing tool of all times, the traditional foam wax applicator is definitely a staple among the car buff’s arsenal. This durable little guy withstands wax after wax after wax and still delivers unbeatable results.

Shine and Buff Waterless Wash Towel
The Shine & Buff Waterless Wash Towel is a thick, double-sided (gray/blue) towel that was designed specifically for performing a waterless wash on your car, truck, van, boat or RV. The nap, border, weight and overall design of this towel are tailored to suit the needs of waterless wash fanatics. From its thick nap that traps dirt and grime to the scratch-free silk border, the Shine & Buff Waterless Wash Towel answers one of the most frequently asked questions in car care and detailing – “what’s the best towel for waterless washes?”.

Carbon Black Edgeless Microfiber Polishing Cloth
The Carbon Black Microfiber Polishing Cloth is woven specifically for wax and polish removal. It has a soft touch that is extra gentle on sensitive clear coat finishes. Plus, the cloth has no edges, making accidental scratches virtually impossible. Use this cloth the next time you wax your vehicle and I promise you’ll never use anything else!

Kit includes
1 x 32 oz. BLACKFIRE Waterless Wash
1 x 16 oz. BLACKFIRE Metal Polish
1 x 16 oz. BLACKFIRE Metal Sealant
1 x Microfiber Applicator Pad
1 x Foam Applicator Pad
1 x Shine & Buff Waterless Wash Towel
2 x 16” x 16” Carbon Black Edgeless Microfiber Polishing Cloth

A total retail value of $91.92. Save $21.93! "|"BLACKFIRE Metal Clean, Polish and Protection Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-metal-polish|BF-530|CUSTOM-ITEM|"BLACKFIRE Metal Polish 16 oz."|"https://www.blackfirewax.com/blackfire-metal-polish.html"|(22.99)||T|"BLACKFIRE Car CAre"|"BLACKFIRE Car CAre"|""|""|""|"The polish you want for a metallic shine

After detailing your car to near perfection, all that’s left is to shine up the metal portions. BLACKFIRE Metal Polish restores metal to its original finish and leaves the area haze free. Oxygen is impossible to resist, but with the BLACKFIRE Metal Polish, you can quickly remove the lingering effects of oxidization. Rust, corrosion, fine scratches and other defects are no match for the BLACKFIRE Metal Polish, which is safe to use on aluminum, chrome and stainless-steel finishes. This product is easy to use and leaves your metal surfaces shining with brilliance.



Metal polishing can be a rough job. Sometimes just by looking at the metal parts of your car you wonder if it’s even possible to rid yourself of the rust and corrosion. Will the metal ever gleam again? Not to mention, the metal areas tend to be in uncomfortable places that you almost don’t want to bother with. But with the triple action power of BLACKFIRE Metal Polish, you’ll wonder why you didn’t use this product from the start. If it weren’t obvious enough, oxygen is all around us. So, unless you are keeping your vehicle in outer space, your car will eventually suffer for oxidization. Sunlight is also a factor in oxidization. Oxidization is harmful to your car cosmetically, fading and dulling the paint, trim and metals. The heavy-duty power of the BLACKFIRE Metal Polish fights the effects oxidation, restoring your vehicle’s metal surfaces to its original glory. The powerfully formulated chemicals of BLACKFIRE Metal Polish also liberate your metal surfaces of corrosion and fine scratches.



Your car, motorcycle, trailer or whatever metal you have that needs polishing, is in good hands when it comes to using the BLACKFIRE Metal Polish. This product is VOC-compliant, so it is safe for you and the environment, but is still tough on metal. This metal polish can be used on aluminum, chrome and stainless steel. When it comes to shine, stainless steel tends to be the hardest to brighten up. The BLACKFIRE Metal Polish is uniquely designed to make stainless steel shine, while at the same time defends chrome against rust and oxidization off aluminum. All your metal surfaces with have a facet of the BLACKFIRE Metal Polish at its defense. Some polishes tend to leave a hazy, ghostly finish. With the BLACKFIRE Metal Polish, you don’t have to worry about having a cloudy result after spending a good deal of time thinking you were buffing the area clear. This process is all done without the use of heavy solvents! Get ready for metal so clear, your reflection shines through!



One of the best factors about BLACKFIRE Metal Polish is how easy it is to use and how little product you need to see results. To use, all you need is to apply the product to a foam or microfiber applicator (by hand or machine) and work onto the metal surface. Wait till you see a little haze before wiping off the polish. A little goes a long way with this metal polish, all you need is a pea-sized amount bring your metals back to life. Saving you product and money!

DIRECTIONS:
BLACKFIRE Metal Polish can be used by hand or machine. Apply to cool surfaces, out of direct sunlight. Shake well before use.

For use by hand:

-Apply a pea-size drop of product onto a microfiber or foam applicator pad and work into the surface.
-Allow to dry to a haze before buffing away with a clean microfiber towel. For use by machine:

-Apply a pea-size amount of product to a foam polishing pad or wheel polishing tool (if applicable).

-Work into the surface using a slow speed and medium pressure.
-Allow to haze before buffing away with a clean microfiber towel.

-Depending on severity of contamination, multiple applications may be required.

16 oz. "|"BLACKFIRE Metal Polish 16 oz."|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-metal-polish-sealant-buff-ball-kit|BF-MPS-BBKIT|CUSTOM-ITEM|"BLACKFIRE Metal Polish and Sealant Buff Ball Kit"|"https://www.blackfirewax.com/bf-metal-polish-sealant-buff-ball-kit.html"|(89.94)|(69.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|" Buff, buff, buff it out!

Make your metal shine with the BLACKFIRE Metal Polish and Sealant Buff Ball Kit. The BLACKFIRE Metal Polish shines your metal to its ultimate prime while leaving it haze free and fighting scratching, oxidation and other environmental hazards. Keep the metal looking sleek for months to come with the BLACKFIRE Metal Sealant. The meatal sealant creates a protective and durable barrier from environmental contaminates to your car’s surface. Grab your favorite polisher and attach the Flitz 5” Buff Ball for a quick and efficient polishing job that can be used on all metal surfaces. The Foam Applicator Pad allows for a smooth application of product and the Edgeless Microfiber Polishing Cloth lets you clean off any remaining residue without marring the surface.

---

---

Items in this kit:

BLACKFIRE Metal Polish
After detailing your car to near perfection, all that’s left is to shine up the metal portions. BLACKFIRE Metal Polish restores metal to its original finish and leaves the area haze free. Oxygen is impossible to resist, but with the BLACKFIRE Metal Polish, you can quickly remove the lingering effects of oxidization. Rust, corrosion, fine scratches and other defects are no match for the BLACKFIRE Metal Polish, which is safe to use on aluminum, chrome and stainless-steel finishes. This product is easy to use and leaves your metal surfaces shining with brilliance.

BLACKFIRE Metal Sealant
Show your metal some love with the BLACKFIRE Metal Sealant. BLACKFIRE Metal Sealant provides top of the line protection to your metal surface from corrosion, scratches, the effects of UV light and other problematic wear and tear. This revolutionary acrylic-based formula keeps your metal bright, shiny and new with just this one bottle. Fading and dullness are no longer an issue, with the formula keeping your metal bright for up to six months!

Flitz Buff Ball
Cut your work time in half! The Flitz Large Büff Ball cleans/polishes in minutes, what otherwise would take hours. Keep wheels, diamond plate and more shining, without a lot of hand labor. The Flitz Large Büff Ball will buff out scuffs, oxidation, tarnish, brake dust, pitting, corrosion on ALL metals, painted surfaces, fiberglass, plastics, eisenglass, and wood. It works great on textured or smooth surfaces.

Foam Applicator Pad
Perhaps the most utilized waxing tool of all times, the traditional foam wax applicator is definitely a staple among the car buff’s arsenal. This durable little guy withstands wax after wax after wax and still delivers unbeatable results.

Carbon Black Edgeless Microfiber Polishing Cloth
The Carbon Black Microfiber Polishing Cloth is woven specifically for wax and polish removal. It has a soft touch that is extra gentle on sensitive clear coat finishes. Plus, the cloth has no edges, making accidental scratches virtually impossible. Use this cloth the next time you wax your vehicle and I promise you’ll never use anything else!

Kit includes
1 x 16 oz. BLACKFIRE Metal Polish
1 x 16 oz. BLACKFIRE Metal Sealant
1 x 5” Flitz Buff Ball, Large
1 x Foam Applicator Pad
2 x 16” x 16” Carbon Black Edgeless Microfiber Polishing Cloth

A total retail value of $89.94. Save $19.95! "|"BLACKFIRE Metal Polish and Sealant Buff Ball Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-metal-polish-sealant-combo|BF-MPS-KIT|CUSTOM-ITEM|"BLACKFIRE Metal Polish and Sealant Combo"|"https://www.blackfirewax.com/blackfire-metal-polish-sealant-combo.html"|(63.94)|(47.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|" Polish, seal and be ready to go!

Polish, seal and protect all in one kit! BLACKFIRE is helping keep your metal look brand spanking new with the BLACKFIRE Metal Polish and BLACKFIRE Metal Sealant. The BLACKFIRE Metal Polish restores your metal back its original luster and fixes off the lingering effect of oxidation, rust, corrosion and fine scratches. BLACKFIRE Metal Sealant protects the Metal Polish’s handwork, evening cleaning up and residual residue and leaves the metal surface protected from future harm. Use either the soft Microfiber Applicator Pad or the Foam Applicator Pad to apply your product evenly and thoroughly. Then follow it up with a good buff from a soft and powerful Edgeless Microfiber towel, without the fear of marring your surface.

---

---

Items in this kit:

BLACKFIRE Metal Polish
After detailing your car to near perfection, all that’s left is to shine up the metal portions. BLACKFIRE Metal Polish restores metal to its original finish and leaves the area haze free. Oxygen is impossible to resist, but with the BLACKFIRE Metal Polish, you can quickly remove the lingering effects of oxidization. Rust, corrosion, fine scratches and other defects are no match for the BLACKFIRE Metal Polish, which is safe to use on aluminum, chrome and stainless-steel finishes. This product is easy to use and leaves your metal surfaces shining with brilliance.

BLACKFIRE Metal Sealant
Show your metal some love with the BLACKFIRE Metal Sealant. BLACKFIRE Metal Sealant provides top of the line protection to your metal surface from corrosion, scratches, the effects of UV light and other problematic wear and tear. This revolutionary acrylic-based formula keeps your metal bright, shiny and new with just this one bottle. Fading and dullness are no longer an issue, with the formula keeping your metal bright for up to six months!

Carbon Black Edgeless Microfiber Polishing Cloth
The Carbon Black Microfiber Polishing Cloth is woven specifically for wax and polish removal. It has a soft touch that is extra gentle on sensitive clear coat finishes. Plus, the cloth has no edges, making accidental scratches virtually impossible. Use this cloth the next time you wax your vehicle and I promise you’ll never use anything else!

Microfiber Applicator Pad
With over 200,000 strands of advanced microfibers per square inch, nothing matches its ability to remove dirt, residues, and surface oxidation. An 80/20 polyester/polyamide blend of “split” weave fibers, 100 times finer than a human hair, ensure smooth and even wax distribution. This advanced microfiber fabric is a lint free material. Microfiber Applicator Pads are angel hair soft, and completely non-abrasive, so they are safe to use on even the most delicate surfaces.

Foam Applicator Pad
Perhaps the most utilized waxing tool of all times, the traditional foam wax applicator is definitely a staple among the car buff’s arsenal. This durable little guy withstands wax after wax after wax and still delivers unbeatable results.

Kit includes
1 x 16 oz. BLACKFIRE Metal Polish
1 x 16 oz. BLACKFIRE Metal Sealant
2 x 16” x 16” Carbon Black Edgeless Microfiber Polishing Cloth
1 x Microfiber Applicator Pad
1 x Foam Wax Applicators

A total retail value of $63.94. Save $15.95! "|"BLACKFIRE Metal Polish and Sealant Combo"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-metal-polish-essentials-kit|BF-530-ESK|CUSTOM-ITEM|"BLACKFIRE Metal Polish Essentials Kit"|"https://www.blackfirewax.com/blackfire-metal-polish-essentials-kit.html"|(34.97)|(24.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|" Metal never looked so good!

Looking for a quick but effective wheel polishing kit? Afterall, sometimes simplicity is best! The BLACKFIRE Metal Polish Essentials kit has the three components you need for metallic, gleaming wheels. The BLACKFIRE Metal Polish brings your wheels to shiny perfection! BLACKFIRE Metal Polish knocks out oxidization, rust, corrosion and fine scratches, all while leaving a haze free finish. Use a Microfiber Applicator Pad for a soft-to-the-touch but thorough application. Finish off the process with an All Purpose Microfiber Towel that will leave your wheels with a clean, dry finish. Giving your wheels a restoration has never been so simple!

Items in this kit:

BLACKFIRE Metal Polish
After detailing your car to near perfection, all that’s left is to shine up the metal portions. BLACKFIRE Metal Polish restores metal to its original finish and leaves the area haze free. Oxygen is impossible to resist, but with the BLACKFIRE Metal Polish, you can quickly remove the lingering effects of oxidization. Rust, corrosion, fine scratches and other defects are no match for the BLACKFIRE Metal Polish, which is safe to use on aluminum, chrome and stainless-steel finishes. This product is easy to use and leaves your metal surfaces shining with brilliance.

Microfiber Applicator Pad
With over 200,000 strands of advanced microfibers per square inch, nothing matches its ability to remove dirt, residues, and surface oxidation. An 80/20 polyester/polyamide blend of “split” weave fibers, 100 times finer than a human hair, ensure smooth and even wax distribution. This advanced microfiber fabric is a lint free material. Microfiber Applicator Pads are angel hair soft, and completely non-abrasive, so they are safe to use on even the most delicate surfaces.

Grey All Purpose Microfiber Towels
Pick up All Purpose Microfiber Towels in all the available colors to color-code your detailing towels for different detailing jobs! This will prevent cross-contamination and give you a huge supply of quality microfiber!

Kit includes
1 x 16 oz. BLACKFIRE Metal Polish
2 x 4” x 3” Microfiber Applicator Pad
3 x 16” x 16” Grey All Purpose Microfiber Towels

A total retail value of $35.96. Save $5.97! "|"BLACKFIRE Metal Polish Essentials Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-metal-sealant|BF-540|CUSTOM-ITEM|"BLACKFIRE Metal Sealant"|"https://www.blackfirewax.com/blackfire-metal-sealant.html"|(29.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"Get ready for some heavy metal sealing!

Show your metal some love with the BLACKFIRE Metal Sealant. BLACKFIRE Metal Sealant provides top of the line protection to your metal surface from corrosion, scratches, the effects of UV light and other problematic wear and tear. This revolutionary acrylic-based formula keeps your metal bright, shiny and new with just this one bottle. Fading and dullness are no longer an issue, with the formula keeping your metal bright for up to six months!

---

---

Get ready for some heavy metal (sealing)! No need for guitar solos or heading banging here, just the BLACKFIRE Metal Sealant. Metal can make or break a car, both literally and cosmetically... A nice-looking metal bumper or even just an exhaust pipe, can add to the final product of the perfect car. You can polish your metal to perfection, but without the proper sealant, you will just be on your knees polishing again just a few days later. Time for some BLACKFIRE Metal Sealant to save the day!

Part of the beauty of the BLACKFIRE Metal Sealant is the beauty itself. With the BLACKFRIE Metal Sealant your metal will never lose its luster, no matter what the world throws at it. Unlike most metal sealants, this product works not just on bare metal surfaces, but on clear coated and painted ones as well! This product is precisely formulated to have a super high gloss finish. It will make your metal look as bright as the sun, without actually being affected by the sun itself. You can’t have a high gloss shine, without the fear that it will fade or dull. But that fear can be erased with this product because the highly selective polymers know how to protect the shine for the long haul.

This product is made with daily drivers in mind. BLACKFIRE Metal Sealant will have your rims, fender or whatever metal you have, looking sharp. Not only will it look good, but the durability of this metal sealant is almost incomparable in protection. It’s perfect for daily commutes on the highway, back roads and long road trips.

---

Application couldn't be easier!
Simply spread BLACKFIRE Metal Sealant evenly across the surface.		Then, after allowing it to haze, buff off any excess product.

---

Keeping the daily driver in mind, BLACKFIRE knows what the environment can do to your car’s surface and more particularly, your metal surfaces. You’d assume metal is tough, after all, it’s metal, it builds buildings! But metal is just as prone to daily wear and tear as anything else. BLACKFIRE Metal Sealant is acrylic based, meaning it’s superpowered polymers are built to protect. This product shields your metal from multiple kinds of hazardous forces, such as; weathering, salt air, pollution, bug remnants build up and UV deterioration.

When it comes to UV deterioration, BLACKFIRE Metal Sealant is designed to withstand high levels of heat. Withstanding heat is a huge bonus, considering for most drivers, their cars are in the sun 100% of the time. This metal sealant also protects against oxidation, which is one of the leading causes of rust. And who likes rust on their car?

---

BEFORE		AFTER

---

With the BLACKFIRE Metal Sealant all you have to do is apply this product to a finishing pad (whether by hand or machine), apply the pad to the surface and then buff off with a microfiber towel when it’s completely dry. This product almost acts as a two-in-one, as it cleans up any polish residue left behind from your previous detailing step. It conveniently has its own level of light cleaning ability to finish up what the other products may have left. This way, your metal is perfectly clean before it seals and protects. You are typically on your hands and knees for this practice, so its best if you don’t have to do a metal sealing step very often. Luckily, this chemically designed recipe keeps your metal looking shimmery for up to six months. Give your back a break and let BLACKFIRE Metal Sealant do all the work.

DIRECTIONS:

*Do not apply onto a hot surface or in direct sunlight.
*BLACKFIRE Metal Sealant can be applied by hand or by machine.

By hand:
Apply a pea-sized amount of product onto a foam or microfiber applicator and apply a thin layer onto the metal surface. Allow to dry completely before buffing off residue using a clean microfiber towel.

By machine:
Apply several pea-sized drops of product onto a foam polishing or finishing pad and attach to your machine polisher. Spread over the surface before turning your machine onto low and working the product over a 2x2 sq. ft. area. Allow to dry completely before buffing off residue using a clean microfiber towel.

16 oz. "|"BLACKFIRE Metal Sealant"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| -blackfire-microfiber-cleaner|BF-800|CUSTOM-ITEM|"BLACKFIRE Microfiber Cleaner & Restorer"|"http://www.blackfirewax.com/-blackfire-microfiber-cleaner.html"|(17.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"Twin-neck bottle features built-in measuring cup!

BLACKFIRE Microfiber Cleaner & Restorer is formulated to meet the unique cleaning requirements of microfiber. It releases oily residues and greasy stains better than an ordinary laundry detergent and leaves microfiber feeling like new! Even better, BLACKFIRE Microfiber Cleaner & Restorer protects the special characteristics of microfiber - its tremendous absorbency, luxurious softness, and dust-attracting magnetism. Why wash microfiber with anything else?

Microfiber is unlike any other fabric and it deserves a cleaner unlike any other detergent! BLACKFIRE Microfiber Cleaner & Restorer releases tough stains and residues while restoring the softness and cleaning ability that makes microfiber the best detailing material. Microfiber is engineered from man-made fibers to be softer, more durable, and more absorbent than any natural material. BLACKFIRE Microfiber Cleaner & Restorer removes oil, grease, wax and polish residue, protein-based stains like blood and sweat, grass stains, food, and cosmetics while restoring a soft, fluffy feel to the fabric.

BLACKFIRE Microfiber Cleaner & Restorer is HE safe and can be added directly to your load of towels!.

Never use bleach or fabric softeners on microfiber. Bleach can damage fibers over time and it isn't necessary. Fabric softeners eliminate the microfiber's magnetic charge. BLACKFIRE Microfiber Cleaner & Restorer contains only emulsifiers, surfactants, chelating agents and water softeners to break down oily deposits and release them from the fabric. Nothing extra goes into our detergent.

Mild water softeners in BLACKFIRE Microfiber Cleaner & Restorer neutralize hard water in the washing machine to maintain the softness of microfiber. No additional softeners or dryer sheets are needed. Microfiber products will come out of the dryer feeling soft and fluffy. Most importantly, microfiber will retain its cleaning properties wash after wash. In fact, you can use BLACKFIRE Microfiber Cleaner & Restorer to safely clean terry cloth and leather chamois.

Directions:

For best results, always wash microfiber separately from other laundry. Do not use fabric softener, bleach, or dryer sheets. Add 2 ounces of BLACKFIRE Microfiber Cleaner & Restorer to washing machine to clean a half load of microfiber. Add 4 ounces to clean a full load. Tumble dry microfiber on low heat or no heat.

16 oz.

"|""|""|""|""|""|""|""|"(:BLACKFIRE-MICROFIBER-CLEANER-5G)"|""||""|""|""|""|""|""||0| blackfire-microfiber-cleaner-128|BF-800-128|CUSTOM-ITEM|"BLACKFIRE Microfiber Cleaner & Restorer 128 oz."|"http://www.blackfirewax.com/blackfire-microfiber-cleaner-128.html"|(59.99)|||"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"New bottle features built-in measuring cup!

BLACKFIRE Microfiber Cleaner & Restorer is formulated to meet the unique cleaning requirements of microfiber. It releases oily residues and greasy stains better than an ordinary laundry detergent and leaves microfiber feeling like new! Even better, BLACKFIRE Microfiber Cleaner & Restorer protects the special characteristics of microfiber - its tremendous absorbency, luxurious softness, and dust-attracting magnetism. Why wash microfiber with anything else?

Microfiber is unlike any other fabric and it deserves a cleaner unlike any other detergent! BLACKFIRE Microfiber Cleaner & Restorer releases tough stains and residues while restoring the softness and cleaning ability that makes microfiber the best detailing material. Microfiber is engineered from man made fibers to be softer, more durable, and more absorbent than any natural material. BLACKFIRE Microfiber Cleaner & Restorer removes oil, grease, wax and polish residue, protein-based stains like blood and sweat, grass stains, food, and cosmetics while restoring a soft, fluffy feel to the fabric.

BLACKFIRE Microfiber Cleaner & Restorer is HE safe and can be added directly to your load of towels!.

Never use bleach or fabric softeners on microfiber. Bleach can damage fibers over time and it isn't necessary. Fabric softeners eliminate the microfiber's magnetic charge. BLACKFIRE Microfiber Cleaner & Restorer contains only emulsifiers, surfactants, chelating agents and water softeners to break down oily deposits and release them from the fabric. Nothing extra goes into our detergent.

Mild water softeners in BLACKFIRE Microfiber Cleaner & Restorer neutralize hard water in the washing machine to maintain the softness of microfiber. No additional softeners or dryer sheets are needed. Microfiber products will come out of the dryer feeling soft and fluffy. Most importantly, microfiber will retain its cleaning properties wash after wash. In fact, you can use BLACKFIRE Microfiber Cleaner & Restorer to safely clean terry cloth and leather chamois.

