Lake Country 6.5 inch Flat Foam Pads

Lake Country Flat Foam Pads are made of imported German foam. These 6.5” pads have been improved with hook and loop fasteners edge to edge. Lake Country pads reduce heat build-up and spontaneous heat transfer between the machine and the pad. More pad-to-paint contact allows you to work more efficiently than you could with variable contact pads.

An advanced bonding system permanently attaches the hook & loop material to the pad to prevent slipping and detachment. Advanced foam compositions and user-friendly design will make your polishing experience safer for your vehicle and easier for you.

The Lake Country Dual Action 6.5 inch Pads are available in these types of foam:

Yellow Cutting Foam 6.5 inch Pad - Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches. It is the most aggressive and should only be used on oxidized and heavily swirled finishes. Always follow this pad with a white or gray pad and a fine polish to refine the paint until it is smooth.

Orange Light Cutting Foam 6.5 inch Pad - Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections.

White Flat Heavy Polishing Foam 6.5 inch Pad - High absorption foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so its perfect for pre-wax cleaners.

Green Flat Polishing/AIO Foam 6.5 inch Pad - Use this foam to apply one-step cleaner waxes. It is a balance of polishing and finishing that is perfect for all-in-one product application.

Blue Light Polishing Foam 6.5 inch Pad – This pad is not as dense as the green polishing pad and provides little cutting ability. Generally used to polish to perfect, this pad will leave a high shine on the surface. Perfect for use with a finishing glaze, last-step polish, and some all-in-one cleaner polishes.

Black Finishing Foam 6.5 inch Pad - Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.