 

Directions:

For best results, always wash microfiber separately from other laundry. Do not use fabric softener, bleach, or dryer sheets. Add 2 ounces of BLACKFIRE Microfiber Cleaner & Restorer to washing machine to clean a half load of microfiber. Add 4 ounces to clean a full load. Tumble dry microfiber on low heat or no heat.

128 oz.

Discontinued. "|""|""|""|""|""|""|""|"(:BLACKFIRE-MICROFIBER-CLEANER-5G)"|""||""|""|""|""|""|""||0| blackfire-microfiber-cleaner-5g|BF-800-5G|CUSTOM-ITEM|"BLACKFIRE Microfiber Cleaner & Restorer 5 Gallon"|"https://www.blackfirewax.com/blackfire-microfiber-cleaner-5g.html"|(249.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"New bottle features built-in measuring cup!

BLACKFIRE Microfiber Cleaner & Restorer is formulated to meet the unique cleaning requirements of microfiber. It releases oily residues and greasy stains better than an ordinary laundry detergent and leaves microfiber feeling like new! Even better, BLACKFIRE Microfiber Cleaner & Restorer protects the special characteristics of microfiber  - its tremendous absorbency, luxurious softness, and dust-attracting magnetism. Why wash microfiber with anything else?

Microfiber is unlike any other fabric and it deserves a cleaner unlike any other detergent! BLACKFIRE Microfiber Cleaner & Restorer releases tough stains and residues while restoring the softness and cleaning ability that makes microfiber the best detailing material. Microfiber is engineered from man made fibers to be softer, more durable, and more absorbent than any natural material. BLACKFIRE Microfiber Cleaner & Restorer removes oil, grease, wax and polish residue, protein-based stains like blood and sweat, grass stains, food, and cosmetics while restoring a soft, fluffy feel to the fabric.

BLACKFIRE Microfiber Cleaner & Restorer is HE safe and can be added directly to your load of towels!.

Never use bleach or fabric softeners on microfiber. Bleach can damage fibers over time and it isn't necessary. Fabric softeners eliminate the microfiber's magnetic charge. BLACKFIRE Microfiber Cleaner & Restorer contains only emulsifiers, surfactants, chelating agents and water softeners to break down oily deposits and release them from the fabric. Nothing extra goes into our detergent.

Mild water softeners in BLACKFIRE Microfiber Cleaner & Restorer neutralize hard water in the washing machine to maintain the softness of microfiber. No additional softeners or dryer sheets are needed. Microfiber products will come out of the dryer feeling soft and fluffy. Most importantly, microfiber will retain its cleaning properties wash after wash. In fact, you can use BLACKFIRE Microfiber Cleaner & Restorer to safely clean terry cloth and leather chamois.

 

Directions:

For best results, always wash microfiber separately from other laundry. Do not use fabric softener, bleach, or dryer sheets. Add 2 ounces of BLACKFIRE Microfiber Cleaner & Restorer to washing machine to clean a half load of microfiber. Add 4 ounces to clean a full load. Tumble dry microfiber on low heat or no heat.

5 Gallons (640 oz.)

This product is not available for expedited shipping.

"|"BLACKFIRE Microfiber Cleaner & Restorer 5 Gallon"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-800-duo|BF-800-128-P|CUSTOM-ITEM|"BLACKFIRE Microfiber Cleaner & Restorer Duo Pack"|"https://www.blackfirewax.com/bf-800-duo.html"|(67.98)|(49.99)||""|""|""|""|""|"New bottle features built-in measuring cup!

BLACKFIRE Microfiber Cleaner & Restorer is formulated to meet the unique cleaning requirements of microfiber. It releases oily residues and greasy stains better than an ordinary laundry detergent and leaves microfiber feeling like new! Even better, BLACKFIRE Microfiber Cleaner & Restorer protects the special characteristics of microfiber  - its tremendous absorbency, luxurious softness, and dust-attracting magnetism. Why wash microfiber with anything else?

Microfiber is unlike any other fabric and it deserves a cleaner unlike any other detergent! BLACKFIRE Microfiber Cleaner & Restorer releases tough stains and residues while restoring the softness and cleaning ability that makes microfiber the best detailing material. Microfiber is engineered from man made fibers to be softer, more durable, and more absorbent than any natural material. BLACKFIRE Microfiber Cleaner & Restorer removes oil, grease, wax and polish residue, protein-based stains like blood and sweat, grass stains, food, and cosmetics while restoring a soft, fluffy feel to the fabric.

BLACKFIRE Microfiber Cleaner & Restorer is HE safe and can be added directly to your load of towels!.

Never use bleach or fabric softeners on microfiber. Bleach can damage fibers over time and it isn't necessary. Fabric softeners eliminate the microfiber's magnetic charge. BLACKFIRE Microfiber Cleaner & Restorer contains only emulsifiers, surfactants, chelating agents and water softeners to break down oily deposits and release them from the fabric. Nothing extra goes into our detergent.

Mild water softeners in BLACKFIRE Microfiber Cleaner & Restorer neutralize hard water in the washing machine to maintain the softness of microfiber. No additional softeners or dryer sheets are needed. Microfiber products will come out of the dryer feeling soft and fluffy. Most importantly, microfiber will retain its cleaning properties wash after wash. In fact, you can use BLACKFIRE Microfiber Cleaner & Restorer to safely clean terry cloth and leather chamois.

 

Directions:

For best results, always wash microfiber separately from other laundry. Do not use fabric softener, bleach, or dryer sheets. Add 2 ounces of BLACKFIRE Microfiber Cleaner & Restorer to washing machine to clean a half load of microfiber. Add 4 ounces to clean a full load. Tumble dry microfiber on low heat or no heat.

16 oz.

Discontinued. "|"BLACKFIRE Microfiber Cleaner & Restorer"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-suede-cloths-10pk|BF-SUEDE10|CUSTOM-ITEM|"BLACKFIRE MicroSuede Cloths 10 Pack"|"https://www.blackfirewax.com/blackfire-suede-cloths-10pk.html"|(9.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"BLACKFIRE MicroSuede Cloths, using specially designed flat weave, are the perfect construction for applying ceramic coatings. BLACKFIRE MicroSuede Cloths is no-linting and will not leave debris on surfaces while coating. These ultra-soft towels will not mar the surface, leaving behind only a perfectly applied layer of BLACKFIRE Pro Ceramic Coating."|"BLACKFIRE MicroSuede Cloths 10 Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-midnight-sun-wax|BF-333|CUSTOM-ITEM|"BLACKFIRE Midnight Sun Carnauba Paste Wax"|"http://www.blackfirewax.com/blackfire-midnight-sun-wax.html"|(59.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

Wax your way to a warm, bright glow!

BLACKFIRE Midnight Sun Ivory Carnauba Paste is a hand poured premium carnauba wax that combines a mile deep shimmering gloss with high tech Wet Diamond polymers. It brings out the best in all paint finishes with a combination of super-refined carnauba wax blended with nourishing oils and Wet Diamond polymers. This wax creates incredible depth of shine on all paint colors with a hard, protective barrier to the elements. BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax is perfect on top of BLACKFIRE Paint Sealant or by itself. It glimmers with depth either way!

BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax can be used as a final wax or as a topping over any polymer sealant, including the latest generation of super-slippery sealants. It will not haze, streak or cause patches of uneven gloss. It's also extremely resistant to high humidity. BLACKFIRE makes it simple to get the shine you crave!

Midnight Sun is used on the most prestigious show cars thanks to its complex blend of ivory carnauba wax and Wet Diamond Polymers.

Midnight Sun Ivory Carnauba Paste Wax is a pure wax without any cleaning properties. It is designed to create maximum shine on new, painted metal or painted fiberglass finishes. If your vehicle is two years old or older, we strongly recommend claying the vehicle with BLACKFIRE Poly Clay and Clay Lubricant to remove paint contamination. Then polish with BLACKFIRE Paint Cleaner before applying this Wet-Ice over Fire finish. The wax will bond better and have a clearer, crisper shine.

BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax is more resistant to washings than a typical carnauba wax. One of the drawbacks of any carnauba wax is durability. Our tests in Florida during the summer have demonstrated water beading after 100 days. The polymers used to fortify Midnight Sun are very resistant to high heat and detergent washings but BLACKFIRE’s Ice over Fire shine was designed for a particular "look," not for ultimate durability. To get the best shine AND durability, use Midnight Sun as a topper over BLACKFIRE Wet Diamond All Finish Paint Protection.

Between details, spray and wipe the finish with BLACKFIRE Instant Detailer or BLACKFIRE Carnauba Spray Wax to maintain a high gloss and prolong the protection.

Directions:

Apply BLACKFIRE Midnight Sun Ivory Carnauba Paste  by hand or dual-action polisher using a soft applicator pad. Apply a thin even coat onto a section at a time and  hand buff to a brilliant shine with a microfiber towel. Do not allow Midnight Sun Ivory Carnauba Paste to haze. For best results apply to properly prepared paint or on top of cured BLACKFIRE Paint Sealant.

Includes 1 yellow wax applicator and a microfiber towel (color may vary).

7.4 oz.

From tire-shredding muscle cars to 4-door family haulers, BLACKFIRE car care products are guaranteed to turn heads and create WHIPLASH! Check out the shimmering reflections created by BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax on this 1971 Plymouth 'Cuda

"|""|""|""|""|""|""|""|"(:BLACKFIRE-MIDNIGHT-SUN-WAX-SAMPLE)"|""||""|""|""|""|""|""|4|1| midnight-sun-kit|BF-50201|CUSTOM-ITEM|"BLACKFIRE Midnight Sun Wax Kit"|"http://www.blackfirewax.com/midnight-sun-kit.html"|(192.9)|(149.99)|T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|" Give your vehicle the wet-look shine of Midnight Sun Ivory Carnauba Wax!

BLACKFIRE Midnight Sun Wax creates a rich, reflective shine over the newly cleaned and polished paint. This is an excellent kit for vehicles that are in good shape with few imperfections or that have been recently reconditioned.

BLACKFIRE formulas are the result of over twenty years of research with state-of-the-art polymers from Germany, Sweden and the US. BLACKFIRE waxes and sealants wipe on and buff off easily without streaks or hazy patches and with a shine that can last for six months or more. All BLACKFIRE products are surface-friendly and VOC compliant in all 50 states. These water-based formulas clean, condition, polish and protect without the strong solvents found in most car care products.

Midnight Sun is used on the most prestigious show cars thanks to its complex blend of ivory carnauba wax and Wet Diamond Polymers.

7.4 oz. BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax
BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax brings out the best in all paint finishes with a combination of super-refined carnauba wax blended with nourishing oils and German polymers. This wax creates incredible depth of shine on all paint colors with a hard, protective barrier to the elements. BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax is perfect on top of Blackfire Wet Diamond All Finish Paint Protection or by itself. It glimmers with depth either way!

32 oz. BLACKFIRE Car Wash
BLACKFIRE Car Wash cleans your vehicle and renews the shine with every wash. BLACKFIRE Wet Diamond Polymers replenish and reinforce existing paint protection. Incredible Tuff Suds II technology creates mountains of suds to help float away grime and dirt, without scratching the finish. BLACKFIRE Car Wash helps your vehicle look just waxed after every wash!

32 oz. BLACKFIRE Paint Cleaner
BLACKFIRE Paint Cleaner visually reduces swirl marks while creating a wet-look shine. It removes old waxes and sealants and cleans the paint's surface to prep it for a shiny coat of wax or paint sealant. BLACKFIRE Paint Cleaner is a non-abrasive polish and glaze combination. Used before your LSP (last step product), BLACKFIRE Paint Cleaner improves the gloss and clarity of the finish.

32 oz. BLACKFIRE Instant Detailer
Maintain BLACKFIRE's trademark ""Wet Ice over Fire"" shine for weeks longer with BLACKFIRE Instant Detailer. This shine-boosting detail spray instantly revives a dull finish and reactivates the existing wax. BLACKFIRE Instant Detailer looks best over Midnight Sun Paste Wax but it is compatible with all waxes.

The Supreme Guzzler Waffle Weave By Cobra, 20 x 40 inches
he Supreme Guzzler is 20% thicker than the original towel to give it an even greater capacity for moisture. At approximately 5.5 square feet, this waffle weave towel can dry most small cars without being rung out once! As you may well know, microfiber is made of two synthetic fibers: polyester and polyamide. Polyester accounts for the towel’s durability and polishing properties while polyamide is silky soft. The plush 80/20 weave of the two fibers allow the towel to hold a tremendous amount of water; seven times its own weight!

Super Plush Micro-Chenille Wash Mitt
Our Super Plush Micro-Chenille Wash Mitt has 40% larger microfiber fingers than our standard micro-chenille wash mitts! This wash mitt has all the paint-pampering features of the original mitt plus superior durability and a larger size. The Super Plush Micro-Chenille Wash Mitt lathers your vehicle in suds for a safe, swirl-free wash!

2 Microfiber Towels, 16 x 16 inches (color may vary)
Use these microfiber detailing towels for drying, buffing, or as a finishing wipe down. Microfiber is designed to be light, strong, super-absorbent and quick drying. The fibers are non-abrasive, and are woven so tightly that it’s absolutely lint free and extremely durable. Unbelievably, these ultra-tough fibers are engineered to absorb seven times their weight in moisture.

Polyfoam Wax Applicator
This foam wax applicator is best used to apply wax or a paint sealant quickly and evenly. It is soft and absorbent in order to prevent streaking and smudges. Use it to wipe on a thin coat of Midnight Sun Carnauba Wax.

Cobra Microfiber Applicator
Use the microfiber applicator pad to apply Gloss Enhancing Polish. This soft microfiber fabric is made of a split weave that is more absorbent than any flat weave microfiber. The inner foam pad maximizes absorption so any product you’re applying goes on streak-free.

Each kit contains:
7.4 oz. BLACKFIRE Midnight Sun Wax
32 oz. BLACKFIRE Car Wash
32 oz. BLACKFIRE Paint Cleaner
32 oz. BLACKFIRE Instant Detailer
The Supreme Guzzler Waffle Weave By Cobra, 20 x 40 inches
Super Plush Micro-Chenille Wash Mitt
2 Microfiber towels (color may vary)
Polyfoam applicator
Microfiber wax applicator

Retail value of the kit is $172.90, giving you a savings of $42.91!

From tire-shredding muscle cars to 4-door family haulers, BLACKFIRE car care products are guaranteed to turn heads and create WHIPLASH! Check out the shimmering reflections created by BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax on this 1971 Plymouth 'Cuda

"|""|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| multi-surface-dressing|BF-480|CUSTOM-ITEM|"BLACKFIRE Multi-Surface Dressing Concentrate"|"https://www.blackfirewax.com/multi-surface-dressing.html"|(34.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Choose your level of shine!

BLACKFIRE Multi-Surface Dressing Concentrate will allow you to protect a multitude of different surfaces on your vehicle all with one single product. BLACKFIRE Multi-Surface Dressing Concentrate can be diluted to different ratios to enable you to apply it to any leather, vinyl, rubber, or plastic interior or exterior surface. BLACKFIRE Multi-Surface Dressing Concentrate is uniquely formulated to provide your preferred level of shine simply by changing the dilution ratio, making it a great choice whether you want a muted satin finish or a high shine finish. Regardless of how BLACKFIRE Multi-Surface Dressing Concentrate is diluted, it will always provide an exceptional level of protection to your interior and exterior leather, plastic, rubber, and vinyl!

What’s the number one goal in auto detailing? Creating a perfect shine. Whether that’s from hours of paint correction or multiple layers of your favorite wax, creating a mirror finish is the goal – and that applies to all areas of the vehicle. While your exterior plastic pieces will never really “shine” like freshly waxed paint, you can create a perfectly detailed look, especially when BLACKFIRE Multi-Surface Dressing Concentrate is used!

BLACKFIRE Multi-Surface Dressing Concentrate was designed to be the “people’s dressing”. The versatility of this formula allows you to create the exact finish you want on your treated surfaces – be it that “wet” look on tires, or a more muted, satin finish on your exterior trim. For professional detailers, BLACKFIRE Multi-Surface Dressing Concentrate allows you to stretch one bottle of product further, without compromising a freshly detailed look.

In addition to delivering your desired layer of gloss, BLACKFIRE Multi-Surface Dressing Concentrate provides protection against UV rays, dirt, dust, and more and will make the removal of said contaminants easier. When used on leather surfaces, BLACKFIRE Multi-Surface Dressing isn’t too slick that you or your customers will be sliding around, and neither does it sling when used on tires.

---

---

Thanks to BLACKFIRE Multi-Surface Dressing Concentrate’s versatile formula, you don’t need multiple bottles of dressings for each surface – use BLACKFIRE Multi-Surface Dressing Concentrate on both interior and exterior leather, plastic, rubber, and vinyl!

Keep both your wallet and your car happy with BLACKFIRE Multi-Surface Dressing Concentrate!

Directions:
For a high gloss finish, dilute BLACKFIRE Multi-Surface Dressing Concentrate 1:1.
For a low shine, satin finish, dilute BLACKFIRE Multi-Surface Dressing Concentrate 1:2 or 1:4, depending on your preferences.

1. Spray BLACKFIRE Multi-Surface Dressing Concentrate directly onto the surface to be treated.
2. Allow time to penetrate before buffing excess product away.

Multiple layers can be used for an increased shine.
BLACKFIRE Multi-Surface dressing safe for use around painted areas.

32 oz. "|"BLACKFIRE Multi-Surface Dressing Concentrate"|""|""|""|""|""|""|"(:MULTI-SURFACE-DRESSING-128)"|""||""|""|""|""|""|""||0| multi-surface-dressing-128|BF-480-128|CUSTOM-ITEM|"BLACKFIRE Multi-Surface Dressing Concentrate 128 oz."|"https://www.blackfirewax.com/multi-surface-dressing-128.html"|(119.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Choose your level of shine!

BLACKFIRE Multi-Surface Dressing Concentrate will allow you to protect a multitude of different surfaces on your vehicle all with one single product. BLACKFIRE Multi-Surface Dressing Concentrate can be diluted to different ratios to enable you to apply it to any leather, vinyl, rubber, or plastic interior or exterior surface. BLACKFIRE Multi-Surface Dressing Concentrate is uniquely formulated to provide your preferred level of shine simply by changing the dilution ratio, making it a great choice whether you want a muted satin finish or a high shine finish. Regardless of how BLACKFIRE Multi-Surface Dressing Concentrate is diluted, it will always provide an exceptional level of protection to your interior and exterior leather, plastic, rubber, and vinyl!

What’s the number one goal in auto detailing? Creating a perfect shine. Whether that’s from hours of paint correction or multiple layers of your favorite wax, creating a mirror finish is the goal – and that applies to all areas of the vehicle. While your exterior plastic pieces will never really “shine” like freshly waxed paint, you can create a perfectly detailed look, especially when BLACKFIRE Multi-Surface Dressing Concentrate is used!

BLACKFIRE Multi-Surface Dressing Concentrate was designed to be the “people’s dressing”. The versatility of this formula allows you to create the exact finish you want on your treated surfaces – be it that “wet” look on tires, or a more muted, satin finish on your exterior trim. For professional detailers, BLACKFIRE Multi-Surface Dressing Concentrate allows you to stretch one bottle of product further, without compromising a freshly detailed look.

In addition to delivering your desired layer of gloss, BLACKFIRE Multi-Surface Dressing Concentrate provides protection against UV rays, dirt, dust, and more and will make the removal of said contaminants easier. When used on leather surfaces, BLACKFIRE Multi-Surface Dressing isn’t too slick that you or your customers will be sliding around, and neither does it sling when used on tires.

Thanks to BLACKFIRE Multi-Surface Dressing Concentrate’s versatile formula, you don’t need multiple bottles of dressings for each surface – use BLACKFIRE Multi-Surface Dressing Concentrate on both interior and exterior leather, plastic, rubber, and vinyl!

Keep both your wallet and your car happy with BLACKFIRE Multi-Surface Dressing Concentrate!

Directions:
For a high gloss finish, dilute BLACKFIRE Multi-Surface Dressing Concentrate 1:1.
For a low shine, satin finish, dilute BLACKFIRE Multi-Surface Dressing Concentrate 1:2 or 1:4, depending on your preferences.

1. Spray BLACKFIRE Multi-Surface Dressing Concentrate directly onto the surface to be treated.
2. Allow time to penetrate before buffing excess product away.

Multiple layers can be used for an increased shine.
BLACKFIRE Multi-Surface dressing safe for use around painted areas.

128 oz. "|"BLACKFIRE Multi-Surface Dressing Concentrate 128 oz."|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-480-duo|BF-480-128-P|CUSTOM-ITEM|"BLACKFIRE Multi-Surface Dressing Concentrate Duo Pack"|"https://www.blackfirewax.com/bf-480-duo.html"|(142.99)|(105)||""|""|""|""|""|"Choose your level of shine!

BLACKFIRE Multi-Surface Dressing Concentrate will allow you to protect a multitude of different surfaces on your vehicle all with one single product. BLACKFIRE Multi-Surface Dressing Concentrate can be diluted to different ratios to enable you to apply it to any leather, vinyl, rubber, or plastic interior or exterior surface. BLACKFIRE Multi-Surface Dressing Concentrate is uniquely formulated to provide your preferred level of shine simply by changing the dilution ratio, making it a great choice whether you want a muted satin finish or a high shine finish. Regardless of how BLACKFIRE Multi-Surface Dressing Concentrate is diluted, it will always provide an exceptional level of protection to your interior and exterior leather, plastic, rubber, and vinyl!

What’s the number one goal in auto detailing? Creating a perfect shine. Whether that’s from hours of paint correction or multiple layers of your favorite wax, creating a mirror finish is the goal – and that applies to all areas of the vehicle. While your exterior plastic pieces will never really “shine” like freshly waxed paint, you can create a perfectly detailed look, especially when BLACKFIRE Multi-Surface Dressing Concentrate is used!

BLACKFIRE Multi-Surface Dressing Concentrate was designed to be the “people’s dressing”. The versatility of this formula allows you to create the exact finish you want on your treated surfaces – be it that “wet” look on tires, or a more muted, satin finish on your exterior trim. For professional detailers, BLACKFIRE Multi-Surface Dressing Concentrate allows you to stretch one bottle of product further, without compromising a freshly detailed look.

In addition to delivering your desired layer of gloss, BLACKFIRE Multi-Surface Dressing Concentrate provides protection against UV rays, dirt, dust, and more and will make the removal of said contaminants easier. When used on leather surfaces, BLACKFIRE Multi-Surface Dressing isn’t too slick that you or your customers will be sliding around, and neither does it sling when used on tires.

---

---

Thanks to BLACKFIRE Multi-Surface Dressing Concentrate’s versatile formula, you don’t need multiple bottles of dressings for each surface – use BLACKFIRE Multi-Surface Dressing Concentrate on both interior and exterior leather, plastic, rubber, and vinyl!

Keep both your wallet and your car happy with BLACKFIRE Multi-Surface Dressing Concentrate!

Directions:
For a high gloss finish, dilute BLACKFIRE Multi-Surface Dressing Concentrate 1:1.
For a low shine, satin finish, dilute BLACKFIRE Multi-Surface Dressing Concentrate 1:2 or 1:4, depending on your preferences.

1. Spray BLACKFIRE Multi-Surface Dressing Concentrate directly onto the surface to be treated.
2. Allow time to penetrate before buffing excess product away.

Multiple layers can be used for an increased shine.
BLACKFIRE Multi-Surface dressing safe for use around painted areas.

32 oz. "|"BLACKFIRE Multi-Surface Dressing Concentrate Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| multi-surface-dressing-kit|BF-480-KIT|CUSTOM-ITEM|"BLACKFIRE Multi-Surface Dressing Kit"|"https://www.blackfirewax.com/multi-surface-dressing-kit.html"|(63.93)|(44.99)|T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Keep your vehicle’s surfaces looking pristine!

BLACKFIRE Multi-Surface Dressing Kit will give you everything you need to apply the extremely versatile BLACKFIRE Multi-Surface Dressing Concentrate to any interior or exterior vinyl, leather, rubber, and plastic surface on your vehicle. This kit comes with 3 microfiber applicators and 3 microfiber towels. The applicators are the perfect tool for applying BLACKFIRE Multi-Surface Dressing to your vehicle's surfaces, while the towels are the ideal choice for buffing off any excess residue. BLACKFIRE Multi-Surface Dressing Concentrate can be diluted at different ratios to adjust the level of shine it provides; the more product in the dilution, the higher the shine. The 36-oz. spray bottle comes with easy to use dilution ratio measurements on the side to allow you to achieve the optimal dilution of BLACKFIRE Multi-Surface Dressing Concentrate to fit the job you’re doing.

BLACKFIRE Multi-Surface Dressing Kit includes:

BLACKFIRE Multi-Surface Dressing Concentrate
BLACKFIRE Multi-Surface Dressing Concentrate is a versatile, ultra-concentrated formula designed to enhance and protect all of your leather, vinyl, rubber, and plastic interior and exterior surfaces. BLACKFIRE Multi-Surface Dressing Concentrate allows you to customize the level of shine you want with its multiple dilution ratios, without compromising the effectiveness of the formula. Keep your interior and exterior leather, plastic, vinyl, and rubber surfaces looking new and fresh, as well as protected, with BLACKFIRE Multi-Surface Dressing Concentrate!

36 Ounce Detail Bottle
For the serious detailer, we now have a heavy-duty spray trigger bottle. You can use it to spray both interior and exterior detail chemicals when cleaning your car. This bottle is also useful around the house and yard. The 36 ounce bottle is constructed of PVC for extra durability. The bottle is labeled in ounces and milliliters so you can measure your liquids accurately. If you need to dilute concentrated liquids, the bottle also has a handy chart to follow on it's side with dilution ratios of 1-1 to 1-10.

3 qty. Microfiber Applicator Pads
With over 200,000 strands of advanced microfibers per square inch, nothing matches its ability to remove dirt, residues, and surface oxidation. An 80/20 polyester/polyamide blend of “split” weave fibers, 100 times finer than a human hair, ensure smooth and even wax distribution. This advanced microfiber fabric is a lint free material. Microfiber Applicator Pads are angel hair soft, and completely non-abrasive, so they are safe to use on even the most delicate surfaces.

3 qty. Storm Gray Edgeless Microfiber Polishing Cloth, 16 x 16 inches
The Storm Gray Edgeless Microfiber Polishing Cloth is woven specifically for wax and polish removal. It has a soft touch that is extra gentle on sensitive clear coat finishes. Plus, the cloth has no edges, making accidental scratches virtually impossible. Use this cloth the next time you wax your vehicle and I promise you’ll never use anything else!

Kit includes:

32 oz. BLACKFIRE Multi-Surface Dressing Concentrate
36 Ounce Detail Bottle
3 qty. Microfiber Applicator Pads
3 qty. Storm Gray Edgeless Microfiber Polishing Cloth, 16 x 16 inches

A total retail value of $63.93. You save $18.93! "|"BLACKFIRE Multi-Surface Dressing Kit "|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-new-car-kit|BF-NEWCAR|CUSTOM-ITEM|"BLACKFIRE New Car Kit"|"https://www.blackfirewax.com/blackfire-new-car-kit.html"|(166.89)|(124.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"The perfect introduction to BLACKFIRE!

The BLACKFIRE New Car Kit is the perfect way to pamper your vehicle while learning more about the BLACKFIRE car care line. This well-rounded kit contains everything you need to wash your vehicle, protect the paint, and create whiplash! With the BLACKFIRE New Car Kit, you’ll be able to properly wash your new car using BLACKFIRE Car Wash along with the included Micro-Chenille Wash Mitt and Professional 5-Gallon Wash Bucket. Once the vehicle is clean, add a coat of BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax for protection and shine. Dress the tires with BLACKFIRE Tire Gel to complete the look, then cleanup the interior with BLACKFIRE Interior Detailer. You’ll get a taste of the entire BLAKFIRE line, while your car—new or old—gets the attention it deserves!

The BLACKFIRE New Car Kit Includes:

BLACKFIRE 5 Gallon Professional Wash Bucket with Grit Guard
The BLACKFIRE 5 Gallon Professional Wash Bucket with Grit Guard® minimizes the risk of paint swirls when you wash your vehicle. The 5 gallon bucket includes a Grit Guard® Insert, which is proven to reduce the amount of grit that is transferred back to your vehicle from the wash water. The BLACKFIRE 5 Gallon Grit Guard Wash Bucket helps you wash your vehicle safely every time.

32 oz. BLACKFIRE Car Wash
BLACKFIRE Car Wash cleans your vehicle and renews the shine every time you wash your car. BLACKFIRE's tri-polymers replenish and reinforce existing paint protection. Incredible Tuff Suds II technology creates mountains of suds to help float away grime and dirt, without scratching the finish. Drying agents help reduce water spotting and make drying easier. BLACKFIRE Car Wash helps your vehicle look just waxed after every wash!

32 oz. BLACKFIRE Tire Gel
BLACKFIRE Tire Gel darkens and conditions rubber to restore the look of new tires. This thick, water-based tire dressing provides a natural, matte look with one coat or a high gloss finish with two coats. UV inhibitors and polymers protect tires to maintain their color and flexibility. BLACKFIRE Tire Gel provides the concours look that complements any vehicle.

32 oz. BLACKFIRE Interior Detailer
BLACKFIRE Interior Detailer is a quick cleaning and quick protecting interior product designed to save you both time and money. BLACKFIRE Interior Detailer is not meant to replace your standard two-step cleaning and protecting routine, it’s simply used when your interior needs a little sprucing up! BLACKFIRE Interior Detailer will remove dust, fingerprints, and smudges from interior surfaces and leaves behind a low sheen, clean finish that will protect against UV rays – after just one use!

3 oz. BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax
BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax brings out the best in all paint finishes with a combination of super-refined carnauba wax blended with nourishing oils and German polymers. This wax creates incredible depth of shine on all paint colors with a hard, protective barrier to the elements. BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax is perfect on top of BLACKFIRE Wet Diamond All Finish Paint Protection or by itself. It glimmers with depth either way!

3 Supreme 530 Microfiber Towels, 16 x 16 inches
No job is too big for the Supreme 530 Microfiber Towel! This ultra-plush, ultra-thick towel has a soft touch to pamper your vehicle as it buffs away waxes, polishes, and quick detailers or dries your vehicle to a spot-free shine. The unique blend of 75% polyester and 25% polyamide gives the towel a balance of softness and toughness to perform any detailing task. The Supreme 530 Microfiber Towel is made of heavy 530g/m² microfiber.

Supreme Micro-Chenille Wash Mitt
Our Supreme Micro-Chenille Wash Mitt has 40% larger microfiber fingers than our standard micro-chenille wash mitts! This wash mitt has all the paint-pampering features of the original mitt plus superior durability and a larger size. The Supreme Micro-Chenille Wash Mitt lathers your vehicle in suds for a safe, swirl-free wash!

Kit Includes:
BLACKFIRE 5 Gallon Professional Wash Bucket with Grit Guard
32 oz. BLACKFIRE Car Wash
32 oz. BLACKFIRE Tire Gel
32 oz. BLACKFIRE Interior Detailer
3 oz. BLACKFIRE Midnight Sun Ivory Carnauba Paste Wax
3 Supreme 530 Microfiber Towels, 16 x 16 inches
Supreme Micro-Chenille Wash Mitt

A total retail value of $153.91. Save $33.92! "|"BLACKFIRE New Car Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-new-vehicle-kit|BF-NEWCERK|CUSTOM-ITEM|"BLACKFIRE New Vehicle Pro Ceramic Kit"|"https://www.blackfirewax.com/blackfire-new-vehicle-kit.html"|(239.89)|(164.99)|T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Preserve that new car look!

The BLACKFIRE New Vehicle Pro Ceramic Kit is exactly what you need if you just got a new car! This all-encompassing kit will provide you with every product and tool you will need to prep, apply, and maintain your car and the ceramic coating you apply! Don’t give that new car the chance to degrade, get the BLACKFIRE New Vehicle Pro Ceramic Kit and keep it looking great for years!

Items in this kit:

BLACKFIRE Pro Ceramic Coating Wash
BLACKFIRE Pro Ceramic Coating Wash is the perfect complementary product for BLACKFIRE Pro Ceramic Coating, as well as any other ceramic paint coating. The thick, sudsy, pH-neutral formula of BLACKFIRE Pro Ceramic Coating Wash will remove surface contamination like dirt, dust, mud, road grime, and more without affecting your coating’s hydrophobicity, protection, or shine. Highly concentrated and featuring the ability to easily be used in Foam Guns or Cannons, BLACKFIRE Pro Ceramic Coating Wash can be used by both professional detailers and enthusiasts alike to keep your BLACKFIRE Pro Ceramic Coated vehicle clean and shining!

BLACKFIRE Pro Primer Polish
BLACKFIRE Pro Primer Polish is the perfect product to use prior to your favorite ceramic coating to ensure that the light swirls and scratches are filled in and the surface is properly prepped. BLACKFIRE Pro Primer Polish contains Silica technology that will create a stronger bond with any ceramic coating applied to your paint surface, greatly increasing the strength and duration of your coating. By combining the two most time-consuming steps of applying a paint coating, BLACKFIRE Pro Primer Polish allows you to cut your detailing time in half. BLACKFIRE Pro Primer Polish can even be used as a stand-alone product to correct minor imperfections and leave a protective barrier behind.

BLACKFIRE SiO2 Spray Sealant
The quality of protection you receive when using BLACKFIRE SiO2 Spray Sealant is comparable to other sealants that take 4 TIMES longer to apply to your paint. Not only will BLACKFIRE SiO2 Spray Sealant protect your paint from road film, dirt, and other common contaminants, but it will also provide impeccable long-lasting hydrophobicity that will make sure water continues to sheet and bead on your paint for months. You can use BLACKFIRE SiO2 Spray Sealant either as a stand-alone paint protection product, or it can be used to maintain your current standing protective sealant or coating.

BLACKFIRE Paint Prep
BLACKFIRE Paint Prep is a pre-coating prep spray designed to remove all polishing oils, synthetic fillers, light dust, and fingerprints from a surface before the application of a paint coating or last step product. BLACKFIRE Paint Prep is a simple spray and wipe, advanced formula that will not mar or scratch the surface during use. The key to a perfect paint coating application is the prep – and BLACKFIRE Paint Prep is just what you need!

BLACKFIRE PRO Ceramic Coating
BLACKFIRE Pro Ceramic Coating bridges the gap between entry level commercial ceramic coatings and professional-only industrial ceramic coatings, allowing everyone to achieve an extraordinary mirror-like shine! BLACKFIRE Pro Ceramic Coating was designed using a solvent and fluorine free formula to maximize its user-safety and ensure that it can be applied anywhere. The thermoplastic component contained in the formula for BLACKFIRE Pro Ceramic Coating creates a flexible, cross-linked matrix that provides 9H+ hardness that is graded to last up to 2 years when properly maintained. The incredible structural integrity of this matrix makes BLACKFIRE Pro Ceramic Coating one of the most abrasion and corrosion resistant ceramic coatings on the market today!

BLACKFIRE Coating Applicator
BLACKFIRE Coating Applicator was optimally designed for the perfection application of BLACKFIRE Pro Ceramic Coating. Constructed using a thick polyurethane handle for enhanced grip on top, and a soft, open cell foam on the bottom, the BLACKFIRE Coating Applicator promotes an even application of product and provides a strong base when wrapped in a BLACKFIRE MicroSuede Cloth. The application of paint coatings can be tricky enough sometimes, don’t hamper your results with sub-par tools – pick up the BLACKFIRE Coating Applicator today and achieve the best coating results you can!

BLACKFIRE Microsuede Cloths
BLACKFIRE MicroSuede Cloths, using specially designed flat weave, are the perfect construction for applying ceramic coatings. BLACKFIRE MicroSuede Cloths is no-linting and will not leave debris on surfaces while coating. These ultra-soft towels will not mar the surface, leaving behind only a perfectly applied layer of BLACKFIRE Pro Ceramic Coating.

Storm Gray Edgeless Microfiber Towels
The Storm Gray Edgeless Microfiber Polishing Cloth is woven specifically for wax and polish removal. It has a soft touch that is extra gentle on sensitive clear coat finishes. Plus, the cloth has no edges, making accidental scratches virtually impossible. Use this cloth the next time you wax your vehicle and I promise you’ll never use anything else!

Lake Country Wash Wedge
The Lake Country Wash Wedge is an ingeniously designed gold foam wash sponge that features cross-cut and slotted grooves for safe, effective dirt removal. Constructed entirely out of premium gold foam, Lake Country’s softest foam, the Wash Wedge pampers your vehicle’s delicate finish to ensure the paint remains swirl and scratch free after every wash. Comfort-grip neoprene foam handle makes the Wash Wedge easy to hold on to, even with soapy hands.

Kit includes
BLACKFIRE Pro Ceramic Coating Wash 32oz.
BLACKFIRE Pro Primer Polish 8oz.
BLACKFIRE SiO2 Spray Sealant 32oz.
BLACKFIRE Paint Prep 32oz.
BLACKFIRE PRO Ceramic Coating 50ml
BLACKFIRE Coating Applicator
10 x BLACKFIRE Microsuede Cloths
3 x Storm Gray Edgeless Microfiber Towels
Lake Country Wash Wedge

A total retail value of $221.91. Save $71.92!

Federal regulations prohibit the shipment of aerosol or ORMD products by air. This item is shipped by UPS Ground only.

"|"BLACKFIRE New Vehicle Pro Ceramic Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-total-polish-seal|BF-900|CUSTOM-ITEM|"BLACKFIRE One Step"|"http://www.blackfirewax.com/blackfire-total-polish-seal.html"|(39.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

BLACKFIRE One Step is an all-in-one polish and paint sealant that delivers a smooth shine in one quick step. This is a timesaver that will save your paint finish. A combination of cleaners, polishing agents, and Wet Diamond polymers gives any paint finish instant shine and lasting protection. See what you can accomplish in just one step with BLACKFIRE One Step!

This is the perfect product for daily drivers. BLACKFIRE One Step delivers an attractive gloss and the appearance of smooth, clean paint in far less time than a complete three-step detailing process. One Step is designed to provide the shine you want and protection your vehicle needs in a practical, easy-to-use product.

In this 50/50 shot, you can see the bad shape this paint job was in before BLACKFIRE One Step, as well as after treatment! BLACKFIRE One Step removed the swirls and and created a deep gloss finish!

BLACKFIRE One Step is a light swirl remover, pre-wax cleanser and paint sealant all in one!  A lot of one-step cleaner waxes clean the paint, but few have the ability to remove mild swirls. BLACKFIRE One Step can! Mild polishing agents remove fine swirls and minimize the appearance of imperfections. Cleaners remove wax buildup and surface contamination. At the same time, the unique Wet Diamond tri-polymer system cross-links across the paint to form a barrier against UV rays, moisture, and dirt. All you have to do is apply BLACKFIRE One Step and buff it off! Wet Diamond shine in one step!

BLACKFIRE One Step is designed for easy application by hand or polisher. This unique formula can be buffed until it disappears. There is little or no dust and clean-up is easy. These are just more ways BLACKFIRE One Step saves you time.

Saving time is important but real performance is essential. BLACKFIRE One Step passes the test with a smooth shine and excellent paint protection in one simple step.

 

BLACKFIRE One Step was the only product used to perfect, polish, and protect this car - results ARE typical!

Directions:

Work out of direct sunlight. Apply a circle of One Step onto a foam polishing/finishing pad. With the polisher turned off, spread the product over a 2 sq. ft. area of paint. Set the speed to 5 and work the product over the area. Continue to polish until product disappears. It does not require buffing. To apply by hand, use a clean foam applicator to work One Step into the paint until it disappears.

32 oz.

"|""|""|""|""|""|""|""|"(:TOTAL-POLISH-SEAL-128 :BLACKFIRE-TOTAL-POLISH-SEAL-5G)"|""||""|""|""|""|""|""||0| total-polish-seal-128|BF-900-128|CUSTOM-ITEM|"BLACKFIRE One Step 128 oz."|"http://www.blackfirewax.com/total-polish-seal-128.html"|(139.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

BLACKFIRE One Step is an all-in-one polish and paint sealant that delivers a smooth shine in one quick step. This is a timesaver that will save your paint finish. A combination of cleaners, polishing agents, and Wet Diamond polymers gives any paint finish instant shine and lasting protection. See what you can accomplish in just one step with BLACKFIRE One Step!

This is the perfect product for daily drivers. BLACKFIRE One Step delivers an attractive gloss and the appearance of smooth, clean paint in far less time than a complete three-step detailing process. One Step is designed to provide the shine you want and protection your vehicle needs in a practical, easy-to-use product.

In this 50/50 shot, you can see the bad shape this paint job was in before BLACKFIRE One Step, as well as after treatment! BLACKFIRE One Step removed the swirls and and created a deep gloss finish!

BLACKFIRE One Step is a light swirl remover, pre-wax cleanser and paint sealant all in one! A lot of one-step cleaner waxes clean the paint, but few have the ability to remove mild swirls. BLACKFIRE One Step can! Mild polishing agents remove fine swirls and minimize the appearance of imperfections. Cleaners remove wax buildup and surface contamination. At the same time, the unique Wet Diamond tri-polymer system cross-links across the paint to form a barrier against UV rays, moisture, and dirt. All you have to do is apply BLACKFIRE One Step and buff it off! Wet Diamond shine in one step!

BLACKFIRE One Step is designed for easy application by hand or polisher. This unique formula can be buffed until it disappears. There is little or no dust and clean-up is easy. These are just more ways BLACKFIRE One Step saves you time.

Saving time is important but real performance is essential. BLACKFIRE One Step passes the test with a smooth shine and excellent paint protection in one simple step.

 

BLACKFIRE One Step was the only product used to perfect, polish, and protect this car - results ARE typical!

Directions:

Work out of direct sunlight. Apply a circle of One Step onto a foam polishing/finishing pad. With the polisher turned off, spread the product over a 2 sq. ft. area of paint. Set the speed to 5 and work the product over the area. Continue to polish until product disappears. It does not require buffing. To apply by hand, use a clean foam applicator to work One Step into the paint until it disappears.

128 oz.

"|""|""|""|""|""|""|""|"(:BLACKFIRE-TOTAL-POLISH-SEAL-5G)"|""||""|""|""|""|""|""|5|1| blackfire-one-step-16|BF-900-16|CUSTOM-ITEM|"BLACKFIRE One Step 16 oz."|"https://www.blackfirewax.com/blackfire-one-step-16.html"|(27.99)||T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"

Polish, perfect, and protect – in one step!

BLACKFIRE One Step is an all-in-one product that will remove light swirls and paint dullness from your paint while also laying down an intense, high-grade paint sealant onto the surface. A genuine one step product, BLACKFIRE One Step is perfect for professional detailers looking to enhance their service selection, as well as the DIY enthusiast that wants high-performing product that isn’t complicated. BLACKFIRE One Step is here to change the paint perfecting game – and it’s already performing!

Correcting your paint and making it perfect can be a long and daunting task. Everywhere you look you see a 3-step system with multiple pads, different products, recommended temperatures for use, and so on and so forth. BLACKFIRE One Step is looking to simplify the paint correct process for you. Engineered to be a swirl remover, finishing polish, and long-lasting paint sealant in application, BLACKFIRE One Step provides the look you want without the hassle.

In this 50/50 shot, you can see the bad shape this paint job was in before BLACKFIRE One Step, as well as after treatment! BLACKFIRE One Step removed the swirls and and created a deep gloss finish!

BLACKFIRE One Step features advanced micro-abrasive particles that easily remove light swirls, paint dullness, contamination, and mild oxidation for a crystal-clear finish. The high-grade paint sealant provides long-lasting protection against UV rays, road grime, outside contamination while also giving an unparalleled level of gloss and clarity.

BLACKFIRE One Step is low-dusting, easy to remove and can be applied by machine or by hand. Having perfect paint doesn’t have to be difficult to achieve; use BLACKFIRE One Step to remove swirls and imperfections, polishing to a high shine and protect against the elements – all in just one step!

Use your favorite wax, like the BLACKFIRE BlackICE Hybrid Liquid Wax after BLACKFIRE One Step for an added layer of protection and shine!

Features:

• Removes light swirls, dullness, and mild oxidation from paint.
• Removes paint contamination.
• High grade paint sealant and polish in one.
• Dust-free and easy to remove.
• Can be applied by hand or machine.
• Clear coat safe.

BLACKFIRE One Step was the only product used to perfect, polish, and protect this car - results ARE typical!

Directions for use:

Shake well before use and work out of direct sunlight.

Machine Application: Apply a circle of One Step onto a foam polishing/finishing pad. With the polisher turned off, spread the product over a 2 x 2 area of paint. Set the speed to 5 and work the product over the area using moderate pressure and overlapping passes. Using a slower motion will remove paint imperfections. Repeat as necessary. Use a clean, soft microfiber towel to buff off excess product and to produce a high shine. Hand Application: Use a clean foam polishing/finishing applicator pad to work One Step into the paint in overlapping motion. Use a clean, soft microfiber towel to buff off excess product and to produce a high shine.

16 oz.

"|"BLACKFIRE One Step 16 oz. "|""|""|""|""|""|""|"(:BLACKFIRE-TOTAL-POLISH-SEAL :TOTAL-POLISH-SEAL-128 :BLACKFIRE-TOTAL-POLISH-SEAL-5G)"|""||""|""|""|""|""|""||0| blackfire-total-polish-seal-5g|BF-900-5G|CUSTOM-ITEM|"BLACKFIRE One Step 5 Gallon"|"https://www.blackfirewax.com/blackfire-total-polish-seal-5g.html"|(524.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"

BLACKFIRE One Step is an all-in-one polish and paint sealant that delivers a smooth shine in one quick step. This is a timesaver that will save your paint finish. A combination of cleaners, polishing agents, and Wet Diamond polymers gives any paint finish instant shine and lasting protection. See what you can accomplish in just one step with BLACKFIRE One Step!

This is the perfect product for daily drivers. BLACKFIRE One Step delivers an attractive gloss and the appearance of smooth, clean paint in far less time than a complete three-step detailing process. One Step is designed to provide the shine you want and protection your vehicle needs in a practical, easy-to-use product.

In this 50/50 shot, you can see the bad shape this paint job was in before BLACKFIRE One Step, as well as after treatment! BLACKFIRE One Step removed the swirls and and created a deep gloss finish!

BLACKFIRE One Step is a light swirl remover, pre-wax cleanser and paint sealant all in one!  A lot of one-step cleaner waxes clean the paint, but few have the ability to remove mild swirls. BLACKFIRE One Step can! Mild polishing agents remove fine swirls and minimize the appearance of imperfections. Cleaners remove wax buildup and surface contamination. At the same time, the unique Wet Diamond tri-polymer system cross-links across the paint to form a barrier against UV rays, moisture, and dirt. All you have to do is apply BLACKFIRE One Step and buff it off! Wet Diamond shine in one step!

BLACKFIRE One Step is designed for easy application by hand or polisher. This unique formula can be buffed until it disappears. There is little or no dust and clean-up is easy. These are just more ways BLACKFIRE One Step saves you time.

Saving time is important but real performance is essential. BLACKFIRE One Step passes the test with a smooth shine and excellent paint protection in one simple step.

 

BLACKFIRE One Step was the only product used to perfect, polish, and protect this car - results ARE typical!

Directions:

Work out of direct sunlight. Apply a circle of One Step onto a foam polishing/finishing pad. With the polisher turned off, spread the product over a 2 sq. ft. area of paint. Set the speed to 5 and work the product over the area. Continue to polish until product disappears. It does not require buffing. To apply by hand, use a clean foam applicator to work One Step into the paint until it disappears.

5 Gallons (640 oz.)

This product is not available for expedited shipping.

"|"BLACKFIRE One Step 5 Gallon"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-900-duo|BF-900-128-P|CUSTOM-ITEM|"BLACKFIRE One Step Duo Pack"|"https://www.blackfirewax.com/bf-900-duo.html"|(169.98)|(129.99)|T|""|""|""|""|""|"

BLACKFIRE One Step is an all-in-one polish and paint sealant that delivers a smooth shine in one quick step. This is a timesaver that will save your paint finish. A combination of cleaners, polishing agents, and Wet Diamond polymers gives any paint finish instant shine and lasting protection. See what you can accomplish in just one step with BLACKFIRE One Step!

This is the perfect product for daily drivers. BLACKFIRE One Step delivers an attractive gloss and the appearance of smooth, clean paint in far less time than a complete three-step detailing process. One Step is designed to provide the shine you want and protection your vehicle needs in a practical, easy-to-use product.

In this 50/50 shot, you can see the bad shape this paint job was in before BLACKFIRE One Step, as well as after treatment! BLACKFIRE One Step removed the swirls and and created a deep gloss finish!

BLACKFIRE One Step is a light swirl remover, pre-wax cleanser and paint sealant all in one!  A lot of one-step cleaner waxes clean the paint, but few have the ability to remove mild swirls. BLACKFIRE One Step can! Mild polishing agents remove fine swirls and minimize the appearance of imperfections. Cleaners remove wax buildup and surface contamination. At the same time, the unique Wet Diamond tri-polymer system cross-links across the paint to form a barrier against UV rays, moisture, and dirt. All you have to do is apply BLACKFIRE One Step and buff it off! Wet Diamond shine in one step!

BLACKFIRE One Step is designed for easy application by hand or polisher. This unique formula can be buffed until it disappears. There is little or no dust and clean-up is easy. These are just more ways BLACKFIRE One Step saves you time.

Saving time is important but real performance is essential. BLACKFIRE One Step passes the test with a smooth shine and excellent paint protection in one simple step.

 

BLACKFIRE One Step was the only product used to perfect, polish, and protect this car - results ARE typical!

Directions:

Work out of direct sunlight. Apply a circle of One Step onto a foam polishing/finishing pad. With the polisher turned off, spread the product over a 2 sq. ft. area of paint. Set the speed to 5 and work the product over the area. Continue to polish until product disappears. It does not require buffing. To apply by hand, use a clean foam applicator to work One Step into the paint until it disappears.

32 oz.

"|"BLACKFIRE One Step"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-one-step-pp-kit|BF-PP-KIT|CUSTOM-ITEM|"BLACKFIRE One-Step Perfect Paint Kit"|"https://www.blackfirewax.com/blackfire-one-step-pp-kit.html"|(95.93)|(69.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"BLACKFIRE One Step is an all-in-one product that will remove light swirls and paint dullness from your vehicle's paint while also laying down an intense, high-grade paint sealant onto the surface. A genuine one step product, BLACKFIRE One Step is perfect for first-time detailers that want an easy-to-use solution to dull and listless paint. Combined with the tools you need and the BLACKFIRE Instant Detailer for quick shine-inducing wipe downs, the BLACKFIRE One-Step Perfect Paint Kit provides a deep shine on your car, truck, or SUV quickly!

BLACKFIRE One-Step Perfect Paint Kit includes:

BLACKFIRE One Step
BLACKFIRE One Step is an all-in-one product that will remove light swirls and paint dullness from your paint while also laying down an intense, high-grade paint sealant onto the surface. A genuine one step product, BLACKFIRE One Step is perfect for professional detailers looking to enhance their service selection, as well as the DIY enthusiast that wants high-performing product that isn’t complicated. BLACKFIRE One Step is here to change the paint perfecting game – and it’s already performing!

BLACKFIRE Instant Detailer
BLACKFIRE Instant Detail is a supercharged blend of Ivory Carnuaba Wax, Wet Diamond polymers, and high lubricity cleaners. This shine-boosting detail spray instantly revives a dull finish and reactivates existing wax. BLACKFIRE Instant Detailer looks best over Midnight Sun Paste Wax but it is compatible with all waxes. Use this incredible spray to maintain BLACKFIRE's trademark “Wet Ice Over Fire” shine or over your favorite wax or sealant.

3 qty. Supreme 530 Microfiber Towel, 16 x 16 inches
The Supreme 530 Microfiber Towel weighs in at a formidable 530 g/m2, which tips the scale as one of our thickest, most densely woven microfiber towels. Made of plush ultra microfiber, the Supreme 530 Microfiber Towel boasts a luxurious 75/25 blend of polyester and polyamide. Buff away waxes, wipe away glass cleaners, safely apply quick detailers- the Supreme 530 Microfiber Towel does it all!

2 qty. White Polishing Applicator
For general polishing and pre-wax cleaning, we recommend the white polishing foam. This is one of the most versatile foam compositions. Use it to apply finishing polishes, pre-wax cleaners, and all in one products, for example Pinnacle Paintwork Cleansing Lotion or Klasse All In One. The foam is less dense than the orange pad. It has just enough density to help clean and polish the paint, but it will not produce haze.

Kit includes:
BLACKFIRE One Step
BLACKFIRE Instant Detailer
3 qty. Supreme 530 Microfiber Towel, 16 x 16 inches
2 qty. White Polishing Applicator

A total retail value of $95.93. You save $25.94!"|"BLACKFIRE One-Step Perfect Paint Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-pad-care-kit|BF-PCK|CUSTOM-ITEM|"BLACKFIRE Pad Care Kit"|"http://www.blackfirewax.com/blackfire-pad-care-kit.html"|(58.97)|(44.99)|T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"Get the most out of your foam, wool and microfiber buffing pads!

The days of cleaning your buffing and polishing pads with a screw driver are over! You don’t neglect the paint you spent countless hours polishing, so why neglect the buffing and polishing pads you used to achieve that flawless finish? Proper car care starts with the right tools and the right chemicals. With the Blackfire Pad Care Kit, you have just that! Give your buffing and polishing pads the same attention you give your vehicle’s delicate finish with the Blackfire Pad Care Kit.

Buffing and polishing pads are an investment and when taken care of properly, you can get two to three times the life expectancy from them. The Blackfire Pad Care Kit includes the necessary cleaner, conditioner and pad cleaning brush to achieve the maximum operating life of all your foam, wool and microfiber buffing pads.

The Blackfire Pad Care Kit includes:

BLACKFIRE Advanced Pad Cleaner and the Foam Pad Conditioning Brush release caked on polish and wax residue from all types of buffing and polishing pads.

BLACKFIRE Advanced Pad Cleaner
BLACKFIRE Advanced Pad Cleaner prolongs the usefulness of your buffing pads by removing product residues. When pads are cleaned thoroughly after every use, they maintain their texture and performance far longer. You'll save money and you'll get better results with your existing pads. Use Blackfire Advanced Pad Cleaner and the Foam Pad Conditioning Brush to clean foam and wool pads after every detail.

Blackfire Advanced Pad Cleaner is formulated specifically for the cleaning requirements of buffing pads. Polishes, waxes, and sealants can leave greasy residues inside the pores of foam pads and in the fibers of wool pads. If these residues are not removed, they can affect the performance of the next product applied with the same pad. For example, a pad with old polish residue in it can make the wax applied with the same pad look cloudy. It's not the wax's fault - the pad wasn't clean!

To prevent dry buffing, spray each fresh buffing pad with BLACKFIRE Advanced Pad Conditioner before using it.

BLACKFIRE Advanced Pad Conditioner
BLACKFIRE Advanced Pad Conditioner makes machine detailing easier by reducing friction between the pad and the paint. Products glide on more smoothly and the paint is protected from dry buffing. BLACKFIRE Advanced Pad Conditioner reduces skipping or sticking of the pad. Use it every time to prime your pads for perfection.

Dry buffing is what happens when a pad hasn't been primed. There is no lubrication between the pad and the paint to reduce friction. Even though there is polish on the pad, it takes several passes for the polish to completely cover the pad. In the meantime, you're dry buffing the paint! The result is fine scratches. BLACKFIRE Advanced Pad Conditioner prevents dry buffing by moistening the pad face, what we call ""priming the pad."" It acts as a lubricant to eliminate the friction between the pad and the paint. In addition, BLACKFIRE Advanced Pad Conditioner opens up the foam's pores to accept the polish so it disperses evenly over the pad face. As soon as the pad touches the paint, it is already primed and ready to go!

Foam Pad Conditioning Brush
Foam buffing pads become stiff and caked with wax and polish after just one use. If you look closely at the texture of a new foam pad, you’ll see that it is composed of thousands of tiny hollow cells. This varied texture provides polishing action as the pad spins. Wax and polish get caked in these compartments, making the texture of the pad smooth and therefore ineffective. This ergonomically designed Foam Pad Conditioning Brush scrubs wax and polishes out of the foam and restores its original texture.

This handy orange brush is made with a set of stiff bristles that easily pull caked and dried products out of the foam pad. And the specially shaped handle makes it comfortable to grip and keeps your hand away from the spinning buffer. When you’re finished with your buffing pads for the day, saturate them with BLACKFIRE Advanced Pad Cleaner and use the Foam Pad Conditioning Brush to break up and release caked on polish and wax residue.

With the Blackfire Pad Care Kit you can clean and condition your pads the right way so that you get the most out of your investment.

Combo includes:
32 oz. BLACKFIRE Advanced Pad Cleaner
32 oz. BLACKFIRE Advanced Pad Conditioner
Foam Pad Conditioning Brush

A total retail value of $58.97. You save $13.97!"|"BLACKFIRE Pad Care Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-glass-paint-wsr-combo|BF-370-WSRCMB|CUSTOM-ITEM|"BLACKFIRE Paint and Glass Water Spot Remover Combo"|"https://www.blackfirewax.com/blackfire-glass-paint-wsr-combo.html"|(79.92)|(59.99)|T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Blast those water spots from every inch of your vehicle’s surface!

BLACKFIRE Paint and Glass Water Spot Remover Combo in an all-inclusive kit that allows you to remove water spots from all painted and glass surfaces on your vehicle. Perfect for both the average detailer that needs a quick water spot removal because their carport always seems to get hit with their neighbor’s sprinkler, or for the professional mobile detailer that is looking to improve his arsenal, the BLACKFIRE Paint and Glass Water Spot Remover Combo keeps every inch of your car spot-free!

BLACKFIRE Paint and Glass Water Spot Remover Combo includes:

32 oz. BLACKFIRE Glass Water Spot Remover
BLACKFIRE Water Spot Remover works to effortlessly break down the mineral deposits on your paint that cause water spots. BLACKFIRE Water Spot Remover is made using a safe formula that does not contain any acids or abrasives that could harm your paint, no matter what type of paint it is! Not only will BLACKFIRE Water Spot Remover get rid of the spots, it will also prevent them from occurring in the future thanks to the hydrophobic layer of protection it leaves behind.

32 oz. BLACKFIRE Water Spot Remover
BLACKFIRE Glass Water Spot Remover easily removes mild to moderate water spots that plague your glass surfaces and ruin the all-around look of your car. BLACKFIRE Glass Water Spot Remover also improves your safety while driving by increasing the clarity of your glass and improving your visibility. You don’t need to by any special tools to use BLACKFIRE Glass Water Spot Remover as it can be applied by hand or machine!

3 qty. Microfiber Applicator Pads
With over 200,000 strands of advanced microfibers per square inch, nothing matches its ability to remove dirt, residues, and surface oxidation. An 80/20 polyester/polyamide blend of “split” weave fibers, 100 times finer than a human hair, ensure smooth and even wax distribution. This advanced microfiber fabric is a lint free material. Microfiber Applicator Pads are angel hair soft, and completely non-abrasive, so they are safe to use on even the most delicate surfaces.

3 qty. Gold Plush Jr. Microfiber Towel, 16 x 16 inches
If you like the Deluxe Jr. 600 Microfiber Towel, you'll love having a second one in the Gold Plush Jr.! The Gold Plush Jr. Microfiber Towel is made of incredibly soft and plush microfiber in a handy 16 x 16 inch size. It's perfect for quick detailing and pampers every surface it touches.

Kit includes:
32 oz. BLACKFIRE Glass Water Spot Remover
32 oz. BLACKFIRE Water Spot Remover
3 qty. Microfiber Applicator Pads
3 qty. Gold Plush Jr. Microfiber Towel, 16 x 16 inches

A total retail value of $77.92. Save $27.93! "|"BLACKFIRE Paint and Glass Water Spot Remover Combo"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-gloss-enhancing-polish|BF-210|CUSTOM-ITEM|"BLACKFIRE Paint Cleaner"|"http://www.blackfirewax.com/blackfire-gloss-enhancing-polish.html"|(29.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

BLACKFIRE Paint Cleaner can be applied by hand or with a DA or orbital polisher.

BLACKFIRE Paint Cleaner is a remarkable finishing polish with a built-in glaze for the ultimate "wet-look." It visually reduces swirl marks while creating a deep gloss. It removes old waxes and sealants and cleans the paint's surface to prep it for a shiny coat of wax or paint sealant. Used before a wax or sealant, BLACKFIRE Paint Cleaner improves the gloss and clarity of the finish. Professionals and enthusiasts know that polishing is must for a show car shine!

BLACKFIRE Paint Cleaner is a pre-wax cleanser, non-abrasive polish, and glaze combination. It wets the surface to create the illusion of the paint being under water. This hides minor swirls and scratches without removing any paint or clear coat. It "rounds-over" the leading edge of minor swirls which robs sunlight of a sharp edge to cause a reflection. While this visually reduces swirls, it does not remove them. This is a great product to use on a vehicle in good condition with very few swirls.

Use Paint Cleaner to remove old wax, clean the top paint surface, visually reduce swirls and deepen the paint's gloss prior to wax or sealant application. It is extremely effective on all paint types, from antique lacquers to modern scratch resistant clear coats. When used under BLACKFIRE Paint Cleaner, it's pure magic! The combination of Paint Cleaner and Wet Diamond creates a liquid-like wetness that looks like you could reach into the finish. This combination is especially stunning on black, red and dark colors but still shimmers on white, grey and silver finishes.

If you have a show car, concours car, hot rod or just want a show-car shine on your daily driver, use BLACKFIRE Paint Cleaner and follow with a top coat of BLACKFIRE Paint Sealant.

Directions:

To use BLACKFIRE Paint Cleaner by hand, apply a nickel-size amount onto a microfiber or foam applicator and wipe onto the paint  using a circular motion until a haze starts to form. Remove immediately using a microfiber towel. Apply and remove to a small section at a time. To apply  with a dual-action or rotary polisher, use a finishing or polishing pad at medium speed. Work a small section until a haze starts to form and buff off to a brilliant shine using a microfiber towel.

 

32 oz.

"|""|""|""|""|""|""|""|"(:BLACKFIRE-GLOSS-POLISH :BLACKFIRE-GLOSS-ENHANCING-POLISH-5G)"|""||""|""|""|""|""|""||0| blackfire-gloss-polish|BF-210-128|CUSTOM-ITEM|"BLACKFIRE Paint Cleaner 128 oz."|"http://www.blackfirewax.com/blackfire-gloss-polish.html"|(84.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

BLACKFIRE Paint Cleaner can be applied by hand or with a DA or orbital polisher.

BLACKFIRE Paint Cleaner is a remarkable finishing polish with a built-in glaze for the ultimate "wet-look." It visually reduces swirl marks while creating a deep gloss. It removes old waxes and sealants and cleans the paint's surface to prep it for a shiny coat of wax or paint sealant. Used before a wax or sealant, BLACKFIRE Paint Cleaner improves the gloss and clarity of the finish. Professionals and enthusiasts know that polishing is must for a show car shine!

BLACKFIRE Paint Cleaner is a pre-wax cleanser, non-abrasive polish, and glaze combination. It wets the surface to create the illusion of the paint being under water. This hides minor swirls and scratches without removing any paint or clear coat. It "rounds-over" the leading edge of minor swirls which robs sunlight of a sharp edge to cause a reflection. While this visually reduces swirls, it does not remove them. This is a great product to use on a vehicle in good condition with very few swirls.

Use Paint Cleaner to remove old wax, clean the top paint surface, visually reduce swirls and deepen the paint's gloss prior to wax or sealant application. It is extremely effective on all paint types, from antique lacquers to modern scratch resistant clear coats. When used under BLACKFIRE Paint Cleaner, it's pure magic! The combination of Paint Cleaner and Wet Diamond creates a liquid-like wetness that looks like you could reach into the finish. This combination is especially stunning on black, red and dark colors but still shimmers on white, grey and silver finishes.

If you have a show car, concours car, hot rod or just want a show-car shine on your daily driver, use BLACKFIRE Paint Cleaner and follow with a top coat of BLACKFIRE Paint Sealant.

Directions:

To use BLACKFIRE Paint Cleaner by hand, apply a nickel-size amount onto a microfiber or foam applicator and wipe onto the paint using a circular motion until a haze starts to form. Remove immediately using a microfiber towel. Apply and remove to a small section at a time. To apply with a dual-action or rotary polisher, use a finishing or polishing pad at medium speed. Work a small section until a haze starts to form and buff off to a brilliant shine using a microfiber towel.

 

128 oz.

"|""|""|""|""|""|""|""|"(:BLACKFIRE-GLOSS-ENHANCING-POLISH-5G)"|""||""|""|""|""|""|""||0| blackfire-gloss-enhancing-polish-5g|BF-210-5G|CUSTOM-ITEM|"BLACKFIRE Paint Cleaner 5 Gallon"|"https://www.blackfirewax.com/blackfire-gloss-enhancing-polish-5g.html"|(339.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"

BLACKFIRE Paint Cleaner can be applied by hand or with a DA or orbital polisher.

BLACKFIRE Paint Cleaner is a remarkable finishing polish with a built-in glaze for the ultimate "wet-look." It visually reduces swirl marks while creating a deep gloss. It removes old waxes and sealants and cleans the paint's surface to prep it for a shiny coat of wax or paint sealant. Used before a wax or sealant, BLACKFIRE Paint Cleaner improves the gloss and clarity of the finish. Professionals and enthusiasts know that polishing is must for a show car shine!

BLACKFIRE Paint Cleaner is a pre-wax cleanser, non-abrasive polish, and glaze combination. It wets the surface to create the illusion of the paint being under water. This hides minor swirls and scratches without removing any paint or clear coat. It "rounds-over" the leading edge of minor swirls which robs sunlight of a sharp edge to cause a reflection. While this visually reduces swirls, it does not remove them. This is a great product to use on a vehicle in good condition with very few swirls.

Use Paint Cleaner to remove old wax, clean the top paint surface, visually reduce swirls and deepen the paint's gloss prior to wax or sealant application. It is extremely effective on all paint types, from antique lacquers to modern scratch resistant clear coats. When used under BLACKFIRE Paint Cleaner, it's pure magic! The combination of Paint Cleaner and Wet Diamond creates a liquid-like wetness that looks like you could reach into the finish. This combination is especially stunning on black, red and dark colors but still shimmers on white, grey and silver finishes.

If you have a show car, concours car, hot rod or just want a show-car shine on your daily driver, use BLACKFIRE Paint Cleaner and follow with a top coat of BLACKFIRE Paint Sealant.

Directions:

To use BLACKFIRE Paint Cleaner by hand, apply a nickel-size amount onto a microfiber or foam applicator and wipe onto the paint  using a circular motion until a haze starts to form. Remove immediately using a microfiber towel. Apply and remove to a small section at a time. To apply  with a dual-action or rotary polisher, use a finishing or polishing pad at medium speed. Work a small section until a haze starts to form and buff off to a brilliant shine using a microfiber towel.

 

5 Gallon (640 oz.)

This product is not available for expedited shipping.

"|"BLACKFIRE Paint Cleaner 5 Gallon"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-210-duo|BF-210-128-P|CUSTOM-ITEM|"BLACKFIRE Paint Cleaner Duo Pack"|"https://www.blackfirewax.com/bf-210-duo.html"|(114.99)|(85)|T|""|""|""|""|""|"

BLACKFIRE Paint Cleaner can be applied by hand or with a DA or orbital polisher.

BLACKFIRE Paint Cleaner is a remarkable finishing polish with a built-in glaze for the ultimate "wet-look." It visually reduces swirl marks while creating a deep gloss. It removes old waxes and sealants and cleans the paint's surface to prep it for a shiny coat of wax or paint sealant. Used before a wax or sealant, BLACKFIRE Paint Cleaner improves the gloss and clarity of the finish. Professionals and enthusiasts know that polishing is must for a show car shine!

BLACKFIRE Paint Cleaner is a pre-wax cleanser, non-abrasive polish, and glaze combination. It wets the surface to create the illusion of the paint being under water. This hides minor swirls and scratches without removing any paint or clear coat. It "rounds-over" the leading edge of minor swirls which robs sunlight of a sharp edge to cause a reflection. While this visually reduces swirls, it does not remove them. This is a great product to use on a vehicle in good condition with very few swirls.

Use Paint Cleaner to remove old wax, clean the top paint surface, visually reduce swirls and deepen the paint's gloss prior to wax or sealant application. It is extremely effective on all paint types, from antique lacquers to modern scratch resistant clear coats. When used under BLACKFIRE Paint Cleaner, it's pure magic! The combination of Paint Cleaner and Wet Diamond creates a liquid-like wetness that looks like you could reach into the finish. This combination is especially stunning on black, red and dark colors but still shimmers on white, grey and silver finishes.

If you have a show car, concours car, hot rod or just want a show-car shine on your daily driver, use BLACKFIRE Paint Cleaner and follow with a top coat of BLACKFIRE Paint Sealant.

Directions:

To use BLACKFIRE Paint Cleaner by hand, apply a nickel-size amount onto a microfiber or foam applicator and wipe onto the paint  using a circular motion until a haze starts to form. Remove immediately using a microfiber towel. Apply and remove to a small section at a time. To apply  with a dual-action or rotary polisher, use a finishing or polishing pad at medium speed. Work a small section until a haze starts to form and buff off to a brilliant shine using a microfiber towel.

 

32 oz.

"|"BLACKFIRE Paint Cleaner Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-paint-decon-combo|BF-185-CMB|CUSTOM-ITEM|"BLACKFIRE Paint Decon Combo"|"https://www.blackfirewax.com/bf-paint-decon-combo.html"|(101.29)|(69.99)|T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"For quick decontamination!

BLACKFIRE Paint Decon Combo is a must if you’re looking for perfect paint. Designed to both chemically (BLACKFIRE Iron Remover) and mechanically (BLACKFIRE Clay Mitt) decontaminate your paint, the BLACKFIRE Paint Decon Combo preps your paint for further perfection. Remove embedded iron and surface contaminants and work towards the best finish you’ve ever had! For the best results, you need the best products and the BLACKFIRE Paint Decon Combo is one of the best!

BLACKFIRE Paint Decon Combo includes:

32 oz. BLACKFIRE Iron Remover
BLACKFIRE Iron Remover is an easy-to-use, chemical paint decontamination product designed to remove large amount of iron and industrial fallout from your painted surfaces and wheels. The color-changing formula indicates proper application as the product changes from clear to purple as paint contaminants are removed! Paint decontamination is needed on even the newest cars; you can’t achieve a proper shine and finish without it! BLACKFIRE Iron Remover means less hard work for you, and a quicker detail time overall!

32 oz. BLACKFIRE Clay Lubricant
BLACKFIRE Clay Lubricant has a polymer rich formula allows clay to glide over the surface without sticking or scratching. The clay lubricant provides a slippery coating between the clay bar and the paint to protect the paint from grit picked up by the clay. Cleaners in BLACKFIRE Clay Lubricant remove clay residue as you work, keeping the paint cleaner. The lubricants condition synthetic clay bars to extend their usable life.

BLACKFIRE Clay Mitt
BLACKFIRE Clay Mitt is a specialized wash mitt that uses an advanced rubberized material to safely remove embedded contaminants in your paint. This synthetic coating works the way a traditional clay bar does, but with a lot less mess! BLACKFIRE Clay Mitt will safely remove over-spray, road grime, dirt, industrial fall-out, tree sap and more with just one pass! Engineered as a two-in-one tool, the BLACKFIRE Clay Mitt works as both a wash mitt AND a method of decontamination!

2 qty. Grey All Purpose Microfiber Towels, 16 x 16 inches
The All Purpose Towels are made entirely in China and we’re very pleased with their quality. Not only do they share the distinctive split-weave, they are just as safe on the surfaces of your vehicle. The durability of the Korean-made towels is unmatched, but I’ve found at least a dozen uses for my All Purpose Towels. These All Purpose Microfiber Towels are safe on glass, paint, clear coat, and any other surface. For general cleaning in and around your garage and vehicle, you can’t beat the value.

Kit includes:
32 oz. BLACKFIRE Iron Remover
32 oz. BLACKFIRE Clay Lubricant
BLACKFIRE Clay Mitt
2 qty. Grey All Purpose Microfiber Towels, 16 x 16 inches

A total retail value of $101.29. You save $31.30! "|"BLACKFIRE Paint Decon Combo"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-decon-deluxe-kit|BF-185-DKIT|CUSTOM-ITEM|"BLACKFIRE Paint Decon Deluxe Kit"|"https://www.blackfirewax.com/bf-decon-deluxe-kit.html"|(136.94)|(94.99)|T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"What paint contamination!?

BLACKFIRE Paint Decon Deluxe Kit was created with one thing in mind – extremely decontaminated paint! Allowing you to both chemically and mechanically decontaminate your paint, the BLACKFIRE Paint Decon Deluxe Kit prepares your paint for the next detailing level. After one treatment with the BLACKFIRE Paint Decon Deluxe Kit, your paint will be ready for compounding, polishing, coating, and more!

BLACKFIRE Paint Decon Deluxe Kit includes:

32 oz. BLACKFIRE Iron Remover
BLACKFIRE Iron Remover is an easy-to-use, chemical paint decontamination product designed to remove large amount of iron and industrial fallout from your painted surfaces and wheels. The color-changing formula indicates proper application as the product changes from clear to purple as paint contaminants are removed! Paint decontamination is needed on even the newest cars; you can’t achieve a proper shine and finish without it! BLACKFIRE Iron Remover means less hard work for you, and a quicker detail time overall!

32 oz. BLACKFIRE Car Wash
BLACKFIRE Car Wash cleans your vehicle and renews the shine every time you wash your car. BLACKFIRE's tri-polymers replenish and reinforce existing paint protection. Incredible Tuff Suds II technology creates mountains of suds to help float away grime and dirt, without scratching the finish. Drying agents help reduce water spotting and make drying easier. BLACKFIRE Car Wash helps your vehicle look just waxed after every wash!

32 oz. BLACKFIRE Clay Lubricant
BLACKFIRE Clay Lubricant has a polymer rich formula allows clay to glide over the surface without sticking or scratching. The clay lubricant provides a slippery coating between the clay bar and the paint to protect the paint from grit picked up by the clay. Cleaners in BLACKFIRE Clay Lubricant remove clay residue as you work, keeping the paint cleaner. The lubricants condition synthetic clay bars to extend their usable life.

Supreme Micro-Chenille Wash Mitt
Our Supreme Micro-Chenille Wash Mitt has 40% larger microfiber fingers than our standard micro-chenille wash mitts! This wash mitt has all the paint-pampering features of the original mitt plus superior durability and a larger size. The Supreme Micro-Chenille Wash Mitt lathers your vehicle in suds for a safe, swirl-free wash!

BLACKFIRE Clay Mitt
BLACKFIRE Clay Mitt is a specialized wash mitt that uses an advanced rubberized material to safely remove embedded contaminants in your paint. This synthetic coating works the way a traditional clay bar does, but with a lot less mess! BLACKFIRE Clay Mitt will safely remove over-spray, road grime, dirt, industrial fall-out, tree sap and more with just one pass! Engineered as a two-in-one tool, the BLACKFIRE Clay Mitt works as both a wash mitt AND a method of decontamination!

3 qty. Grey All Purpose Microfiber Towels, 16 x 16 inches
The All Purpose Towels are made entirely in China and we’re very pleased with their quality. Not only do they share the distinctive split-weave, they are just as safe on the surfaces of your vehicle. The durability of the Korean-made towels is unmatched, but I’ve found at least a dozen uses for my All Purpose Towels. These All Purpose Microfiber Towels are safe on glass, paint, clear coat, and any other surface. For general cleaning in and around your garage and vehicle, you can’t beat the value.

Kit includes:
32 oz. BLACKFIRE Iron Remover
32 oz. BLACKFIRE Car Wash
32 oz. BLACKFIRE Clay Lubricant
Supreme Micro-Chenille Wash Mitt
BLACKFIRE Clay Mitt
3 qty. Grey All Purpose Microfiber Towels, 16 x 16 inches

A total retail value of $136.94. You save $41.94! "|"BLACKFIRE Paint Decon Deluxe Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-paint-prep|BF-340|CUSTOM-ITEM|"BLACKFIRE Paint Prep"|"https://www.blackfirewax.com/blackfire-paint-prep.html"|(24.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"Perfectly prep you paint for any finishing product!

Blackfire Paint Prep will allow you to prep the surface of your paint for your favorite finishing product. Blackfire Paint Prep is formulated with effective cleaners and solvents that will not leave any marring or scratching behind on your paint. Blackfire Paint Prep eliminate the polishing oils, dust, fillers, and fingerprints that are on your paint, ensuring that the finishing product of your choice will adhere properly and is being applied to the most flawless surface possible. Blackfire Paint Prep has a very simple spray and wipe application that will ensure your surface is prepped quickly and efficiently.

When you are preparing to apply a coating or another finishing product to your paint, you need to make sure that the paint surface is properly prepped beforehand. There are many different contaminants that can exist on your paint even after you have spent hours carefully polishing every imperfection out of the surface. The surface could still be riddled with polished oils, dust, or fillers. All of these things will not only impact the look of your paint, but it will also prevent your choice of finishing product from properly adhering to the surface. Blackfire Paint Prep contains agents in its specially designed formula that will effectively target the contaminants on your paint and eradicate them. With these contaminants eliminated, you will finally be able to achieve the gloss you dreamed and ensure that any finishing product you apply will adhere to the surface fully.

There are other products on the market that promise that same results that Blackfire Paint Prep promises, however, they typically do so with harsh chemicals that can be extremely damaging to the paint surface. These chemicals can scratch and mar the paint surface, ruining the surface that you just spent hours methodically polishing. There is no point in removing all of the contaminants from the paint if you are just going to replace them with scratches and marring. Blackfire Paint Prep has an innovative formula that does not contain any harmful or harsh chemicals that would ruin your perfect finish.

---

---

DIRECTIONS:
-Apply on a cool surface and out of direct sunlight.
-Spray BLACKFIRE Paint Prep onto the surface that you are prepping.
-Wipe the surface clean with a dry microfiber towel.

32 oz. "|"BLACKFIRE Paint Prep"|""|""|""|""|""|""|"(:BLACKFIRE-PAINT-PREP-128 :BLACKFIRE-PAINT-PREP-5G)"|""||""|""|""|""|""|""||0| blackfire-paint-prep-128|BF-340-128|CUSTOM-ITEM|"BLACKFIRE Paint Prep 128 oz."|"https://www.blackfirewax.com/blackfire-paint-prep-128.html"|(59.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"Perfectly prep you paint for any finishing product!

Blackfire Paint Prep will allow you to prep the surface of your paint for your favorite finishing product. Blackfire Paint Prep is formulated with effective cleaners and solvents that will not leave any marring or scratching behind on your paint. Blackfire Paint Prep eliminate the polishing oils, dust, fillers, and fingerprints that are on your paint, ensuring that the finishing product of your choice will adhere properly and is being applied to the most flawless surface possible. Blackfire Paint Prep has a very simple spray and wipe application that will ensure your surface is prepped quickly and efficiently.

When you are preparing to apply a coating or another finishing product to your paint, you need to make sure that the paint surface is properly prepped beforehand. There are many different contaminants that can exist on your paint even after you have spent hours carefully polishing every imperfection out of the surface. The surface could still be riddled with polished oils, dust, or fillers. All of these things will not only impact the look of your paint, but it will also prevent your choice of finishing product from properly adhering to the surface. Blackfire Paint Prep contains agents in its specially designed formula that will effectively target the contaminants on your paint and eradicate them. With these contaminants eliminated, you will finally be able to achieve the gloss you dreamed and ensure that any finishing product you apply will adhere to the surface fully.

There are other products on the market that promise that same results that Blackfire Paint Prep promises, however, they typically do so with harsh chemicals that can be extremely damaging to the paint surface. These chemicals can scratch and mar the paint surface, ruining the surface that you just spent hours methodically polishing. There is no point in removing all of the contaminants from the paint if you are just going to replace them with scratches and marring. Blackfire Paint Prep has an innovative formula that does not contain any harmful or harsh chemicals that would ruin your perfect finish.

After you have spent hours polishing your car’s surface, the last thing you want to do is have to spend another hour or so prepping it for your finishing product. Blackfire Paint Prep has an extraordinarily easy application process that will allow you to prep your entire paint surface in less than 30 minutes. All you have to do is spray Blackfire Paint Prep onto the paint surface that you are trying prep and then wipe the surface using a clean, dry microfiber towel. Once you have done that, you are ready to apply your finishing process. Always apply Blackfire Paint Prep to a cool surface that it out of direct sunlight. "|"BLACKFIRE Paint Prep 128 oz."|""|"blackfire-paint-protection blackfire-black-ice-hybrid-montan-sealant-wax cobra-supreme-530-towel"|""|""|""|""|"(:BLACKFIRE-PAINT-PREP-5G)"|""||""|""|""|""|""|""||0| blackfire-paint-prep-5g|BF-340-5G|CUSTOM-ITEM|"BLACKFIRE Paint Prep 5 Gallon"|"https://www.blackfirewax.com/blackfire-paint-prep-5g.html"|(259.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Perfectly prep you paint for any finishing product!

BLACKFIRE Paint Prep will allow you to prep the surface of your paint for your favorite finishing product. BLACKFIRE Paint Prep is formulated with effective cleaners and solvents that will not leave any marring or scratching behind on your paint. BLACKFIRE Paint Prep eliminate the polishing oils, dust, fillers, and fingerprints that are on your paint, ensuring that the finishing product of your choice will adhere properly and is being applied to the most flawless surface possible. BLACKFIRE Paint Prep has a very simple spray and wipe application that will ensure your surface is prepped quickly and efficiently.

When you are preparing to apply a coating or another finishing product to your paint, you need to make sure that the paint surface is properly prepped beforehand. There are many different contaminants that can exist on your paint even after you have spent hours carefully polishing every imperfection out of the surface. The surface could still be riddled with polished oils, dust, or fillers. All of these things will not only impact the look of your paint, but it will also prevent your choice of finishing product from properly adhering to the surface. BLACKFIRE Paint Prep contains agents in its specially designed formula that will effectively target the contaminants on your paint and eradicate them. With these contaminants eliminated, you will finally be able to achieve the gloss you dreamed and ensure that any finishing product you apply will adhere to the surface fully.

There are other products on the market that promise that same results that BLACKFIRE Paint Prep promises, however, they typically do so with harsh chemicals that can be extremely damaging to the paint surface. These chemicals can scratch and mar the paint surface, ruining the surface that you just spent hours methodically polishing. There is no point in removing all of the contaminants from the paint if you are just going to replace them with scratches and marring. BLACKFIRE Paint Prep has an innovative formula that does not contain any harmful or harsh chemicals that would ruin your perfect finish.

After you have spent hours polishing your car’s surface, the last thing you want to do is have to spend another hour or so prepping it for your finishing product. BLACKFIRE Paint Prep has an extraordinarily easy application process that will allow you to prep your entire paint surface in less than 30 minutes. All you have to do is spray BLACKFIRE Paint Prep onto the paint surface that you are trying prep and then wipe the surface using a clean, dry microfiber towel. Once you have done that, you are ready to apply your finishing process. Always apply BLACKFIRE Paint Prep to a cool surface that it out of direct sunlight.

5 Gallons (640 oz.)

This product is not available for expedited shipping.

"|"BLACKFIRE Paint Prep 5 Gallon"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-340-duo|BF-340-128-P|CUSTOM-ITEM|"BLACKFIRE Paint Prep Duo Pack"|"https://www.blackfirewax.com/bf-340-duo.html"|(84.98)|(59.99)|T|""|""|""|""|""|"Perfectly prep you paint for any finishing product!

Blackfire Paint Prep will allow you to prep the surface of your paint for your favorite finishing product. Blackfire Paint Prep is formulated with effective cleaners and solvents that will not leave any marring or scratching behind on your paint. Blackfire Paint Prep eliminate the polishing oils, dust, fillers, and fingerprints that are on your paint, ensuring that the finishing product of your choice will adhere properly and is being applied to the most flawless surface possible. Blackfire Paint Prep has a very simple spray and wipe application that will ensure your surface is prepped quickly and efficiently.

When you are preparing to apply a coating or another finishing product to your paint, you need to make sure that the paint surface is properly prepped beforehand. There are many different contaminants that can exist on your paint even after you have spent hours carefully polishing every imperfection out of the surface. The surface could still be riddled with polished oils, dust, or fillers. All of these things will not only impact the look of your paint, but it will also prevent your choice of finishing product from properly adhering to the surface. Blackfire Paint Prep contains agents in its specially designed formula that will effectively target the contaminants on your paint and eradicate them. With these contaminants eliminated, you will finally be able to achieve the gloss you dreamed and ensure that any finishing product you apply will adhere to the surface fully.

There are other products on the market that promise that same results that Blackfire Paint Prep promises, however, they typically do so with harsh chemicals that can be extremely damaging to the paint surface. These chemicals can scratch and mar the paint surface, ruining the surface that you just spent hours methodically polishing. There is no point in removing all of the contaminants from the paint if you are just going to replace them with scratches and marring. Blackfire Paint Prep has an innovative formula that does not contain any harmful or harsh chemicals that would ruin your perfect finish.

---

---

After you have spent hours polishing your car’s surface, the last thing you want to do is have to spend another hour or so prepping it for your finishing product. Blackfire Paint Prep has an extraordinarily easy application process that will allow you to prep your entire paint surface in less than 30 minutes. All you have to do is spray Blackfire Paint Prep onto the paint surface that you are trying prep and then wipe the surface using a clean, dry microfiber towel. Once you have done that, you are ready to apply your finishing process. Always apply Blackfire Paint Prep to a cool surface that it out of direct sunlight. "|"BLACKFIRE Paint Prep"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-paint-protection|BF-300|CUSTOM-ITEM|"BLACKFIRE Paint Sealant"|"http://www.blackfirewax.com/blackfire-paint-protection.html"|(59.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

BLACKFIRE Paint Sealant can be applied by hand or with a DA or orbital polisher.

BLACKFIRE Paint Sealant is a premium paint sealant designed for the perfectionist. It creates an extremely slick finish and incredible depth with a revolutionary blend of three incredible polymers.  Sourced from Germany and Switzerland, these polymers have a protective quality and depth of gloss that surpassed all others tested. BLACKFIRE Paint Sealant refracts light, similar to a diamond, to create a vibrant, super slippery, head-turning finish.

BLACKFIRE Paint Sealant is the state-of-the-art paint sealant. The tri-polymer system results in a true blanket of protection on your paint. It is almost impenetrable to environmental fall-out and contamination. The increased surface area of active polymers creates a microscopically level surface that reflects light across the spectrum and creates a super slick surface with little drag. You can feel the Wet Diamond polymers at work. Because each of the Wet Diamond polymers reflect and refract light differently, you are left with a look that is unique and without compromise. We have achieved the depth and shimmer (created by bending the light) of a carnauba wax, while maintaining the characteristic high-gloss shine of a paint sealant.

But the unique dripping wet look of BLACKFIRE Paint Sealant is only the beginning of the story. The Wet Diamond polymers form a tight matrix of protection on the surface of your vehicle. This sealant has it all: looks, durability, and the ability to protect your paint from acid rain, bug remains, contamination, environmental fallout, and water spots. BLACKFIRE Paint Sealant is further boosted with Polycharger for maximum shine, slickness, and longevity.

BLACKFIRE Paint Sealant can be used by itself as a final sealant or as the foundation of BLACKFIRE's signature Wet Ice Over Fire shine.

 

Directions:

Apply BLACKFIRE Paint Sealant by hand or dual-action polisher using a soft applicator pad. Apply a thin even coat over the entire surface and allow to dry to a haze. Hand buff to a brilliant shine with a microfiber towel. For best results, clay the paint first with BLACKFIRE Poly Clay and polish with BLACKFIRE Paint Cleaner or BLACKFIRE Polish.

32 oz.

"|""|""|""|""|""|""|""|"(:ALL-FINISH-PAINT-PROTECTION)"|""||""|""|""|""|""|""|5|1| all-finish-paint-protection|BF-300-128|CUSTOM-ITEM|"BLACKFIRE Paint Sealant 128 oz."|"http://www.blackfirewax.com/all-finish-paint-protection.html"|(179.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

BLACKFIRE Paint Sealant can be applied by hand or with a DA or orbital polisher.

BLACKFIRE Paint Sealant is a premium paint sealant designed for the perfectionist. It creates an extremely slick finish and incredible depth with a revolutionary blend of three incredible polymers. Sourced from Germany and Switzerland, these polymers have a protective quality and depth of gloss that surpassed all others tested. BLACKFIRE Paint Sealant refracts light, similar to a diamond, to create a vibrant, super slippery, head-turning finish.

BLACKFIRE Paint Sealant is the state-of-the-art paint sealant. The tri-polymer system results in a true blanket of protection on your paint. It is almost impenetrable to environmental fall-out and contamination. The increased surface area of active polymers creates a microscopically level surface that reflects light across the spectrum and creates a super slick surface with little drag. You can feel the polymers at work. Because each of the polymers reflect and refract light differently, you are left with a look that is unique and without compromise. We have achieved the depth and shimmer (created by bending the light) of a carnauba wax, while maintaining the characteristic high-gloss shine of a paint sealant.

But the unique dripping wet look of BLACKFIRE Paint Sealant is only the beginning of the story. The polymers form a tight matrix of protection on the surface of your vehicle. This sealant has it all: looks, durability, and the ability to protect your paint from acid rain, bug remains, contamination, environmental fallout, and water spots. BLACKFIRE Paint Sealant is further boosted with Polycharger for maximum shine, slickness, and longevity.

BLACKFIRE Paint Sealant can be used by itself as a final sealant or as the foundation of BLACKFIRE's signature Wet Ice Over Fire shine.

Directions:

Apply BLACKFIRE Paint Sealant by hand or dual-action polisher using a soft applicator pad. Apply a thin even coat over the entire surface and allow to dry to a haze. Hand buff to a brilliant shine with a microfiber towel. For best results, clay the paint first with BLACKFIRE Poly Clay and polish with BLACKFIRE Paint Cleaner or BLACKFIRE Polish.

128 oz.

"|""|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-paint-sealant-16|BF-300-16|CUSTOM-ITEM|"BLACKFIRE Paint Sealant 16 oz."|"https://www.blackfirewax.com/blackfire-paint-sealant-16.html"|(34.99)||T|""|""|""|""|""|"

BLACKFIRE Paint Sealant can be applied by hand or with a DA or orbital polisher.

BLACKFIRE Paint Sealant is a premium paint sealant designed for the perfectionist. It creates an extremely slick finish and incredible depth with a revolutionary blend of three incredible polymers. Sourced from Germany and Switzerland, these polymers have a protective quality and depth of gloss that surpassed all others tested. BLACKFIRE Paint Sealant refracts light, similar to a diamond, to create a vibrant, super slippery, head-turning finish.

BLACKFIRE Paint Sealant is the state-of-the-art paint sealant. The tri-polymer system results in a true blanket of protection on your paint. It is almost impenetrable to environmental fall-out and contamination. The increased surface area of active polymers creates a microscopically level surface that reflects light across the spectrum and creates a super slick surface with little drag. You can feel the Wet Diamond polymers at work. Because each of the Wet Diamond polymers reflect and refract light differently, you are left with a look that is unique and without compromise. We have achieved the depth and shimmer (created by bending the light) of a carnauba wax, while maintaining the characteristic high-gloss shine of a paint sealant.

But the unique dripping wet look of BLACKFIRE Paint Sealant is only the beginning of the story. The Wet Diamond polymers form a tight matrix of protection on the surface of your vehicle. This sealant has it all: looks, durability, and the ability to protect your paint from acid rain, bug remains, contamination, environmental fallout, and water spots. BLACKFIRE Paint Sealant is further boosted with Polycharger for maximum shine, slickness, and longevity.

BLACKFIRE Paint Sealant can be used by itself as a final sealant or as the foundation of BLACKFIRE's signature Wet Ice Over Fire shine.

 

Directions:

Apply BLACKFIRE Paint Sealant by hand or dual-action polisher using a soft applicator pad. Apply a thin even coat over the entire surface and allow to dry to a haze. Hand buff to a brilliant shine with a microfiber towel. For best results, clay the paint first with BLACKFIRE Poly Clay and polish with BLACKFIRE Paint Cleaner or BLACKFIRE Polish.

16 oz.

"|""|""|""|""|""|""|""|"(:BLACKFIRE-PAINT-PROTECTION :ALL-FINISH-PAINT-PROTECTION)"|""||""|""|""|""|""|""||0| bf-300-duo|BF-300-128-P|CUSTOM-ITEM|"BLACKFIRE Paint Sealant Duo Pack"|"https://www.blackfirewax.com/https://www.blackfirewax.com/blackfire-paint-protection.html.html"|(209.98)|(159.99)|T|""|""|""|""|""|"

BLACKFIRE Paint Sealant can be applied by hand or with a DA or orbital polisher.

BLACKFIRE Paint Sealant is a premium paint sealant designed for the perfectionist. It creates an extremely slick finish and incredible depth with a revolutionary blend of three incredible polymers.  Sourced from Germany and Switzerland, these polymers have a protective quality and depth of gloss that surpassed all others tested. BLACKFIRE Paint Sealant refracts light, similar to a diamond, to create a vibrant, super slippery, head-turning finish.

BLACKFIRE Paint Sealant is the state-of-the-art paint sealant. The tri-polymer system results in a true blanket of protection on your paint. It is almost impenetrable to environmental fall-out and contamination. The increased surface area of active polymers creates a microscopically level surface that reflects light across the spectrum and creates a super slick surface with little drag. You can feel the Wet Diamond polymers at work. Because each of the Wet Diamond polymers reflect and refract light differently, you are left with a look that is unique and without compromise. We have achieved the depth and shimmer (created by bending the light) of a carnauba wax, while maintaining the characteristic high-gloss shine of a paint sealant.

But the unique dripping wet look of BLACKFIRE Paint Sealant is only the beginning of the story. The Wet Diamond polymers form a tight matrix of protection on the surface of your vehicle. This sealant has it all: looks, durability, and the ability to protect your paint from acid rain, bug remains, contamination, environmental fallout, and water spots. BLACKFIRE Paint Sealant is further boosted with Polycharger for maximum shine, slickness, and longevity.

BLACKFIRE Paint Sealant can be used by itself as a final sealant or as the foundation of BLACKFIRE's signature Wet Ice Over Fire shine.

 

Directions:

Apply BLACKFIRE Paint Sealant by hand or dual-action polisher using a soft applicator pad. Apply a thin even coat over the entire surface and allow to dry to a haze. Hand buff to a brilliant shine with a microfiber towel. For best results, clay the paint first with BLACKFIRE Poly Clay and polish with BLACKFIRE Paint Cleaner or BLACKFIRE Polish.

32 oz.

"|"BLACKFIRE Paint Sealant"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-paint-wash-iron-purification-kit1|BF-195GRKT|CUSTOM-ITEM|"BLACKFIRE Paint Wash & Iron Purification Kit"|"https://www.blackfirewax.com/bf-paint-wash-iron-purification-kit.html"|(78.96)|(54.99)|T|""|""|""|""|""|" Wash away iron contaminants!

The BLACKFIRE Iron Gel Remover Kit is your answer to washing away contaminants. In this kit, you get the BLACKFIRE Iron Remover Gel that is designed to change color as it removes harmful iron particles that are building up on your car’s surface. BLACKFIRE Car Wash is formulated to wash and shine your vehicle, also while reinforcing existing paint protection. The Cobra Supreme Micro-Chenille Wash Mitt is the perfect tool for a comfortable wash down of your car, with swirl free finish. To finish the job, the Cobra Guzzler Waffle Weave Towel has high absorbency powers to soak up remaining water.

---

---

Items in this kit:

BLACKFIRE Iron Remover Gel

BLACKFIRE Iron Remover Gel is a formula designed to remove unwanted iron particles from painted surfaces. The thick formula of BLACKFIRE Iron Remover Gel clings to the surface and allows for a longer work time for extreme contaminant removal. BLACKFIRE Iron Remover Gel features a unique active ingredient that changes color when it interacts with iron particles and is easily rinsed away. Plus, BLACKFIRE Iron Remover Gel is easy-to-use!

BLACKFIRE Car Wash

BLACKFIRE Car Wash cleans your vehicle and renews the shine every time you wash your car. BLACKFIRE's tri-polymers replenish and reinforce existing paint protection. Incredible Tuff Suds II technology creates mountains of suds to help float away grime and dirt, without scratching the finish. Drying agents help reduce water spotting and make drying easier. BLACKFIRE Car Wash helps your vehicle look just waxed after every wash!

Cobra Supreme Micro-Chenille Wash Mitt

Our Supreme Micro-Chenille Wash Mitt has 40% larger microfiber fingers than our standard micro-chenille wash mitts! This wash mitt has all the paint-pampering features of the original mitt plus superior durability and a larger size. The Supreme Micro-Chenille Wash Mitt lathers your vehicle in suds for a safe, swirl-free wash!

Cobra Guzzler Waffle Weave Towel

The Guzzler Waffle Weave Microfiber Drying Towel is a soft, plush waffle weave towel with a strip of silky soft satin sewn around the edges. The satin is just one more safeguard against swirls and scratches. An ordinary waffle weave towel is bound at the edges with regular cotton thread. While the thread isn’t abrasive, it’s not as soft or as fine as microfiber. After washing and drying the towel a few times, the thread may shrink some and make the edges of the towel feel stiff. The satin trim on The Guzzler covers the exposed stitching so it cannot possibly scratch. Also, the strip of satin is continuous. It rounds the corner of the towel and only has one seam.

Kit includes:
1 32 oz. BLACKFIRE Iron Remover Gel
1 32 oz. BLACKFIRE Car Wash
1 16x24” Cobra Guzzler Waffle Weave Towel
1 Cobra Supreme Micro-Chenille Wash Mitt

A total retail value of $76.96. Save $16.97! "|"BLACKFIRE Paint Wash & Iron Purification Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-plex-pro|BF-295|CUSTOM-ITEM|"BLACKFIRE Plex Pro Plastic Cleaner & Protectant"|"https://www.blackfirewax.com/bf-plex-pro.html"|(14.99)||T|""|""|""|""|""|"Keeps ALL your plastic surface looking better than new!

Blackfire Plex Pro is the perfect solution to the problem that many detailers run into frequently, dull, dirty, and dinged plastic. Blackfire Plex Pro can be used to not only thoroughly clean your plastic surfaces, but protect them from future damage, mess, and fogging as well! Because Blackfire Plex Pro doesn’t use any harsh chemicals or abrasives, you won’t have to worry about any potential damage cause during the cleaning/protecting process!

Plastic is notorious for being one of the most difficult surfaces to clean and protect. This is due to the fact that many plastic surfaces, particularly interior plastic, generate a large amount of static electricity. This static electricity cause dust and other light contaminants to flock to and stick to the surface much more strongly than the other surfaces in and on your car. Blackfire Plex Pro was designed to act as a barrier between your plastic surfaces and the contaminants that it attracts. Blackfire Plex Pro has an anti-static quality to it that will ensure your plastic not only stops attracting dust, but actively REPELS dust away!

This repelling effect is not just confined to dust, Blackfire Plex Pro prevents all sort of unsightly things from finding their way onto your plastic surfaces. Streaks, smudges, dirt, and even fog will be effectively repelled from your plastic surfaces with the use of Blackfire Plex Pro!

---

BLACKFIRE Plex Pro quickly cleans clear plastic surfaces simply using a spray and wipe technique. Remove dirt, dust, smudges, and more quickly and easily!

---

Because plastic is easily damaged, you have to be very selective with the products you use on it. Plastic is very sensitive to scratches and removing those scratches can be quite difficult. Blackfire Plex Pro was designed without any abrasives, so it won’t cause any scratches or marring during use!

In addition to scratches, plastic is also quite prone to serious damage from strong chemical cleaners. Some APCs are known to contain corrosive cleaners that will eat away at your plastic surface and leave permanent damage behind. Blackfire Plex Pro uses only safe and mild cleaner agents that will not cause any damage to your sensitive surfaces.

Blackfire Plex Pro doesn’t stop at plastic though! You can use Blackfire Plex Pro to clean and protect your chrome, Formica, porcelain, fiberglass, and marble, all with the same incredible results!

Use BLACKFIRE Plex Pro on:
• Acrylic plastics
• Clear plastics
• Colored plastics
• Plexiglas
• Lexan
• Polycarbonates
• Headlights
• Windscreens

Directions:
Shake well before use. Holding the can in an upright position approximately 6-8 inches away, spray Plex Pro onto the surface to be treated. If surface is dirty, this spray can be used to clean and a re-spray can be used to polish and protect. Wipe surface using a clean microfiber towel. Additional coats will increase protection and resistance against wear and scratching.

19 oz.

Federal regulations prohibit the shipment of aerosol products by air. This item is shipped by UPS Ground only.

"|"BLACKFIRE Plex Pro Plastic Cleaner & Protectant"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-220-128|BF-220-128|CUSTOM-ITEM|"BLACKFIRE Polish 128 oz."|"http://www.blackfirewax.com/bf-220-128.html"|(134.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

Your first step to creating perfection on all paint finishes!

BLACKFIRE Compound was developed using the latest German technology for OEM applications. It removes up to 1,000 grit sanding scratches on fresh paint and an impressive range of imperfections from cured paint finishes. Application is user-friendly with a dual-action orbital or rotary polisher. BLACKFIRE Compound is the first step in creating a head-turning shine!

When used with an Orange Light Cutting Pad, swirl marks and other imperfections are removed with ease!

This is a companion product to BLACKFIRE Polish designed to remove deeper swirls, scratches and defects in ceramic particle and scratch-resistant clear coats. This is the same abrasive technology used at the OEM level by German and domestic automakers. Use BLACKFIRE Compound on paint flaws that cannot be removed with BLACKFIRE Polish.

BLACKFIRE Compound is designed for machine application with either a dual action or rotary/circular machine polisher. Most 2,000 grit and deeper swirls, scratches, spots and defects in ceramic particle and scratch-resistant clear coats cannot be removed by hand. BLACKFIRE Compound provides the muscle needed to level imperfections in all types of paint.

For the best results, apply BLACKFIRE Compound with a dual action polisher using a CCS Orange Light Cutting Pad. These orange pads are used at the OEM level on ceramic particle and scratch-resistant clear coats.

BLACKFIRE Compound is designed to remove imperfections from the paint without dulling the surface or creating compounding haze. After compounding, use BLACKFIRE Polish with a clean polishing pad to further enhance surface gloss.

Flawless paint starts with BLACKFIRE Compound!

 

Directions for use:

Work out of direct sunlight.

Hand application - Apply with a dense foam applicator or microfiber applicator. Mist clean pad with pad conditioner. Apply a nickel-sized amount of Compound onto applicator. Work on a 2 x 2 sq. ft. area. Wipe compound over paint using short, firm strokes until polish starts to turn clear. Wipe off immediately using a microfiber towel. Machine application - Wok on a 2 x 2 sq. ft. area. Mist a clean foam cutting pad with pad conditioner. Apply an X of compound onto the pad. Spread the compound over one section with the machine turned off. Set the speed at 5-6 on a dual action polisher or 1,200 - 1,500 RPM on a rotary polisher. Work the compound over the surface using moderate pressure until it begins to turn clear. Buff of compound by hand using a microfiber towel.

128 oz.

"|"BLACKFIRE SRC Finishing Polish"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| src-finishing-polish|BF-220|CUSTOM-ITEM|"BLACKFIRE Polish 32 oz."|"http://www.blackfirewax.com/src-finishing-polish.html"|(49.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

Your first step to creating perfection on all paint finishes!

BLACKFIRE Polish uses nano abrasives to remove 2,500-3,000 grit sanding marks on fresh paints and to correct mild imperfections on cured paints. These fine abrasives burnish the finish to an incredible gloss! BLACKFIRE Polish can be used to refine the paint after compounding or as a one-step shine enhancing polish.

In 2005, Mercedes Benz started using a nano, ceramic particle, clear coat and in 2006 domestic automakers started using a super-hard, scratch-resistant clear coat developed by both PPG and BASF. These new clear coats are scratch-resistant, not scratch proof. They can still be scratched and spotted. The problem is polishing, or removing defects, in these new, super-hard clear coats. Conventional polishes may not have the cutting power to remove swirls, spots and defects in these new coatings.

BLACKFIRE Polish is designed for machine application with either a dual action or rotary/circular machine polisher. Most 2,000 grit and deeper swirls, scratches, spots and defects in ceramic particle and scratch-resistant clear coats cannot be removed by hand. BLACKFIRE Polish provides the muscle needed to level imperfections in all types of paint.

To stay on top of paint innovations, BLACKFIRE incorporated cutting edge German abrasives to develop a compound and polish to remove defects in the new nano ceramic particle clear coats. This new breed of polishes is currently used at the OEM level in various auto manufacturing plants worldwide and they are considered within the polishing industry to be the most advanced polishes in the world.

The result of the this German-American collaboration is BLACKFIRE Polish. This formula offers the do-it-yourself, enthusiast the ability to create a truly eye-popping shine! It restores gloss to ceramic particle clear coats, scratch resistant clear coats, as well as in more traditional single stage and two stage paint systems.

Flawless paint starts with BLACKFIRE Polish!

 

Directions for use:

Work out of direct sunlight.

For best results by hand apply BLACKFIRE Polish a microfiber applicator or foam applicator pad. Apply a nickel-sized amount of polish to the applicator and work one a 2 sq. ft. area at a time, using short firm strokes until the polish begins to dry. Buff off residues with by hand using a microfiber towel. For best results by machine polisher, apply with a polishing or finishing pad using a dual-action orbital or rotary polisher. Polish areas approximately 2 sq. ft. in size using moderate speed (speed 4-5 on a dual-action polisher or 800-1,000 rpm on a rotary polisher) working in overlapping passes until the polish becomes clear. Hand buff residue with a microfiber towel. Follow with BLACKFIRE Paint Sealant for an intense shine!

32 oz.

"|"BLACKFIRE Polish 32 oz."|""|""|""|""|""|""|"(:BF-220-128)"|""||""|""|""|""|""|""||0| blackfire-polish-8|BF-220-8|CUSTOM-ITEM|"BLACKFIRE Polish 8 oz."|"https://www.blackfirewax.com/blackfire-polish-8.html"|(28.99)||T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"

The best polish for any type of finish!

BLACKFIRE Polish uses nano-abrasives to remove 2500-3000 grit sanding marks on fresh paints and to correct mild imperfections on cured paints. These fine abrasives burnish the finish to an incredible gloss! BLACKFIRE Polish can be used to refine the paint after compounding or as a one-step shine enhancing polish.

In 2005, Mercedes Benz started using a nano, ceramic particle, clear coat and in 2006 domestic automakers started using a super-hard, scratch-resistant clear coat developed by both PPG and BASF. These new clear coats are scratch-resistant, not scratch proof. They can still be scratched and spotted. The problem is polishing, or removing defects, in these new, super-hard clear coats. Conventional polishes may not have the cutting power to remove swirls, spots and defects in these new coatings.

To stay on top of paint innovations, BLACKFIRE incorporated cutting edge German abrasives to develop a compound and polish to remove defects in the new clear coats. This new breed of polishes is currently used at the OEM level in various auto manufacturing plants worldwide and they are considered within the polishing industry to be the most advanced polishes in the world.

The result of the this German-American collaboration is BLACKFIRE Polish. This formula offers the do-it-yourself enthusiast, as well as professional detailers a number of advantages:

• It will restore gloss and remove minor defects in clear coats.
• It will restore gloss and remove minor defects in the new scratch-resistant clear coats.
• It can be applied by hand, dual action polisher or circular polisher. (Machine application is required for maximum defect removal in harder clear coats.)

BLACKFIRE Polish will remove any existing wax or sealant and burnish the finish to a mirror-like shine. Applied by machine, it will remove 2500 grit swirls, spots, and scratches without hazing the finish. It is, in a word, remarkable.

BLACKFIRE Polish is recommended for use on all clear coat finishes. Containing no silicones or waxes, BLACKFIRE Polish is VOC Compliant and body shop safe.

Using BLACKFIRE Compound and BLACKFIRE Polish, Mike Phillips was able to completely remove the swirls and paint imperfections and polish to perfection the paint on this 1994 Z28 Camaro.

Directions for use:
Application by hand:
Apply with a dense foam applicator or microfiber applicator. mist clean pad with pad conditioner. Apply a nickel-sized amount of polish onto applicator. Work on a 2 x 2 sq. ft. area. Wipe polish over paint using short, firm strokes until polish starts to turn clear. Wipe off immediately using a microfiber towel. Application with a dual-action machine polisher: Work on a 2 x 2 sq. ft. area. Mist a clean foam polishing pad or finishing pad with pad conditioner. Apply an X of polish onto the pad. Spread the polish over one section with the machine turned off. Set the speed at 4-5 on a dual action polisher or 800-1,000 RPM on a rotary polisher. Work the polish over the surface until it begins to turn clear. Buff of polish by hand using a microfiber towel. After final buffing open all doors, the hood, and trunk and wipe body panel edges. Mist a detail brush with a quick-detail spray or residue remover and brush around emblems. Larger body moldings and wheel arch moldings can be cleaned with a quick-detail spray or residue remove or do what body shops do, mask off these moldings before you start polishing. Soak dirty foam pads in a bucket of soapy water (or with BLACKFIRE Citrus Pad Cleaner), agitate pads with your fingers, rinse with fresh water, hand squeeze out excess water and allow pads to air dry. After polishing, finish with a coat of your favorite wax or sealant. Made in Germany 8 oz."|"BLACKFIRE Scratch Resistant Clear Finishing Polish"|""|""|""|""|""|""|"(:SRC-FINISHING-POLISH :BF-220-128)"|""||""|""|""|""|""|""||0| bf-220-duo|BF-220-128-P|CUSTOM-ITEM|"BLACKFIRE Polish Duo Pack"|"https://www.blackfirewax.com/bf-220-duo.html"|(174.99)|(125)|T|""|""|""|""|""|"

Your first step to creating perfection on all paint finishes!

BLACKFIRE Polish uses nano abrasives to remove 2,500-3,000 grit sanding marks on fresh paints and to correct mild imperfections on cured paints. These fine abrasives burnish the finish to an incredible gloss! BLACKFIRE Polish can be used to refine the paint after compounding or as a one-step shine enhancing polish.

When used with an Orange Light Cutting Pad, swirl marks and other imperfections are removed with ease!

In 2005, Mercedes Benz started using a nano, ceramic particle, clear coat and in 2006 domestic automakers started using a super-hard, scratch-resistant clear coat developed by both PPG and BASF. These new clear coats are scratch-resistant, not scratch proof. They can still be scratched and spotted. The problem is polishing, or removing defects, in these new, super-hard clear coats. Conventional polishes may not have the cutting power to remove swirls, spots and defects in these new coatings.

BLACKFIRE Compound is designed for machine application with either a dual action or rotary/circular machine polisher. Most 2,000 grit and deeper swirls, scratches, spots and defects in ceramic particle and scratch-resistant clear coats cannot be removed by hand. BLACKFIRE Compound provides the muscle needed to level imperfections in all types of paint.

To stay on top of paint innovations, BLACKFIRE incorporated cutting edge German abrasives to develop a compound and polish to remove defects in the new nano ceramic particle clear coats. This new breed of polishes is currently used at the OEM level in various auto manufacturing plants worldwide and they are considered within the polishing industry to be the most advanced polishes in the world.

The result of the this German-American collaboration is BLACKFIRE Polish. This formula offers the do-it-yourself, enthusiast the ability to create a truly eye-popping shine! It restores gloss to ceramic particle clear coats, scratch resistant clear coats, as well as in more traditional single stage and two stage paint systems.

Flawless paint starts with BLACKFIRE Compound!

 

Directions for use:

Work out of direct sunlight.

For best results by hand apply BLACKFIRE Polish a microfiber applicator or foam applicator pad. Apply a nickel-sized amount of polish to the applicator and work one a 2 sq. ft. area at a time, using short firm strokes until the polish begins to dry. Buff off residues with by hand using a microfiber towel. For best results by machine polisher, apply with a polishing or finishing pad using a dual-action orbital or rotary polisher. Polish areas approximately 2 sq. ft. in size using moderate speed (speed 4-5 on a dual-action polisher or 800-1,000 rpm on a rotary polisher) working in overlapping passes until the polish becomes clear. Hand buff residue with a microfiber towel. Follow with BLACKFIRE Paint Sealant for an intense shine!

32 oz.

"|"BLACKFIRE Polish Duo Pack"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-polisher-compliment-kit|BF-PC-KIT|CUSTOM-ITEM|"Blackfire Polisher Compliment Kit"|"https://www.blackfirewax.com/bf-polisher-compliment-kit.html"|(59.98)|(47.99)|T|""|""|""|""|""|"The basic tools you need to make you car’s paint come alive!

If you want to make your car’s paint look wet, sleek and vibrant, then you need BLACKFIRE Paint Sealant. BLACKFIRE Paint Sealant uses advanced polymers over an increased surface area to create a super click surface. These special polymers also reflect and refract light, allowing for a unique glow. Beauty is not the only thing special about BLACKFIRE Paint Sealant, you also get unmatched protection and durability against acid rain, bug remains and other environmental contaminants. And of course, no product is complete without a microfiber companion. Use the Storm Gray Edgeless Microfiber towel for a perfectly buffed finish. The towel is soft to the touch, but a powerful force in buffing off any remaining residue. Plus, thanks to its unique edgeless design, you don’t have to worry about marring the surface when you wipe.

Items in this kit:

BLACKFIRE Paint Sealant

BLACKFIRE Paint Sealant is a premium paint sealant designed for the perfectionist. It creates an extremely slick finish and incredible depth with a revolutionary blend of three incredible polymers. Sourced from Germany and Switzerland, these polymers have a protective quality and depth of gloss that surpassed all others tested. BLACKFIRE Paint Sealant refracts light, similar to a diamond, to create a vibrant, super slippery, head-turning finish.

Storm Gray Edgeless Microfiber Towels

The Storm Gray Edgeless Microfiber Polishing Cloth is woven specifically for wax and polish removal. It has a soft touch that is extra gentle on sensitive clear coat finishes. Plus, the cloth has no edges, making accidental scratches virtually impossible. Use this cloth the next time you wax your vehicle and I promise you’ll never use anything else!

Kit includes

1 32 oz. BLACKFIRE Paint Sealant

3 16” x 16” Storm Gray Edgeless Microfiber Towels

A total retail value of $59.98. Save $11.99! "|"Blackfire Polisher Compliment Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-fine-clay|BF-515F|CUSTOM-ITEM|"BLACKFIRE Poly Clay"|"http://www.blackfirewax.com/blackfire-fine-clay.html"|(34.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"The fine-grade BLACKFIRE Poly Clay Bar creates the perfect foundation for a head-turning shine. This advanced synthetic clay bar removes the embedded paint contamination that car washing cannot, without scratching or dulling the most delicate paint finishes. Fine-grade BLACKFIRE Poly Clay works on all paint finishes, including clear coats. It is easy to work with and leaves almost no residue on the surface of the vehicle. Fine-grade BLACKFIRE Poly Clay does not dry out with age and does not decompose with repeated applications. Fine-grade BLACKFIRE Poly Clay I leaves auto paint feeling slick, clean, and silky.

Fine-grade BLACKFIRE Poly Clay removes what day to day driving puts into your vehicle’s paint. If you drive your car, it is going to collect paint contamination. There is no wax or paint sealant that can fully protect against contamination from rail dust, brake dust and environmental fallout. Most paint contamination consists of tiny metallic particles from brake pad linings and rail dust created from the friction of train wheels against railroad tracks. These hot metallic particles fill the air on highways and near railroad tracks where they ultimately land on your car's finish, burning through any wax or sealant coating and embedding themselves in the top paint or clear coat layer. Contaminants can be felt as a ""rough or gritty"" texture on the paint's finish.

Fine-grade BLACKFIRE Poly Clay is the latest in gentle-cleaning clay technology. It is the most recent innovation of the original detailing clay bars developed in Japan in the 1990s. It works by pulling contamination off the surface. It is not abrasive and does not remove the top paint layer.

Only detailing clay can make your vehicle feel silky smooth without polishing. Use fine-grade BLACKFIRE Poly Clay twice a year to enjoy the slickness and shine that comes from being truly clean.

Two 100 g. bars of fine-grade Poly Clay will clean up to 20 cars.

BLACKFIRE offers two versions of Poly Clay. First is the gray-colored PolyClay II, designed to remove moderate to heavy paint contamination quickly. Second is the green-colored Poly Clay – Fine Grade. This clay is ideal for light and maintenance cleaning and reduces the chance of inflicting surface marks on soft paints.

Directions:

For best results using BLACKFIRE Poly Clay – Fine Grade, mist a small area (2 sq. ft.) of the vehicle with BLACKFIRE Clay Lubricant and rub the clay bar over the surface. The clay will ""grab"" at first. Continue lightly rubbing the clay over the surface until it moves freely. When the bar moves freely, the surface is clean. Wipe off any residues with a microfiber towel and proceed to the next area.

If clay residues resist easy wipe-off, re-mist the cleaned area with Clay Lubricant and wipe with a clean microfiber towel. Even stubborn residues will wipe off easily.

2 x 100 grams

---

---

"|"BLACKFIRE Poly Clay – Fine Grade "|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-clay-kit|BF-515CF|CUSTOM-ITEM|"BLACKFIRE Poly Clay & Lubricant Combo - Fine Grade"|"http://www.blackfirewax.com/bf-clay-kit.html"|(68.96)|(49.99)|T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"The BLACKFIRE Poly Clay & Lubricant Combo includes:

2 x 100 gram BLACKFIRE Poly Clay Bar - Fine Grade
BLACKFIRE Poly Clay Bar is a premium, nonabrasive grade of detailing clay that works on all paint finishes, including clear coats. It is easy to work with and leaves almost no residue on the surface of the vehicle. Poly Clay does not dry out with age and does not decompose with repeated applications. BLACKFIRE Poly Clay Bar leaves auto paint feeling slick, clean, and silky.

32 oz. BLACKFIRE Clay Lubricant
BLACKFIRE Clay Lubricant has a polymer rich formula allows clay to glide over the surface without sticking or scratching. The clay lubricant provides a slippery coating between the clay bar and the paint to protect the paint from grit picked up by the clay. Cleaners in BLACKFIRE Clay Lubricant remove clay residue as you work, keeping the paint cleaner. The lubricants condition synthetic clay bars to extend their usable life.

2 Supreme 530 Microfiber Towels, 16 x 16 inches
No job is too big for the Supreme 530 Microfiber Towel! This ultra plush, ultra thick towel has a soft touch to pamper your vehicle as it buffs away waxes, polishes, and quick detailers or dries your vehicle to a spot-free shine. The unique blend of 75% polyester and 25% polyamide gives the towel a balance of softness and toughness to perform any detailing task. The Supreme 530 Microfiber Towel is made of heavy 530 g/m² microfiber.

Nothing leaves paint as smooth and clean as detailing clay. Use the BLACKFIRE Poly Clay & Lubricant Combo.

---

---

Directions:

Mist a small area (2 sq. ft.) of the vehicle with BLACKFIRE Clay Lubricant and rub the clay bar over the surface. The clay will ""grab"" at first. Continue lightly rubbing the clay over the surface until it moves freely. When the bar moves freely, the surface is clean. Wipe off any residues with a towel and proceed to the next area. If clay residues resist easy wipe-off, re-mist the cleaned area with Clay Lubricant and wipe with a clean microfiber towel. Even stubborn residues will wipe off easily.

Combo includes:
2 x 100 gram BLACKFIRE Poly Clay Bar - Fine Grade
32 oz. BLACKFIRE Clay Lubricant
2 Supreme 530 Microfiber Towels, 16 x 16 inches A total retail value of $68.96. Save $18.97!"|"BLACKFIRE Poly Clay & Lubricant Combo - Fine Grade"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-agressive-clay|BF-525|CUSTOM-ITEM|"BLACKFIRE Poly Clay - Aggressive"|"https://www.blackfirewax.com/blackfire-agressive-clay.html"|(29.99)||T|""|""|""|""|""|"Use clay to take the contaminants away!

BLACKFIRE Poly Clay Aggressive is an effective, and even fun, way to remove contaminants from the surface of your vehicle. BLACKFIRE Poly Clay Aggressive can conveniently be used on many different exterior surfaces of your car. BLACKFIRE Poly Clay Aggressive is a more intense clay that can remove medium to heavy contaminants. With BLACKFIRE Poly Clay Aggressive there is no excuse for dirty surface!

Just because a car looks great, doesn’t necessarily mean the car is actually clean. By gently rubbing your hand across the surface, you will be able to feel whether or not the surface is contaminated, depending on how rough it is. If your hand staggers across, it means it is time to clay!

BLACKFIRE Poly Clay Aggressive is a more rigorous type of clay that is designed to remove medium to heavily contaminated surfaces. Contaminants can include brake dust, tar, sap, insect remains, industrial fallout and more. Plus, BLACKFIRE Poly Clay Aggressive works on just about all your exterior surfaces, such as, paint, glass, chrome, fiberglass, aluminum, and other clear coated surfaces.

Claying your car with BLACKFIRE Poly Clay Aggressive can be a simple process, as long as the steps are done correctly. In any detailing procedure, it is best to wash and dry your car before claying it. Once the car is nice and clean, it’s time to clay. When you clay, be sure to keep the clay and the surface, lubricated with a dedicated clay lubricant to prevent marring. The clay will grab as it moves across your surfaces, which means your car is heavily contaminated. The more you clay, the less this will happen because you are eliminating the surface contaminants. As you go, continue to reshape the clay so that you get a fresh face with every panel. Once claying is complete, wipe away any remaining clay residue with a clean, microfiber towel. Just don’t drop the clay! If you do, it’s best to discard to avoid unwanted contaminants.

Once you finish claying, the ‘baggy test’ will help you see (technically, feel…) if your surface is contaminant free. Put your hand in a zip-lock bag, if you are able to easily glide across the surface, then you know, your surface is ready for the next correction step. Claying is a critical step to complete before moving on to any paint correction procedures, as paint correction needs a completely cleaned surface.

DIRECTIONS:

-Wash and dry vehicle.
-Spray area to be clayed with BLACKFIRE Clay Lubricant.
-Gently rub clay bar back and forth across wet surface.
-Clay will grab at first, continue moving the bar until it glides freely.
-Wipe off clay reside.
-Reshape bar often to reveal clean clay and keep clay well lubricated to avoid marring.

STORAGE:
Spray clay bar with lubricant prior to storage in this container. Do not allow to freeze. Do not store in temperatures exceeding 200 degrees F. Discard if dropped on the ground.

8 oz. bar"|"BLACKFIRE Poly Clay - Aggressive "|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-aggressive-poly-clay-pound|BF-525-LB|CUSTOM-ITEM|"BLACKFIRE Poly Clay Aggressive - 1 LB"|"https://www.blackfirewax.com/bf-aggressive-poly-clay-pound.html"|(49.98)|(39.99)|T|""|""|""|""|""|"Use clay to take the contaminants away!

BLACKFIRE Poly Clay Aggressive is an effective, and even fun, way to remove contaminants from the surface of your vehicle. BLACKFIRE Poly Clay Aggressive can conveniently be used on many different exterior surfaces of your car. BLACKFIRE Poly Clay Aggressive is a more intense clay that can remove medium to heavy contaminants. With BLACKFIRE Poly Clay Aggressive there is no excuse for dirty surface!

Just because a car looks great, doesn’t necessarily mean the car is actually clean. By gently rubbing your hand across the surface, you will be able to feel whether or not the surface is contaminated, depending on how rough it is. If your hand staggers across, it means it is time to clay!

BLACKFIRE Poly Clay Aggressive is a more rigorous type of clay that is designed to remove medium to heavily contaminated surfaces. Contaminants can include brake dust, tar, sap, insect remains, industrial fallout and more. Plus, BLACKFIRE Poly Clay Aggressive works on just about all your exterior surfaces, such as, paint, glass, chrome, fiberglass, aluminum, and other clear coated surfaces.

Claying your car with BLACKFIRE Poly Clay Aggressive can be a simple process, as long as the steps are done correctly. In any detailing procedure, it is best to wash and dry your car before claying it. Once the car is nice and clean, it’s time to clay. When you clay, be sure to keep the clay and the surface, lubricated with a dedicated clay lubricant to prevent marring. The clay will grab as it moves across your surfaces, which means your car is heavily contaminated. The more you clay, the less this will happen because you are eliminating the surface contaminants. As you go, continue to reshape the clay so that you get a fresh face with every panel. Once claying is complete, wipe away any remaining clay residue with a clean, microfiber towel. Just don’t drop the clay! If you do, it’s best to discard to avoid unwanted contaminants.

Once you finish claying, the ‘baggy test’ will help you see (technically, feel…) if your surface is contaminant free. Put your hand in a zip-lock bag, if you are able to easily glide across the surface, then you know, your surface is ready for the next correction step. Claying is a critical step to complete before moving on to any paint correction procedures, as paint correction needs a completely cleaned surface.

DIRECTIONS:
-Wash and dry vehicle.
-Spray area to be clayed with BLACKFIRE Clay Lubricant.
-Gently rub clay bar back and forth across wet surface.
-Clay will grab at first, continue moving the bar until it glides freely.
-Wipe off clay reside.
-Reshape bar often to reveal clean clay and keep clay well lubricated to avoid marring.

STORAGE:
Spray clay bar with lubricant prior to storage in this container. Do not allow to freeze. Do not store in temperatures exceeding 200 degrees F. Discard if dropped on the ground.

2 x 8 oz. bar"|"BLACKFIRE Poly Clay Aggressive - 1 LB"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-poly-clay-aggressive-special|BF-525-SP|CUSTOM-ITEM|"BLACKFIRE Poly Clay Aggressive Special"|"https://www.blackfirewax.com/blackfire-poly-clay-aggressive-special.html"|(75.95)|(49.99)|T|""|""|""|""|""|" The perfect clay trio!

Clay contaminants away with the BLACKFIRE Poly Clay Aggressive Special. The BLACKFIRE Medium Aggressive Clay is stronger than your average clay and can remove heavier contaminants. BLACKFIRE Clay Lubricant will help the clay glide smoothly over your surface without sticking or scratching. Remove any remaining lubricant residue with the soft touch of the Cobra Supreme 530 Microfiber Towel.

Items in this kit:

BLACKFIRE Medium Aggressive Clay
BLACKFIRE Poly Clay Aggressive is an effective, and even fun, way to remove contaminants from the surface of your vehicle. BLACKFIRE Poly Clay Aggressive can conveniently be used on many different exterior surfaces of your car. BLACKFIRE Poly Clay Aggressive is a more intense clay that can remove medium to heavy contaminants. With BLACKFIRE Poly Clay Aggressive there is no excuse for dirty surface!

BLACKFIRE Clay Lubricant
BLACKFIRE Clay Lubricant has a polymer-rich formula allows clay to glide over the surface without sticking or scratching. The clay lubricant provides a slippery coating between the clay bar and the paint to protect the paint from grit picked up by the clay. The lubricants condition synthetic clay bars to extend their usable life. Cleaners in BLACKFIRE Clay Lubricant remove clay residue as you work, keeping the paint cleaner and helping to create that ""smooth as glass"" surface.

Cobra Supreme 530 Microfiber Towel
The Supreme 530 Microfiber Towel pampers your vehicle with an ultra-soft and thick microfiber blend. The unique blend of 75% polyester and 25% polyamide gives the towel a balance of softness and toughness to perform any detailing task. Buff paint, dust the interior, clean glass, and dry your vehicle.

Kit includes
1 BLACKFIRE Medium Aggressive Clay
1 32 oz. BLACKFIRE Clay Lubricant
3 16x16” Cobra Supreme 530 Microfiber Towel

A total retail value of $70.95. Save $12.96! "|"BLACKFIRE Poly Clay Aggressive Special"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-poly-clay-fine-aggressive-combo|BF-CLAY-COMBO|CUSTOM-ITEM|"BLACKFIRE Poly Clay Fine & Aggressive Combo"|"https://www.blackfirewax.com/blackfire-poly-clay-fine-aggressive-combo.html"|(64.98)|(49.99)|T|""|""|""|""|""|" Clay away any contaminant strength!

The BLACKFIRE Poly Clay Fine Aggressive Combo brings you two strengths of clay to remove whatever contaminants your car may have on it. The BLACKFIRE Medium Aggressive Clay is a stronger clay that will remove medium to heavy contaminants, while the BLACKFIRE Poly Clay is meant for lighter issues.

Items in this kit:

BLACKFIRE Medium Aggressive Clay
BLACKFIRE Poly Clay Aggressive is an effective, and even fun, way to remove contaminants from the surface of your vehicle. BLACKFIRE Poly Clay Aggressive can conveniently be used on many different exterior surfaces of your car. BLACKFIRE Poly Clay Aggressive is a more intense clay that can remove medium to heavy contaminants. With BLACKFIRE Poly Clay Aggressive there is no excuse for dirty surface!

BLACKFIRE Poly Clay
The fine-grade BLACKFIRE Poly Clay Bar creates the perfect foundation for a head-turning shine. This advanced synthetic clay bar removes the embedded paint contamination that car washing cannot, without scratching or dulling the most delicate paint finishes. Fine-grade BLACKFIRE Poly Clay works on all paint finishes, including clear coats. It is easy to work with and leaves almost no residue on the surface of the vehicle. Fine-grade BLACKFIRE Poly Clay does not dry out with age and does not decompose with repeated applications. Fine-grade BLACKFIRE Poly Clay leaves auto paint feeling slick, clean, and silky.

Kit includes

1 BLACKFIRE Medium Aggressive Clay
1 BLACKFIRE Poly Clay

A total retail value of $54.98. Save $4.99! "|"BLACKFIRE Poly Clay Fine & Aggressive Combo"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-poly-clay-madness-bundle|BF-MAD-CLAY|CUSTOM-ITEM|"BLACKFIRE Poly Clay Madness Bundle"|"https://www.blackfirewax.com/blackfire-poly-clay-madness-bundle.html"|(125.93)|(89.99)|T|""|""|""|""|""|" Clay in different ways!

With the BLACKFIRE Poly Clay Madness Bundle, you get three ways to clay. First there is the BLACKFIRE Medium Aggressive Clay that you can use to remove medium to heavy contaminants. Then there is the BLACKFIRE Poly Clay that cleans lighter contaminants. If clay bars aren’t always your thing, this kit also includes the BLACKFIRE Clay Mitt, so that you can clay your car more easily with a mitt made of clay surface, that fit on your hand. No matter which you choose, use all products with the BLACKFIRE Clay Lubricant, that way your clay can glide smoothly and prevent scratching. Finish the job by using the Cobra Supreme 530 Microfiber Towel to remove any remaining residue.

Items in this kit:

BLACKFIRE Medium Aggressive Clay
BLACKFIRE Poly Clay Aggressive is an effective, and even fun, way to remove contaminants from the surface of your vehicle. BLACKFIRE Poly Clay Aggressive can conveniently be used on many different exterior surfaces of your car. BLACKFIRE Poly Clay Aggressive is a more intense clay that can remove medium to heavy contaminants. With BLACKFIRE Poly Clay Aggressive there is no excuse for dirty surface!

BLACKFIRE Poly Clay
The fine-grade BLACKFIRE Poly Clay Bar creates the perfect foundation for a head-turning shine. This advanced synthetic clay bar removes the embedded paint contamination that car washing cannot, without scratching or dulling the most delicate paint finishes. Fine-grade BLACKFIRE Poly Clay works on all paint finishes, including clear coats. It is easy to work with and leaves almost no residue on the surface of the vehicle. Fine-grade BLACKFIRE Poly Clay does not dry out with age and does not decompose with repeated applications. Fine-grade BLACKFIRE Poly Clay leaves auto paint feeling slick, clean, and silky.

BLACKFIRE Clay Lubricant
BLACKFIRE Clay Lubricant has a polymer-rich formula allows clay to glide over the surface without sticking or scratching. The clay lubricant provides a slippery coating between the clay bar and the paint to protect the paint from grit picked up by the clay. The lubricants condition synthetic clay bars to extend their usable life. Cleaners in BLACKFIRE Clay Lubricant remove clay residue as you work, keeping the paint cleaner and helping to create that ""smooth as glass"" surface.

BLACKFIRE Clay Mitt
BLACKFIRE Clay Mitt is a specialized wash mitt that uses an advanced rubberized material to safely remove embedded contaminants in your paint. This synthetic coating works the way a traditional clay bar does, but with a lot less mess! BLACKFIRE Clay Mitt will safely remove over-spray, road grime, dirt, industrial fall-out, tree sap and more with just one pass! Engineered as a two-in-one tool, the BLACKFIRE Clay Mitt works as both a wash mitt AND a method of decontamination!

Cobra Supreme 530 Microfiber Towel
The Supreme 530 Microfiber Towel pampers your vehicle with an ultra-soft and thick microfiber blend. The unique blend of 75% polyester and 25% polyamide gives the towel a balance of softness and toughness to perform any detailing task. Buff paint, dust the interior, clean glass, and dry your vehicle.

Kit includes
1 BLACKFIRE Medium Aggressive Clay
1 BLACKFIRE Poly Clay
1 BLACKFIRE Clay Mitt
1 32 oz. BLACKFIRE Clay Lubricant
3 16x16” Cobra Supreme 530 Microfiber Towel

A total retail value of $125.93. Save $35.94! "|"BLACKFIRE Poly Clay Madness Bundle"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-porter-cable-kit|PCBF-7200|CUSTOM-ITEM|"BLACKFIRE Porter Cable Swirl Remover Kit"|"http://www.blackfirewax.com/blackfire-porter-cable-kit.html"|(354.71)|(279.99)|T|"Porter Cable"|"Porter Cable"|""|""|""|"Put the sparkle back in your vehicle's paint with BLACKFIRE!

The BLACKFIRE Porter Cable Swirl Remover Kit combines the proven polishing technology of BLACKFIRE Scratch Resistant Clear Compound and Finishing Polish with the safe, steady motion of the Porter Cable polisher.

Porter Cable 7424XP Polisher  
The Porter Cable 7424XP Dual Action Polisher is a beefed up, more powerful version of our most popular dual action polisher. The Porter Cable 7424XP Dual Action Polisher has all the user-friendly features of the original Porter Cable 7424, but a 4.5 amp motor enables enhanced performance and durability. The Porter Cable 7424XP Dual Action Polisher operates from 2,500 OPM to 6,800 OPM to provide a faster removal rate. The 7424XP features all ball and roller bearing construction with spiral/bevel gears and an improved switch design. The buffer accepts a 5/16-24 spindle thread. The pad diameter is 6 inches. The polisher includes a wrench, counterweight installed, side handle, polishing pad, and a operating manual.

Dual Action 5” Flex Backing Plate
With hook facing, this plate allows you to switch pads quickly and continue polishing. A recessed edge and flexible urethane construction gives your paint extra protection from run-ins with the backing plate. Strict tolerances on weight, balance, roundness, and flatness ensure consistent performance time and time again. The backing plate has a 5/16 inch thread.

32 oz. BLACKFIRE Compound
BLACKFIRE Compound was developed using the latest German technology for OEM applications. It removes up to 1,000 grit sanding scratches on fresh paint and an impressive range of imperfections from cured paint finishes. Application is user-friendly with a dual-action orbital or rotary polisher. BLACKFIRE Compound is the first step in creating a head-turning shine!



32 oz. BLACKFIRE Polish
BLACKFIRE Polish uses nano-abrasives to remove 2500-3000 grit sanding marks on fresh paints and to correct mild imperfections on cured paints. These fine abrasives burnish the finish to an incredible gloss! BLACKFIRE Polish can be used to refine the paint after compounding or as a one-step shine enhancing polish.

32 oz. BLACKFIRE Synthetic Spray Wax
BLACKFIRE Synthetic Spray Wax creates a long lasting shine with a high concentration of BLACKFIRE’s amazing tri-polymer Wet Diamond polymers. This spray-on paint sealant contains light cleaners to remove dust and smudges while reinforcing and extending existing paint protection. Use it over waxes or paint sealants to maintain a fresh, clean shine all the time! Each bottle of BLACKFIRE Synthetic Spray Wax is packed with Wet Diamond polymers making this an excellent stand-alone sealant as well!

8 oz. BLACKFIRE Advanced Pad Cleaner
BLACKFIRE Advanced Pad Cleaner prolongs the usefulness of your buffing pads by removing product residues. When pads are cleaned thoroughly after every use, they maintain their texture and performance far longer. You'll save money and you'll get better results with your existing pads. Use Blackfire Advanced Pad Cleaner to clean foam and wool pads after every detail.

8 oz. BLACKFIRE Advanced Pad Conditioner
BLACKFIRE Advanced Pad Conditioner makes machine detailing easier by reducing friction between the pad and the paint. Products glide on more smoothly and the paint is protected from dry buffing. BLACKFIRE Advanced Pad Conditioner reduces skipping or sticking of the pad. Use it every time to prime your pads for perfection.

CCS 6.5 inch Orange Light Cutting Pad
When used with the proper polishing compounds, this orange pad removes 2000 grit sanding traces, swirls and paint defects with minimal or no surface dullness. This pad creates so little haze that you can often go from compounding right to finishing without the intermediate polishing steps. Where polishing is still required (often on black and red cars), it can be accomplished in a fraction of the time it would take with standard pads. Use this pad and polishing compound to remove swirls, water spots, and fine scratches.

CCS 6.5 inch White Polishing Pad
The most often used pad. This pad has a mild cutting (cleaning) action and should be used to apply light compounds, polishes and one-step, cleaner/waxes. Use this White CCS Polishing Pad to apply one-step, polish/sealants.

CCS 6.5 Inch Black Black Finishing Foam Pad
Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.

2 All Purpose Microfiber Towels (color may vary)
Use these microfiber detailing towels for drying, buffing, or as a finishing wipe down. Microfiber is designed to be light, strong, super-absorbent and quick drying. The fibers are non-abrasive, and are woven so tightly that it’s absolutely lint free and extremely durable. Unbelievably, these ultra-tough fibers are engineered to absorb seven times their weight in moisture.

Kit includes:
Porter Cable 7424XP Polisher  
Dual Action 5” Flex Backing Plate
32 oz. BLACKFIRE Compound
32 oz. Polish
32 oz. BLACKFIRE Synthetic Spray Wax
20 oz. Blackfire Wet Diamond Polymer Spray
8 oz. BLACKFIRE Advanced Pad Cleaner
8 oz. BLACKFIRE Advanced Pad Conditioner
CCS 6.5 inch Orange Light Cutting Pad
CCS 6.5 inch White Polishing Pad
CCS 6.5 Inch Black Black Finishing Foam Pad
2 All Purpose Microfiber Towels (color may vary)

Retail value of the kit is $354.71, giving you a savings of $74.72!

Additional discounts are not applicable on this item.
Please call 844-216-3966 for an expedited shipping quote on this item.

"|"Blackfire Porter Cable Swirl Remover Kit "|""|""|""|""|""|""|""|""||""|""|""|""|""|""|5|1| blackfire-foam-cannon-combo|BF-LS3-COMBO|CUSTOM-ITEM|"Blackfire Pressure Washer Foam Cannon HP Combo"|"https://www.blackfirewax.com/blackfire-foam-cannon-combo.html"|(149.98)|(119.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"Use your pressure washer to create foam that will cause whiplash!

The BLACKFIRE Foam Cannon Combo has everything you need to turn your pressure washer in to a high-powered foamer. The BLACKFIRE Pressure Washer Foam Cannon foams the included BLACKFIRE Foam Soap into a thick blanket of foam that coats your vehicle. All of that foam keeps the surface lubricated while any surface contaminants are loosened up so they can be safely rinsed away. The BLACKFIRE Foam Cannon Combo allows you to create a virtually touch free car wash in your own driveway!

The BLACKFIRE Foam Cannon Combo contains enough product to wash your vehicle again and again. BLACKFIRE Foam Soap is highly concentrated, so you’ll only need to use a small amount with each application. The pH-balanced formula will not strip any existing waxes or sealants, and contains natural conditioning agents to leave the paint shiny and slick. When paired with the BLACKFIRE Pressure Washer Foam Cannon, you’ve got a winning combination that will create whiplash!

The BLACKFIRE Foam Cannon Combo includes:

BLACKFIRE Pressure Washer Foam Cannon HP
Protect your vehicle while you wash with the BLACKFIRE Foam Cannon HP! This foam lance works with a pressure washer to produce a thick, clinging foam that lubricates the paint while you wash. Give your vehicle a touch-free wash with this high powered foam gun. The BLACKFIRE Foam Cannon HP will blow you away! The kit includes a solid brass male nipple and a common pressure washer fitting.

128 oz. BLACKFIRE Foam Soap
BLACKFIRE Foam Soap is a highly concentrated foaming shampoo formula that will create a mountain of suds for the ultimate car wash! Formulated using extreme lubricity agents, BLACKFIRE Foam Soap creates the perfect amount of tension on your car’s surface, allowing dirt and debris to be removed without harming your paint. BLACKFIRE Foam Soap can be used alone in your car wash bucket, but for extreme results, use with your favorite foam gun or foam cannon. Washing your car has never been more fun!

---

Not sure which fitting you need? We can help! The Foam Cannon HP attaches to the trigger/gun assembly for your pressure washer in the exact same way that your wand currently does.You will just need to remove the wand and look at the fitting that you currently have and match it up to one of the fitting that we offer below. The Foam Cannon HP will connect in exactly the same way. Note: If you have a Karcher K3 X Series pressure washer you will need the Karcher HD/HDS fitting in addition to the Karcher X Series fitting (Sold Separately). Click here for complete instructions.

---

Features:

Rated Pressure	160 bar - 16 MPa - 2,300 psi
1,100 - 5,000 PSI	1.8 - 5.3 GPM
140 degree temp	Adjustable Fan Blades (jet-wide)

---

This video was made by flipboy326

Compatible With Most Pressure Washers

Electric Pressure Washer Karcher, Husky, Troy Bilt and more	Gas Pressure Washer Honda, Husky, Troy Bilt, Dewalt, Craftsman, and more	Commercial Pressure Washers Porter Cable - Dewalt - RIDGID, Simpson and more

---

Combo Includes:
BLACKFIRE Pressure Washer Foam Cannon HP
128 oz. BLACKFIRE Foam Soap A total retail value of $149.98. Save $29.99! "|"Blackfire Pressure Washer Foam Cannon HP Combo"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-foam-cannon|BF-LS3-1|CUSTOM-ITEM|"BLACKFIRE Pressure Washer Foam Cannon HP Kit"|"http://www.blackfirewax.com/blackfire-foam-cannon.html"|(122.99)||T|"Blackfire Car Care"|"Blackfire Car Care"|""|""|""|"

The Blackfire Foam Cannon HP turns your pressure washer into a high powered foamer! The Foam Cannon HP is a lance that attaches to your pressure washer and works with a high yield car shampoo to blanket your vehicle in a thick flurry of high-lubricity foam to make washing easier, faster, and safer. The kit includes a solid brass male nipple and your choice of one pressure washer fitting to adapt the Foam Cannon HP to your pressure washer.

The thick foam created by the Foam Cannon HP offers several benefits and can be used to best suite your needs.

Use the Foam Cannon HP as a pre-rinse.
Blanket your car in a high-lubricity foam prior to rinsing your vehicle before you wash it. The foam will encase and loosen dirt, grit, and road grime. Then rinse the foam away prior to washing float the sharpest grit away from the paint prior to washing.

Use the Foam Cannon HP as a replacement for traditional bucket washing.
If your vehicle is lightly soiled then the Foam Cannon HP may be all you need to keep your vehicle swirl-free and clean. Rinse your vehicle to remove loose dirt then blanket it foam. Gently wash the surface using the foam, rinsing your wash mitt frequently. Then rinse away dirt and grime.

Use the Foam Cannon HP for a post polishing rinse.
Machine polishing your paint can cause dust to collect in every seam and leave behind oily residue. Foam every crease and crevice and pressure wash away to leave your paint clean and ready for final waxing.

Use the Foam Cannon HP around the house.
The Foam Cannon HP's ability to mix cleaning solutions into froathy foam has numerous benefits, from cleaning concrete to washing your house. The durable internals are chemical resistant although we recommend thoroughly cleaning and flushing the Foam Cannon HP out prior to switching back to automobile use.

For best results use a high yield car shampoo such as Detailer's Pro Series Xtreme Foam Formula in your Foam Cannon HP. This shampoo was developed specifically for foam guns and produces an incredible amount of foam. It may take some experimentation to get your preferred dilution, but start with 1 ounce of shampoo. Pour the shampoo into the Foam Cannon HP tank, hook it up to your pressure washer, and let the foam fly!

To maintain your Foam Cannon HP, rinse it out after every use. Six fittings are available for purchases separately for virtually any pressure washer. A brass male nipple is included to connect the fitting to the Foam Cannon HP.

Choosing the correct fitting.

The Foam Cannon HP attaches to the trigger/gun assembly for your pressure washer in the exact same way that your wand currently does. You will just need to remove the wand and look at the fitting that you currently have and match it up to one of the fitting that we offer below. The Foam Cannon HP will connect in exactly the same way.

Click here for complete instructions.

"|"Blackfire Pressure Washer Foam Cannon HP Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-ceramic-bug-kit|BF-BUGCERA|CUSTOM-ITEM|"BLACKFIRE Pro Ceramic Bug Removal Kit"|"https://www.blackfirewax.com/bf-ceramic-bug-kit.html"|(110.94)|(69.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"Perfect to help your coating make it through love-bug season!

The BLACKFIRE Pro Ceramic Bug Removal Kit designed for those of us who have a ceramic coating and live in an area that has a large bug problem. States like Florida, Louisiana, and Texas have a very large bug problem, so living in these states or similar areas and upkeeping your ceramic coating through the smattering of acidic bug remains can be quite difficult! But worry not, The BLACKFIRE Pro Ceramic Bug Removal Kit will give you all the supplies you’ll need to keep the bugs off your car AND maintain your ceramic coating for added durability to your coating!

Items in this kit:

BLACKFIRE Pro Ceramic Coating Wash
BLACKFIRE Pro Ceramic Coating Wash is the perfect complementary product for BLACKFIRE Pro Ceramic Coating, as well as any other ceramic paint coating. The thick, sudsy, pH-neutral formula of BLACKFIRE Pro Ceramic Coating Wash will remove surface contamination like dirt, dust, mud, road grime, and more without affecting your coating’s hydrophobicity, protection, or shine. Highly concentrated and featuring the ability to easily be used in Foam Guns or Cannons, BLACKFIRE Pro Ceramic Coating Wash can be used by both professional detailers and enthusiasts alike to keep your BLACKFIRE Pro Ceramic Coated vehicle clean and shining!

BLACKFIRE Bug Remover
BLACKFIRE Bug Remover is a gentle cleaning formula that will safely and effectively remove insect remains from your vehicle’s paint, glass, plastic, vinyl, and aluminum surfaces. BLACKFIRE Bug Remover is concentrated to double your cleaning power with just one spray and can be tailored to meet your specific needs. Use BLACKFIRE Bug Remover as a spot treatment immediately after contact, or as a pre-treatment to make your washes even more effective!

Blackfire Coating Booster
BLACKFIRE Coating Booster is a maintenance product designed to keep your ceramic, quartz, or resin-based coatings in perfect working order! Manufactured using pH neutral ingredients, BLACKFIRE Coating Booster will not harm your paint coating in any way – in fact, it does the complete opposite! BLACKFIRE Coating Booster will enhance your coating’s natural water sheeting and beading qualities while boosting the protection and durability. If you have a coated vehicle, you need the BLACKFIRE Coating Booster!

Blackfire Bug and Tar Eliminator
The BLACKFIRE Bug & Tar Eliminator Sponge is a firm foam block with a dense honeycomb structure. When allowed to soak in soapy water, the foam softens to avoid scratching the paint, while remaining strong enough to remove embedded bug remains and tar. In most cases the BLACKFIRE Bug & Tar Eliminator Sponge is so effective that you can use your regular car wash solution for cleaning.

Supreme Guzzler Waffle Weave
The Supreme Guzzler is 20% thicker than the original towel to give it an even greater capacity for moisture. At approximately 5.5 square feet, this waffle weave towel can dry most small cars without being rung out once! As you may well know, microfiber is made of two synthetic fibers: polyester and polyamide. Polyester accounts for the towel's durability and polishing properties while polyamide is silky soft. The plush 80/20 weave of the two fibers allow the towel to hold a tremendous amount of water; seven times its own weight!

Supreme Micro-Chenille Wash Mitt
Our Supreme Micro-Chenille Wash Mitt has 40% larger microfiber fingers than our standard micro-chenille wash mitts! This wash mitt has all the paint-pampering features of the original mitt plus superior durability and a larger size. The Supreme Micro-Chenille Wash Mitt lathers your vehicle in suds for a safe, swirl-free wash!

Kit includes
BLACKFIRE Pro Ceramic Coating Wash 32oz.
BLACKFIRE Bug Remover 32oz
Blackfire Coating Booster 4oz
Supreme Guzzler Waffle Weave 20x40
Blackfire Bug and Tar Eliminator
Supreme Micro-Chenille Wash Mitt

A total retail value of $110.94. Save $69.99! "|"BLACKFIRE Pro Ceramic Bug Removal Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-ceramic-cleaning-protecting-kit|BF-PROSIOKT|CUSTOM-ITEM|"BLACKFIRE Pro Ceramic Cleaning & SiO2 Protecting Kit"|"https://www.blackfirewax.com/bf-ceramic-cleaning-protecting-kit.html"|(93.95)|(79.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"SiO2 protection without the hassle of a ceramic coating!

The BLACKFIRE Pro Ceramic Cleaning & SiO2 Protecting Kit was designed for the weekend warrior who wants to take advantage of the hydrophobicity and protection that SiO2 offers, without needing the expertise it takes to apply a ceramic coating! The BLACKFIRE Pro Ceramic Cleaning & SiO2 Protecting Kit contains two easy-to-use products that are infused with SiO2 that will provide the same level of protection without much extra work on your part! BLACKFIRE Pro Ceramic Wash and BLACKFIRE Hydro Concentrate are both simple and effective products that can be incorporated into your weekly car care routine and will have a huge impact on the protection of your car!

Items in this kit:

BLACKFIRE Pro Ceramic Coating Wash
The thick, sudsy, pH-neutral formula of BLACKFIRE Pro Ceramic Coating Wash will remove surface contamination like dirt, dust, mud, road grime, and more without affecting your coating’s hydrophobicity, protection, or shine. Highly concentrated and featuring the ability to easily be used in Foam Guns or Cannons, BLACKFIRE Pro Ceramic Coating Wash can be used by both professional detailers and enthusiasts alike to keep your vehicle clean and shining!

BLACKFIRE HydroSeal Concentrate
BLACKFIRE HydroSeal Concentrate is already such an incredible product, the only way it could be made better is to make it even more affordable than it already is! BLACKFIRE HydroSeal Concentrate gives both the professional detailer and detailing enthusiast the ideal protection at the ideal price! With a dilution ratio of 1:7, a mere 4 oz. of BLACKFIRE HydroSeal Concentrate can give up a full 32 oz. of pure SiO2 protection! BLACKFIRE HydroSeal Concentrate is an expertly formulated product designed to make applying durable SiO2 protection to your paint easier than it has ever been. A simple spray and rinse application means you can provide intense hydrophobic properties to your entire paint surface in mere minutes!

Supreme Guzzler Waffle Weave
The Supreme Guzzler is 20% thicker than the original towel to give it an even greater capacity for moisture. At approximately 5.5 square feet, this waffle weave towel can dry most small cars without being rung out once! As you may well know, microfiber is made of two synthetic fibers: polyester and polyamide. Polyester accounts for the towel's durability and polishing properties while polyamide is silky soft. The plush 80/20 weave of the two fibers allow the towel to hold a tremendous amount of water; seven times its own weight!

36 Ounce Detail Bottle
You can use it to spray both interior and exterior detail chemicals when cleaning your car. This bottle is also useful around the house and yard. The 36 ounce bottle is constructed of PVC for extra durability. If you need to dilute concentrated liquids, the bottle also has a handy chart to follow on it's side with dilution ratios of 1-1 to 1-10.

Lake Country Wash Wedge
The Lake Country Wash Wedge is an ingeniously designed gold foam wash sponge that features cross-cut and slotted grooves for safe, effective dirt removal. Constructed entirely out of premium gold foam, Lake Country’s softest foam, the Wash Wedge pampers your vehicle’s delicate finish to ensure the paint remains swirl and scratch free after every wash. Comfort-grip neoprene foam handle makes the Wash Wedge easy to hold on to, even with soapy hands.

Kit includes
1 x BLACKFIRE Pro Ceramic Coating Wash 32oz.
1 x BLACKFIRE Hydro Concentrate 4oz.
1 x Supreme Guzzler Waffle Weave 20x40
1 x 36 Ounce Detail Bottle
1 x Lake Country Wash Wedge

A total retail value of $93.95. Save $28.96! "|"BLACKFIRE Pro Ceramic Cleaning & SiO2 Protecting Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| blackfire-pro-ceramic-coating|BF-280|CUSTOM-ITEM|"BLACKFIRE Pro Ceramic Coating"|"https://www.blackfirewax.com/blackfire-pro-ceramic-coating.html"|(79.99)||T|"BLACKFIRE"|"BLACKFIRE"|""|""|""|"Perfect for the professional or the enthusiast!

BLACKFIRE Pro Ceramic Coating perfectly combines ease of use and professional results to provide you with high-quality and consistent protection for years! Due to the lack of aromatic solvents and fluorine in its formula, BLACKFIRE Pro Ceramic Coating can even be applied indoors without any risks to your safety. BLACKFIRE Pro Ceramic Coating uses thermoplasticity to produce a protective shell that possesses 9H+ level hardness and a lifetime of up to 2 years. Its amazing balance between hardness and flexibility makes BLACKFIRE Pro Ceramic Coating especially resistant to abrasion and corrosion!

The introduction of ceramic coatings into the automotive detailing industry has pushed the limits of the level of protection that is available. When the expected life-time of these coatings is measured in years, it is difficult to shy away from the protection that they offer. There is one major downfall that these ceramic coatings tend to have in common though, they are much more difficult to apply than your standard car wax. When the BLACKFIRE Pro Ceramic Coating was being formulated, maximizing the ease of use was a crucial aspect to achieve, and achieved it was. BLACKFIRE Pro Ceramic Coating was formulated without any aromatic solvents that would otherwise negatively affect the consistency and viscosity of this product, drastically increasing how difficult it is to apply.

BLACKFIRE Pro Ceramic Coating provides and increased level of protection compared to what you would typically receive from a ceramic coating. This increase in protection is due to the unique thermoplastic components used in the formulation of BLACKFIRE Pro Ceramic Coating. This thermoplastic component works on the molecular level to form a cross-linked matrix that is capable of flexing with your paint surface. The cross-linked structure of this matrix is what provides the incredible 9H+ hardness level that BLACKFIRE Pro Ceramic Coating boasts, while the ability to flex with your paint gives it the durability to protect your paint for up to 2 years. Of course, all the while, this matrix will repel any moisture away from your paint surface, causing water to bead and sheet off!

---

---

If you are a person who takes great care of their vehicle, it is unlikely that applying a ceramic coating will be the last thing you do to your vehicle. Your maintenance washes and chemical decontaminations will likely continue so you can maintain the best shine possible. These highly corrosive and abrasive processes would typically break down most protective products and cut the lifetime of them in half. The chemical composition of BLACKFIRE Pro Ceramic Coating allows it to resist the damage that these necessary processes tend to create, allowing it to far outlast the point where other protective products would begin to breakdown and fail!

Directions:
Prior to applying BLACKFIRE Pro Ceramic Coating, wash, decontaminate, and prep your surface with BLACKFIRE Pro Primer Polish or BLACKFIRE Prep Spray to remove any oils from the paint. Shake this product well before use. Wrap a suede towel around a foam applicator block and apply a straight line of product onto the towel. Working in a 3’ x 3’section, apply the product to the paint in straight lines with a 50% overlap between strokes. Allow BLACKFIRE Pro Ceramic Coating to flash then gently buff the surface with a soft, dry microfiber towel. Switch to a clean side of the towel frequently to avoid streaking. If you would like to apply a second coat, you may do so immediately after the first. Allow this product to cure for 12 hours before exposure to moisture. Avoid washing your vehicle for 72 hours after application.

50 ml. Federal regulations prohibit the shipment of this products by air, 3 Day, 2 Day, or US Mail. This item is shipped by Ground only. Sorry but no APO or FPO addresses."|"BLACKFIRE Pro Ceramic Coating"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-ceramic-black-edition-application-kit|BF-190-KIT|CUSTOM-ITEM|"BLACKFIRE Pro Ceramic Coating BLACK EDITION Application Kit"|"https://www.blackfirewax.com/bf-ceramic-black-edition-application-kit.html"|(113.97)|(99.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"Your BLACKFIRE Coating Essentials

The basics are strong with this BLACKFIRE Pro Ceramic Coating Black Edition Application Kit. The BLACKIFRE Pro Ceramic Coating Black Edition will provide your car with excellent durability, shine and water sheeting that can last up to five years! Perfect the perfect application by applying with the Blue Microfiber Coating Applicator.

---

---

Items in this kit:

BLACKFIRE Pro Ceramic Coating BLACK EDITION
BLACKFIRE Pro Ceramic Paint Coating Black Edition is a 9H formula that can last up to 5 years, all with a five-minute working time to allow for a fully body panel coverage. Unique in its formula, the product sweats into beads, rather than the typical flashing style. BLACKFIRE Pro Ceramic Paint Coating Black Edition is a professional grade paint coating and will protect the paint from environmental contaminants. BLACKFIRE Pro Ceramic Paint Coating Black Edition will also sheet water and provide a brilliant shine. Easy-to-apply as you work larger panels at a time.

Blue Microfiber Coating Applicator
The Microfiber Coating Applicator is designed to fit perfectly in your hand and apply coatings to the surface of your vehicle without streaking or leaving unwanted build-up behind! This Microfiber Coating Applicator is soft and durable to give you a perfectly even coat every single time.

Kit includes
1 50 mL. BLACKFIRE Pro Ceramic Coating BLACK EDITION
2 Blue Microfiber Coating Applicator

A total retail value of $113.97. Save $13.98! "|"BLACKFIRE Pro Ceramic Coating BLACK EDITION Application Kit"|""|""|""|""|""|""|""|""||""|""|""|""|""|""||0| bf-pro-coating-black-edition-kit|BF-190-CCC-KIT|CUSTOM-ITEM|"BLACKFIRE Pro Ceramic Coating BLACK Edition Kit"|"https://www.blackfirewax.com/bf-pro-coating-black-edition-kit.html"|(180.9)|(134.99)|T|"BLACKFIRE Car Care"|"BLACKFIRE Car Care"|""|""|""|"BLACKFIRE ceramic coating starter kit!

If you are looking for the perfect starter kit to a ceramic coating, then look no further than the BLACKFIRE Pro Ceramic Coating BLACK Edition Kit. BLACKFIRE Pro Ceramic Coating Black Edition boosts a 9H formula that is not only durable but promotes water sheeting and a brilliant shine. Use the Blue Microfiber Terry Coating Applicator to properly apply the coating. But first, use BLACKFIRE Paint Prep first to prep the surface by removing fingerprints, dust and polishing oils. Buff away any remaining residue with the Cobra Supreme 530 Microfiber Towel.

---

---

Items in this kit:

BLACKFIRE Pro C